Product Overview

ManualsBrandsMetacaulk ManualsFirestop Pipe Collars4" Firestop Pipe Collar

PRODUCT DATA SHEET

METACAULK

PIPE COLLAR

Prefabricated restop system

December 2017

3. Applications

Metacaulk

Pipe Collars are used to

seal off plastic pipe both in closed

and vented (DWV) conditions. Also

for use on up to 6" (152 mm) diameter

ABS (cellular core or solid core),

FRPP, PVC and CPVC pipe. The

collar may be used on up to 3 hour

rated concrete ﬂoors and walls, up

to 2 hour rated gypsum walls and up

to 2 hour rated wood ﬂoors.

4. Installation Data

Metacaulk

Pipe Collar are preﬁlled

and very easy to install.

1) Select the proper collar to ﬁt the

diameter of pipe used.

2) Making sure annular space is

within the limits set by the tested

conditions, attach collar around

the pipe on the underside of the

ﬂoor or to each side of a wall by

ﬁrmly placing against the wall or

ﬂoor and securing interlocking

tabs [1 1/2" (38 mm), 2" (51 mm),

3" (76 mm) and 4" (102 mm)] or

fastening the buckle [6" (152

mm)].

3) If needed, mark and predrill wall

or ﬂoor for required anchors.

Properly secure the appropriate

anchor into each of the anchoring

tabs. In concrete, use 1/4" (6 mm)

x 1 1/4" (32 mm) hex washer

head type concrete anchors or

appropriate steel expansion/

w e d g e anchors. In gypsum, use

1/8" (3 mm) x 2" (51 mm)MOLLY

type hollow wall anchors or 1

1/2" drywall or drywall laminating

screws. Fender washers have

been provided to be used with

the fasteners.

4) If an additional smoke seal is

required, Metacaulk

1000 may

be applied within the annular

space before the attachment of

the collar.

Consult UL Directory for complete

instructions and system

listings.

5. Testing Data

Metacaulk

Pipe Collars are

classified by Underwriters

Laboratories as a Firestop Device.

For speciﬁc test criteria, see the

UL Fire Resistance Directory or

1. Product Description

Metacaulk

Pipe Collars are

prefabricated for open and closed

through-penetration ﬁrestop systems

using 1 1/2"(38 mm) to 6" (152 mm)

plastic pipe. An easy locking tab

assures easy installation. The collar

design greatly reduces the time and

expense that is required to install

competitive collars.

Metacaulk

Pipe Collar

Features

• Saves on Labor Cost

• Easy Installation

• Economical

• No Measurement of Material

Required

• Highly Intumescent

• Tested for PVC, CPVC, ABS and

PVC/ABS Foam Core, FRPP

2. Material Properties

Asbestos Fillers None

Solvents None

Hazardous Ingredients None

Activation of Intumescence:

Expansion Begins 375˚F (190˚ C)

Expansion Greatest 575˚ (302˚ C) to

1100˚F (593˚ C)

For list of systems see metacaulk.com.

Summary of content (2 pages)

PAGE 1
December 2017 P R O D U C T D ATA S H E E T For list of systems see metacaulk.com. METACAULK® PIPE COLLAR Prefabricated firestop system 1. Product Description Metacaulk ® Pipe Collars are prefabricated for open and closed through-penetration firestop systems using 1 1/2"(38 mm) to 6" (152 mm) plastic pipe. An easy locking tab assures easy installation. The collar design greatly reduces the time and expense that is required to install competitive collars.
PAGE 2
METACAULK® PIPE COLLAR call RectorSeal. Metacaulk® Pipe Collars were tested at a minimum .01 inches (2.5 Pa) of water positive pressure in accordance with UL 1479 (ASTM E814) test standards. Tested to Can/ULC-S115 (Fire Tests of Firestop Systems) test standards. Complies to Required Environmental Exposure Testing of Accelerated Aging and High Humidity as per UL 1479 Fire Test of Through-Penetration Firestops.