MODEL NO. RPJ060 PORTABLE PROJECTOR ENTERTAINMENT SYSTEM PLEASE READ BEFORE OPERATING THIS EQUIPMENT This product is manufactured and sold by Curtis International Ltd.RCA, the RCA logo, the two dogs (Nipper and Chipper) logo, are registered trademarks or trademarks of RCA Trademark Management and are used under license by Curtis International Ltd.
Important Safety Instructions 1. Read these Instructions. 2. Keep these Instructions. 3. Heed all Warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with a dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifier) that product heat. 9.
Additional Warnings and Precautions 1. Do not look directly into the projector light. 2. Don’t touch the project lens 3. Mains adapter is used as disconnect device and it should remain readily operable during intended use. In order to disconnect the apparatus from the mains completely, the mains plug should be disconnected from the mains socket outlet completely. 4.
FCC Warning This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
Table of Contents Important Safety Instructions P1 Additional Warnings and Precautions - - - - - - - - - - - - - - - - - - - - P2 FCC Warning - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - P3 In The Box - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - P3 Table of Contents - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - P4 Remove & Close the Lens Cover - - - - - - - - - - - - - - - - - - - - - - - - P5 Placing
Remove & Close The Lens Cover Remove the lens cover before using Close the lens cover when unit not using CLOSE REMOVE LENS COVER LENS COVER VOL PAIR POWER VOL OK PAIR POWER OK VOL VOL Placing of Your Projector Your projector can be installed in four different configurations (see picture below): Front Table Rear Table Front Table: Select this location with the projector placed near the floor in front of the screen.
Distance Between the Projector and Screen Measure the distance between the projector and where you want to position the screen. This is the projection distance for reference. SCREEN SIZE Distance 1.16m 1.35m 1.51m 1.79m 2.15m 2.81m 3.43m 4.44m DISTANCE Screen Size 37inch 45 inch 50 inch 60 inch 72 inch 100 inch 120 inch 150 inch Adjust The Focus And Keystone Follow below picture to adjust the focus and trapezoidal screen.
Controls of Remote MUTE MUTE FLIP FLIP PROJ PROJECTOR ON/OFF PROJ SOURCE MUTE AUDIO SOUND SOURCE OK OK OK EXIT EXIT MENU MENU ZOOM PAIR ZOOM SCREEN SIZE BT PAIR PAIR ZOOM Install / Remove Batteries of Remote Remove the battery compartment cover on the back of your remote by carefully sliding to open. The battery cover can then be lifted away. Fit the correct batteries (not included), referring to the polarity markings. Finally, replace the cover.
Controls of Projector FRONT VIEW TOP VIEW 1 5 6 3 VOL 4 2 PAIR POWER OK VOL 10 11 12 131415 16 REAR VIEW 17 18 1920 21 22 23 24 25 VGA DC IN AV IN IR HDMI 1 HDMI 2 USB POWER 26 1 LENS 14 RETURN 2 SPEAKER 15 PROJECTOR Button 3 Buttons 16 POWER 4 / PAIR Button 17 IR Sensor Button Button 5 FOCUS ADJ. Knob 18 VGA Port 6 TRAPEZOIDAL ADJ.
Install Power Adapter Follow below picture to connect power adapter Plug the included AC adapter body into the standard AC power outlet to power the unit. Connect small end to DC IN jack of main unit. After that, press the POWER switch to on position to turn the unit in standby model, the indicator is lighted red. To turn on the unit, press button once on unit panel or by the remote. The indicator is lighted green.
Main Button Operation - Press the button to turn on unit, press again to standby mode. / SOURCE - Press the button to select input source. / MENU - Press the button to enter projector menu. OK OK - Press the buttons to navigate and select screen item of menu. / EXIT - Press the button to return to previous status or exit the menu. - Press the buttons to fast search forward and rewind on USB. - Press the buttons to search next or previous file on USB.
