Users Manual Part 2

ManualsBrandsMertik Maxitrol ManualsElectronicsControl Unit For GV60/Symax System

15 / 29

ENGLISH

INSTALLATION AND OPERATING INSTRUCTIONS FOR OEM USE ONLY

DRAFT 21/11/2018

MODES OF OPERATION

1 2

OFF

Thermostatic Mode

The room temperature is measured and

compared to the set temperature. The

ame height is then automatically ad-

justed to achieve the set temperature.

1 2

OFF

Program Mode

PROGRAMS 1 and 2, each can be pro-

grammed to go ON and OFF at specic

times at a set temperature.

Eco Mode

Flame height modulates between high

and low. If the room temperature is low-

er than the set temperature, the ame

height stays on high for a longer period

of time. If the room temperature is high-

er than the set temperature, the ame

height stays on low for a longer period

of time. One cycle lasts approx. 20 min.

THERMOSTATIC MODE

1 2

OFF

ON:

Press

button. displayed, preset tem-

perature displayed briey, and then room

temperature displayed.

OFF:

1. Press

button.

2. Press

or button to enter Manual

Mode.

3. Press button

to enter Program Mode.

4. Press button to enter Eco Mode.

1 2

OFF

SETTING:

1. Press

button and hold until dis-

played, temperature ashes.

2. To adjust set temperature press

button.

3. To conrm press

button or wait.

PROGRAM MODE

1 2

OFF

ON:

Press

button. , or

, or

displayed.

1 2

OFF

OFF:

1. Press

or or button to enter

Manual Mode.

2. Press

button to enter Thermostatic

Mode.

NOTE: The set temperature for Thermostatic Mode is the tem-

perature for the ON time in Program Mode. Changing

the Thermostatic Mode set temperature also changes

the ON time temperature in Program Mode.

Default settings:

ON TIME (Thermostatic) TEMPERATURE: 70 °F / 21 °C

OFF TIME TEMPERATURE: “

” (pilot ame only)

1 2

OFF

TEMPERATURE SETTING:

1. Press

button and hold until

ashes.

and set temperature (set-

ting in Thermostatic Mode) displayed.

2. To continue press

button or wait.

, displayed, temperature ash-

es.

3. Select OFF temperature by pressing

the

or button.

4. To conrm press

button.

NOTE: The ON (Thermostatic) and OFF set temperatures are

the same for each day.

1 2

OFF

DAY SETTING:

ashes. Press or button to

choose between

, , , , , ,

, , .

6. To conrm press

button.

Summary of content (11 pages)

