MODEL NO.
This equipment is a Class II or double insulated electrical appliance. It has been designed in such a way that it does not require a safety connection to electrical earth.
13. Unplug this apparatus during lightning storms or when unused for long periods of time. 14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. 15.
25. 19. 26. Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. 27. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Control Location (Top Views) Carry Handle LCD Display Mode Button Power Button Preset Up Button Volume Up Button Preset Down Button MODE Volume Down Button PRE+ Tunning Down & Reverse Button VOLUME+ VOLUME- PRE- PRESET /PAIR Tunning Up & Forward Button AUTO SCAN/ Play/Pause & Auto Scan Button Preset & Pair Button Control Location (RearView) AUX In Jack AUX IN AC ~ AC Socket 4
Power Connection Connecting AC Power Connect the small end of AC cord to the socket at the back of the main unit and insert the plug of AC cord into standard AC wall outlet. Caution: The unit is designed to operate from mains supply of AC 120V~60Hz. If the plug of AC cord does not fit properly, try to turn it over and try again. Do not force it. When the unit is intended for being unused for a long period of the time.
Caution: There is a danger of explosion if batteries are replaced incorrectly. Replace batteries with the same type and same brand only. When the unit is intended for being unused for a long period of the time, press the POWER button to turn OFF the unit and remove all batteries from the main . unit Main Operation Plug into AC Power or install batteries by the instructions on the previous section. Press the Power button to turn on the unit. The LCD Display will lit.
Bluetooth Operation 1. If the unit has never been paired with a Bluetooth device before, you need to follow the pairing instructions below to link the SRC1227BT with your Bluetooth device. • Press the POWER button to turn on the unit. • Press and toggle the MODE button to select Bluetooth mode. The unit will search the paired device with the “BLUETOOTH” Indicator lit. • Press and hold the PRESET/PAIR Button for 4~5 seconds.
Maunal Saving and Playing a Station as a Preset 1. Tune to the desired station 2. Press the Preset button. Preset number “P01” will appear on the displays 3. Press the Tuning Up & Down button to adjust to the desired preset number. “P01”-”P20” (20 preset memories) 4. Press the Preset button to save the current radio station to the selected preset which can store 20 stations. 5. Press the PRE+/PRE- button to cycle through preset radio stations.