Connect HDMI Show The Image On Projector Screen Refer to the following picture to connect a set top box, a BD/DVD player or a streaming player to the HDMI input. 1. Turn the unit to standby mode before connect HDMI cable. 2. After connection, press the button to turn on unit and indicator will light GREEN. 3. Press the PROJECTOR button to turn on the projector function. 4. Press the / SOURCE button, use the button to select HDMI and press OK button to enter.
Connect VGA Show The Image On Projector Screen Follow below picture to connect VGA cable and device. 1. Turn the unit to standby mode before connect VGA cable. 2. After connect, press the button to turn on unit and power indicator will light GREEN 3. Press the PROJECTOR button to turn on the projector function 4. Press the / SOURCE button, use the button to select VGA and press OK button to enter. The video of VGA device will show on projector screen 5. Press the button to turn the unit to standby mode.
Connect Audio Output ( Aux Out / Line Out / Earphone) Follow below picture to connect audio cable and device. 1. Press the button to turn the unit in standby mode before connection. 2. Use audio cable to connect follow below figure. 3. After connect and turn on both units. Your projector sound from external device now. 4.
Using USB Playback (Media Player) Install USB device: 1. Press PROJECTOR Button to turn off projector function before install USB. 2. Install the USB device into USB port. 3. After connect, press the PROJECTOR button to turn on unit 4. Press the / SOURCE button to enter, use buttons to select Media Player and press the OK button to enter. 5. After that, the Media Player menu will display, use buttons to select one of the icon of PHOTO / MUSIC / MOVIE / TEXT and press the OK button to enter. 6.
Using Bluetooth Playback External devices that have a built-in Bluetooth feature can connect wirelessly to the Unit. Getting Connected Pairing a Bluetooth device 1. Press the button to turn on unit, the power indicator light GREEN 2. Press the / SOURCE button, use the button to select Bluetooth and press button to enter Bluetooth mode and Bluetooth OK indicator will flash Blue. 3. The Bluetooth function of your external device to ON and begin searching for devices.
Using Projector Menu 1 /MENU button to enter projector menu Picture menu. Press Picture Mode Medium Color Temperature Aspect Ratio 16:9 Noise Reduction PC Setting Reduce Display Size 100% USE TO SELECT Picture Mode Medium USE Color Temperature Medium USE PRESS OK TO SELECT Noise Reduction Middle USE USE Picture Mode Customer define Contrast Brightness Color Sharpness Aspect Ratio 4:3 16:9 Use buttons to select different color temperature to Cool / Medium / Warm / User.
Using Projector Menu 2 Press MENU button to enter projector menu, press Sound Mode Standard Balance 0 USE This Sound menu showed on right upper of view screen. TO SELECT Sound Mode Standard USE PRESS OK TO SELECT Balance 0 buttons to select Sound menu. PRESS OK Use to select different sound effect Standard / Music / Movie / Sports / User. Use or to select Bass and Treble digit if chose User item. Follow below figure to set digit.
Specifications Bluetooth Version 5.0 Light Source Type LED Unit ANSI Lumens 45 Display Native Resolution 800 x 480 RGB HDMI Input Supported 1080p , 1080i , 720p, 576i , 480p, and 480i Video Resolution. Projection Size 37-150 inch Input Port HDMI / USB / AUX IN / MIC IN USB Port Supported Format Support USB device up to 32GB Support Picture format: JPG, GIF, BMP, PNG Support Audio format: MP3 Support Video format: Mpeg1, Mpeg2, Mpeg4, RM, AVI, RMVB, MOV, MJPEG DC IN Power DC 13V , 4.
To make a warranty claim, do not return this product to the store. Please email support@curtiscs.com or call 1-800-968-9853. 90 day Warranty This product is warranted to be free from defects in material and workmanship for a period of ninety (90) days from the date of original purchase. During this period, your exclusive remedy is repair or replacement of this product or component found to be defective, at our option; however, you are responsible for all costs associated with returning the product to us.