Product Specification < MWG3401NM > Single-Band Draft-802.11n 2x2 MIMO Half Mini Card (PCI-express) Wireless Network Adapter Version: 1.0.2 This confidential information is the property of Metalligence Technology Corporation. All contents of this document can not be disclosed to unauthorized persons without the written consent of Metalligence Technology Corporation.
Product Specification for MWG3401NM Content Page 1 Product Description …………………………………………. 4 2 Application …………………………………………. 4 3 Features …………………………………………. 4 4 Product Specifications …………………………………………. 5 5 Mechanism & Packaging 6 7 5.1 PCB Dimension …………………………………………. 6 5.2 Product Label …………………………………………. 6 Physical & Environment 6.1 Operation Temperature & Humidity ………………………. 8 6.2 Storage Temperature & Humidity ……………………….
Product Specification for MWG3401NM Change History Version Revised Date Editor 1.0.0 2009/10/12 Cathy Tseng First Edition (baseline) 1.0.1 2009/10/16 Cathy Tseng Modify Product Specifications 1.0.2 2009/12/25 Cathy Tseng Modify Product Specifications Metalligence Confidential 3/9 Content Revised Rev.:1.0.
Product Specification for MWG3401NM 1 Product Descriptions The MWG3401NM provides ultra-high performance (up to 300 Mbps) transmission rate in the 2.4GHz band. Backward compatible with the current 802.11b/g/n network devices gives your laptop the freedom of wireless connectivity with the performance, security, and manageability that businesses desire. A firmware-based architecture is capable of supporting the latest industry standards in the security and quality of service (QoS), as the draft 802.
Product Specification for MWG3401NM 4 Product Specifications Main Chip WLAN Standards BCM43225 IEEE 802.11b/g/n compliant Antenna External antenna & IPEX connector Modulation Operating Frequencies 802.11b: CCK(11&5.5 Mbps), DQPSK (2Mbps), DBPSK (1Mbps), 802.11g/n: DBPSK, DQPSK, OFDM, BPSK, QPSK, 16QAM, 64QAM 2412 ~ 2462 MHz for North America 2412 ~ 2472 MHz for Europe 2412 ~ 2484 MHz for Japan Frequency Band 2.
Product Specification for MWG3401NM 5 Mechanism & Packaging 5.1 PCB Dimension - 26.65mm x 29.85mm 5.2 Packing - Carton dimension：406mm x 268mm x 182mm 6 Physical & Environment 6.1 Operation Temperature & Humidity - Temperature：32℉ to 104℉ (0 ℉ to 40 ℉) Humidity：10% ~ 90% R.H. 6.2 Storage Temperature& Humidity - Temperature：-4℉ to 158℉ (-20 ℉ to 70 ℉) Humidity：10% ~ 95% R.H. Metalligence Confidential 6/9 Rev.:1.0.
Product Specification for MWG3401NM 7 Compliance Note：Product was designed to comply with below regulation. While the formal certificate process will be performed under customer request only.
Product Specification for MWG3401NM Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Product Specification for MWG3401NM This device is intended only for OEM integrators under the following conditions: 1) The antenna must be installed such that 20 cm is maintained between the antenna and users, and 2) The transmitter module may not be co-located with any other transmitter or antenna, 3) For all products market in US, OEM has to limit the operation channels in CH1 to CH11 for 2.4G band by supplied firmware programming tool.
