Caution : You must read this before you proceed Chair Label Picture Description QTY A Seat 1 B Right Armrest (with Pre-Installed Levellers) 1 C Left Armrest (with Pre-Installed Levellers) 1 D Seat Cushion 1 E Back Cushion 1 Page 1 of 14
Label Picture Description QTY ① Bolt (M6*40MM) 5 ② Bolt (M6*32MM) 3 ③ Washer 7 ④ Allen Key 1 Before Beginnin g Assembly : X5 X3 X7 Overview Back Cushion(E) Right Armrest(B) Seat Cushion(D) Left Armrest(C) Seat(A) FRONT FACING This Chair has multiple parts and may require up to 30 minutes to assemble. To give you an overview of the Chair parts, the above picture is to help you put the various parts into perspective.
Step 1 1.2 1.1 Open the carton and place all the parts onto a clean, non-marring surface. Place the Right Armrest(B) facedown. 1.1) With the assistance of your adult partner, turn the Seat(A) over and align it to the Right Armrest(B). 1.2) Attach Seat(A) to Right Armrest(B) using Bolts(①) and Washers(③) with Allen Key(④) as shown above. Attach Seat(A) to Right Armrest(B) using Bolt(②) and Washer(③)with Allen Key(④) as shown above. Do not fully tighten the Bolts. Step 2 2.1 2.
Step 3 In a sequential manner, proceed to tighten all Bolts. DO NOT tighten any Bolt fully and then move on to the next one, this may cause the frame to warp. Then, with the assistance from an adult partner, stand the Chair upright. Adjust the Pre-installed Levellers until the Chair is level with the ground. To adjust the Levellers: with the assistance from an adult partner, tilt the Chair to rest on two feet. Adjust the levellers to the desired height to avoid wobbles.
Questions & Answers about Proposition 65 • What is Proposition 65? Proposition 65 requires businesses to provide warnings to Californians about significant exposures to chemicals that cause cancer, birth defects or other reproductive harm. These chemicals can be in the products that Californians purchase, in their homes or workplaces, or that are released into the environment.
Caution : You must read this before you proceed Loveseat Label Picture Description QTY F Seat 1 G Right Armrest (with Pre-Installed Levellers) 1 H Left Armrest (with Pre-Installed Levellers) 1 D Seat Cushion 2 E Back Cushion 2 Page 6 OF 14
Label Description QTY ① Bolt (M6*40MM) 5 ② Bolt (M6*32MM) 3 ③ Washer 7 ④ Allen Key 1 Before Beginnin g Assembly : Picture X5 Overview X3 X7 Back Cushion(E) Right Armrest(G) Seat(F) Left Armrest(H) Seat Cushion(D) FRONT FACING This Loveseat has multiple parts and may require up to 30 minutes to assemble. To give you an overview of the Loveseat parts, the above picture is to help you put the various parts into perspective.
Step 1 1.1 1.2 Open the carton and place all the parts onto a clean, non-marring surface. Place the Right Armrest(G) facedown. 1.1) With the assistance of your adult partner, turn the Seat(F) over and align it to the Right Armrest(G). 1.2) Attach Seat(F) to Right Armrest(G) using Bolts(①) and Washers(③) with Allen Key(④) as shown above. Attach Seat(F) to Right Armrest(G) using Bolt(②) and Washer(③)with Allen Key(④) as shown above. Do not fully tighten the Bolts. Step 2 2.1 2.
Step 3 In a sequential manner, proceed to tighten all Bolts. DO NOT tighten any Bolt fully and then move on to the next one, this may cause the frame to warp. Then, with the assistance from an adult partner, stand the Loveseat upright. Adjust the Pre-installed Levellers until the Loveseat is level with the ground. To adjust the Levellers: with the assistance from an adult partner, tilt the Loveseat to rest on two feet. Adjust the levellers to the desired height to avoid wobbles.
Questions & Answers about Proposition 65 • What is Proposition 65? Proposition 65 requires businesses to provide warnings to Californians about significant exposures to chemicals that cause cancer, birth defects or other reproductive harm. These chemicals can be in the products that Californians purchase, in their homes or workplaces, or that are released into the environment.
Caution : You must read this before you proceed Table Label Description QTY I Table Top Frame (with Suction Cups) 1 J Leg (with PreInstalled Levellers) 2 K Glass Top 1 Description Bolt (M6*20MM) QTY 5 ⑥ Bolt (M6*25MM) 5 ④ Allen Key 1 Label ⑤ Picture Picture Page 11 OF 14
Before Beginning Assembly: X5 X5 Overview Glass Top(K) Table Top Frame(I) Leg(J) FRONT FACING This Table has multiple parts and may require up to 30 minutes to assemble. To give you an overview of the Table parts, the above picture is to help you put the various parts into perspective. Please read through the instructions below to familiarise yourself with the parts and steps before assembly. Step 1 1.1 1.2 Open the carton and place all the parts onto a clean, non-marring surface. 1.
Step 2 2.2 2.1 2.1) Attach Table Top Frame(I) to Leg(J) using Bolts(⑤) with Allen Key(④) as shown above. 2.2) Attach Table Top Frame(I) to Leg(J) using Bolts(⑥) with Allen Key(④) as pictured. Do not fully tighten the Bolts. Step 3 In a sequential manner, proceed to tighten all Bolts. DO NOT tighten any Bolt fully and then move on to the next one, this may cause the frame to warp. Then, with the assistance from an adult partner, stand the Table upright.
Questions & Answers about Proposition 65 • What is Proposition 65? Proposition 65 requires businesses to provide warnings to Californians about significant exposures to chemicals that cause cancer, birth defects or other reproductive harm. These chemicals can be in the products that Californians purchase, in their homes or workplaces, or that are released into the environment.