"Patio+" Indoor/Outdoor Water-Resistant Speakers (Set of 2) User’s Guide for Model ISBW763BDL-3017 For the most up-to-date version of this User’s Guide, go to: www.iLiveElectronics.
Safety Instructions & Warnings Important Safety Instructions • • • • • • • • • • • • • • 2 Read these Instructions. Keep these Instructions. Heed all Warnings. Follow all instructions. Do not use this apparatus near water. Clean only with a dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
FCC Warnings Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Table of Contents Contents Features & Specifications - 5 Includes - 5 Orientation Left Speaker Rear View - 6 Left Speaker Front View - 6 Right Speaker Rear View - 6 Remote Functions & Controls - 7 Remote Battery - 7 Connecting Your Speakers Connect Your Speakers - 8 Connect Your Speaker to Power - 8 Connect with Bluetooth - 8 Mounting Your Speakers Placing Your Speakers - 9 Attaching the Mounting Hardware -9 Attaching Your Speakers -9 Positioning Your Speakers Angling Your Speakers (FPO) - 10 Troubleshootin
Contents Features & Specifications Includes • Supports Bluetooth v5.0, range 100ft • Speakers (Set of 2) • IP44 water-resistant • Remote control with CR2025 battery (included) • Protective UV cabinet • DC adapter with waterproof plug • Powder-coated, rustproof aluminum grill • 25' connecting wire • Built-in 5.
Orientation Left Speaker Rear View Speaker-to-Speaker Positive Connection Port (Red) Speaker-to-Speaker Negative Connection Port (Black) DC In Port Power On/Off Switch Left Speaker Front View LED Indicator Light Right Speaker Rear View Speaker-to-Speaker Positive Connection Port (Red) Speaker-to-Speaker Negative Connection Port (Black) 6
Remote Functions & Controls Power Press to turn the unit on or off. Volume +/Press to adjust the volume. Pair Press to select Bluetooth Mode. The indicator light on the front of the speaker will turn blue. Press and hold to disconnect from a Bluetooth device and enter pairing mode. Bass +/Press to adjust the bass up or down. Mute Press to mute the volume. Play/Pause Skip Forward Skip Backward Press the Play/Pause button to start, stop, and resume playback.
Connecting Your Speakers Connect Your Speakers Connect the speakers using the included speaker cable. 1. Plug the red end of the connection cable into the red port on the back of the left speaker. 2. Plug the black end of the connection cable into the black port on the back of the left speaker. 3. Connect the red plug on the other end of the cable to the red port on the back of the right speaker. Then, connect the black plug to the black port. Connect Your Speaker to Power 1.
Mounting Your Speakers Placing Your Speakers These speakers feature an IP44 water-resistant protection, UV resistant coating, and a powder-coated, rustproof grill for outdoor use. If you choose to mount the speakers outside, place them in a covered setting or somewhere sheltered from rainfall, splashing, or spills. Note: Remember to keep the distance between the speakers under 25ft. for the connection cables. Attaching the Mounting Hardware This speaker set comes with four screws and four external anchors.
Positioning Your Speakers To change the angle of your speakers, loosen the anchors and gently turn the speaker to face your desired direction. Retighten the anchors once the speaker is in place. Note: Speakers can only swivel when mounted vertically. The position of your speakers can affect the sound quality of your audio. Here are some points to keep in mind. • If possible, mount your speakers at ear-level in the listening area. • Point both speakers inward toward the listening area.
Troubleshooting PROBLEM Speaker will not power on POSSIBLE SOLUTION • Make sure the AC/DC plug is plugged in and connected to the left speaker • If using the remote to try powering on the speaker, check if the remote battery needs to be changed. • Check for water damage: this product is water resistant, but not fully waterproof. Sound skipping/Audio doesn't play • Turn the speakers off and then on again. • Check for water damage and dry off speaker.
Company Information Contact Information Warranty Website: www.iLiveElectronics.com For Warranty Information and the most up-to-date version of this User’s Guide, go to: www.iLiveElectronics.com Email Support: prodinfo@dpiinc.com Email Parts: partsinfo@dpiinc.com Phone Support: 1-888-999-4215 Made Green Protect for Today Sustain for Tomorrow Copyright © 2022 Digital Products International (DPI, Inc.) All other trademarks appearing herein are the property of their respective owners.