MODEL NO.
IMPORTANT SAFETY INSTRUCTIONS This equipment is a Class II or double insulated electrical appliance. It has been designed in such a way that it does not require a safety connection to electrical earth. CLASS1 LASER PRODUCT This mark indicates this unit belongs to class 1 laser product.The laser beam may produce radiation harm to the directly touching human body.
IMPORTANT SAFETY INSTRUCTIONS 13. Unplug this apparatus during lightning storms or when unused for long periods of time. 14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. 15.
IMPORTANT SAFETY INSTRUCTIONS 19. 26. Do not install this equipment in a confined or building-in space such as a book case or similar unit, and remain a well ventilation conditions at open site. The ventilation should not be impeded by covering the ventilation openings with items such as newspaper, table-cloths, curtains etc. 27. WARNING:Please refer the information on exterior bottom enclosure for electrical and safety information before installing or operating the apparatus. 28.
Control Location (Top Views) TRACK DISPLAY (CD ONLY) HANDLE BLUETOOTH INDICATOR CD DOOR REPEAT BUTTON SKIP FORWARD BUTTON PROGRAM BUTTON POWER PAIR RPT PLAY/PAUSE BUTTON PLAY/PAUSE SKIP BACKWARD BUTTON STOP/BLUETOOTH PAIR BUTTON REPEAT INDICATOR STANDBY INDICATOR PROGRAM INDICATOR VOLUME KNOB TUNING KNOB FUNCTION SWITCH (CD/BLUETOOTH/FM/AM) POWER BUTTON AUX IN JACK AC SOCKET BATTERIES COMPARTMENT 4
Power Connection Connecting AC Power Connect the small end of AC cord to the socket at the back of the main unit and insert the plug of AC cord into standard AC wall outlet. Caution: The unit is designed to operate from mains supply of AC 120V~60Hz. If the plug of AC cord does not fit properly, try to turn it over and try again. Do not force it. When the unit is intended for being unused for a long period of the time.
Caution: There is a danger of explosion if batteries are replaced incorrectly. Replace batteries with the same type and same brand only. When the unit is intended for being unused for a long period of the time, press the POWER button to turn OFF the unit and remove all batteries from the main . unit Main Operation Switching On for the first time Plug into AC power or install batteries by following instructions on the previous Power Connection section. The STANDBY indicator willl lit.
CD Operation The unit is designed to play normal music CD disc bearing the correct identification logo. If the disc does not confirm tothe standard, it may not be played back properly. Caution: Playback of CD-R / CD-RW may depend on recording conditions. Do not attach a seal or label to either side (the recordable side or the labeled side) of a CD-R/ RW disc. It may cause malfunction. Do not load a blank CD-R/ RW disc. It will take over 1 minute to read the disc.
CD Operation-Continued Repeat playback modes (Repeat 1 / Repeat all) Repeat the Current Track During playback, press the REPEAT button once to repeat the current CD track. Repeat All Tracks During playback, press the REPEAT button twice to repeat the entire album. Return to normal playback Press the REPEAT button until NO repeat indicator is displayed. The normal playback will be resumed. Programmed CD playback This unit can be programmed to play up to 20 tracks in CD mode.
Bluetooth Operation 1. If the unit has never been paired with a Bluetooth device before, you need to follow the pairing instructions below to link the SRCD1368BT with your Bluetooth device. • Press the POWER button to turn on the unit. • Press and toggle the FUNCTION button to select Bluetooth mode. The unit will search the paired device with the “BLUETOOTH” Indicator lit. • Press and hold the STOP/PAIR Button for 4~5 seconds.
AUX IN Operation Setting up (AUX IN) connection AUX-IN jack will allow you to connect external music player or external sound source to the main unit. 1. Plug into a 3.5mm audio cable (not included) into your external music player and connect the other end (3.5mm jack) into the AUX IN jack on the top of the unit. 2. Make sure your external music player is turned on and start music playback on the music player 3. Adjust VOLUME knob to control the sound level of music playback from the speakers on the unit.