PAGE 1
DRAFT 21/11/2018 MODES OF OPERATION AM PM ON OFF 1 2 AM PM ON OFF Thermostatic Mode he room temperature is measured and T compared to the set temperature. The flame height is then automatically adjusted to achieve the set temperature. FOR OEM USE ONLY PROGRAM MODE AM PM AM AM PM ON OFF ON OFF OFF: 1. Press or or button to enter Manual Mode. 2. Press button to enter Thermostatic Mode.
PAGE 2
INSTALLATION AND OPERATING INSTRUCTIONS DRAFT 21/11/2018 AUXILIARY FEATURE (2ND BURNER FEATURE) selected AM PM ON OFF 1 2 FOR OEM USE ONLY ON TIME SETTING (PROGRAM 1): 7. , , displayed, is displayed shortly, and hour flashes. 8. To select hour press or button. 9. To confirm press button. , , displayed, displayed shortly, and minutes flash. 10. To select minutes press or button. 11. To confirm press button.
PAGE 3
DRAFT 21/11/2018 INSTALLATION AND OPERATING INSTRUCTIONS FOR OEM USE ONLY 10-SYMBOL OPERATION Child Proof Time Signal Indicator Thermostatic Mode Battery Status AM PM ENGLISH Fan Countdown Timer Fahrenheit or Celsius Program Mode Light ON OFF 1 2 Eco Mode Temperature Auxiliary Feature (2nd Burner Feature) Figure 22: 10-symbol Display SETTING FAHRENHEIT OR CELSIUS AM PM To change between °C and °F, press and buttons simultaneously. NOTE: C hoosing °F results in a 12 hour clock.
PAGE 4
INSTALLATION AND OPERATING INSTRUCTIONS DRAFT 21/11/2018 MANUAL MODE (HANDSET) NOTICE BEFORE OPERATING 1. Make sure MANUAL knob on the GV60 valve is in the ON, full counterclockwise position. 2. Place the ON / OFF switch (if equipped) in the I (ON) position. FOR OEM USE ONLY DESIGNATED LOW FIRE AND HIGH FIRE NOTE: B acklight must be on for high fire and low fire double-click operation. AM ▪ To go to low fire, double-click ton. is displayed.
PAGE 5
DRAFT 21/11/2018 MODES OF OPERATION AM PM ON OFF 1 2 AM PM ON OFF Thermostatic Mode he room temperature is measured and T compared to the set temperature. The flame height is then automatically adjusted to achieve the set temperature. FOR OEM USE ONLY PROGRAM MODE AM PM AM AM PM ON OFF ON OFF OFF: 1. Press or or button to enter Manual Mode. 2. Press button to enter Thermostatic Mode. 3. Press button to enter Eco Mode.
PAGE 6
INSTALLATION AND OPERATING INSTRUCTIONS DRAFT 21/11/2018 AUXILIARY FEATURE (2ND BURNER FEATURE) ON OFF 1 2 ON TIME SETTING (PROGRAM 1): 7. , , displayed, is displayed shortly, and hour flashes. 8. To select hour press or button. 9. To confirm press button. , , displayed, displayed shortly, and minutes flash. 10. To select minutes press or button. 11. To confirm press button.
PAGE 7
INSTALLATION AND OPERATING INSTRUCTIONS DRAFT 21/11/2018 FOR OEM USE ONLY LIGHT / DIMMER OPERATION AM ON: Press button ( on at preset level. OFF: Press displayed). Light is button ( disappears). ENGLISH SETTING: 1. Press button and hold until flashes. 2. To adjust light between 20…100 % press or button. 3. To confirm setting either press button or wait ( displayed). NOTE: The Light works independently of the pilot flame. If you want the light on but no flame, press button.
PAGE 8
DRAFT 21/11/2018 INSTALLATION AND OPERATING INSTRUCTIONS FOR OEM USE ONLY THE PUCK HANDSET The Puck is a smart control that works in conjunction with the GV60 / Symax system. Its basic functions include turning the fire on and off and turning the flame height up and down. The Puck is equipped with temperature sensing that allows the use of the popular myfire app.
PAGE 9
INSTALLATION AND OPERATING INSTRUCTIONS DRAFT 21/11/2018 FOR OEM USE ONLY MYFIRE WI-FI BOX (B6R-W2…) The new Wi-Fi Box has a faster processing speed, variable power supply between 5 and 24 volts, two RGB outlets, identical connectors on both ends of the cable, and the Wi-Fi Box itself has a much smaller footprint.
PAGE 10
INSTALLATION AND OPERATING INSTRUCTIONS DRAFT 21/11/2018 FOR OEM USE ONLY MYFIRE APP SETUP NOTICE For more detailed app setup / operating instructions refer to www.myfireapp.com INITIAL SETUP 1. Download myfire app from Apple App Store or Google Play Store. 2. Touch screen to start app setup. 3. Choose language, temperature (°C or °F) and time format (12 or 24 hour). REGISTRATION NOTE: Y ou must register before logging in. Registration is one time only. 1.
PAGE 11
Interrupter Block G60-ZUS… Ignition Cable G60-ZKIS… Pilot Burner G30-ZP2M-L Antenna Receiver B6R-R8(9)P… Combination Control GV60… RESET Button ENGLISH Mains Adapter (optional) G60-ZMA3 Wall Switch (optional) G6R-ZWSE(N)… DOWN ON-OFF UP Thermocurrent Cable TC G60-ZKIRS… Thermocurrent Cable SW with ON / OFF Switch G60-ZSKS(L)S… 8 Wire Cable G6R-C… DRAFT 21/11/2018 The receiver B6R-R8(9)PT… has main burner supervision (2nd thermocouple option).