Caution : You must read this before you proceed Table Label Description QTY I Table Top 1 J Long Side Panels with Leg 2 K Short Side Panel 2 Description QTY L Bolt(M6*25MM) 13 G Washer 13 Label Picture Picture Page 1 OF 5
H Allen Key 1 Before Beginning Assembly: Overview Table Top (I) Short Side Panel (K) Long Side Panel with Leg(J) Front Facing This Table has multiple parts and may require up to some 30 minutes to assemble. To give you an overview of the table parts, the above picture is to help you put the various parts into perspective. Please read through the instructions herebelow to familiarise yourself with the parts and steps before assembly.
Step 1 J I K Open the carton and place all the parts onto a clean, non-marring surface. Step 2 H L Place Table top (I) face down onto a clean, non-marring surface. Attach the Long Side Panel with Leg(J) to Table Top(I) using Bolts(L) and Wachers(G) with Allen Key(H) Repeat the same process to assemble the other Long Side Panel with Legs(J). Do not fully tighten the bolts. Occasionally some of the PE Wicker shifts and covers the mounting positions preventing easy assembly.
Step 3 L H Attach the Short Side Panel(K) between to the Long Side Panel with Legs(J), using Bolts(L) and Wachers(G) with Allen Key(H). Repeat the same process to assemble the other Short Side Panel(K). Do not fully tighten the bolts. Step 4 Place the Table on a LEVEL SURFACE to see if it wobbles. If it wobbles, lift the Table to some 30cm to 50cm height from the ground. Keep your feet and toes well away from the drop zone.
What is Proposition 65? Proposition 65 is a California law that requires warning labels on products that may contain one of more than 800-plus chemicals or ingredients that the California Office of Environmental Health Hazard Assessment (OEHHA) has deemed to cause cancer or other reproductive toxicity.
Caution : You must read this before you proceed Loveseat Label Picture Description QTY A Backrest 1 B Seat 1 C Right Armrest With Leg 1 D Left Armrest With Leg 1 E Seat Cushion 1 Page 1 OF 5
Label F G H Picture Description QTY Bolt(M6*35MM) Washer Allen Key 12 12 1 Before Beginning Assembly: Overview Backrest（A） Right Armrest With Leg（C） Seat Cushion（E） Left Armrest With Leg（D） Seat（B） This Loveseat has multiple parts and may require up to an hour minutes to assemble. To give you an overview of the Loveseat parts, the above picture is to help you put the various parts into perspective.
Step 1 H F G Open the carton and place all the parts onto a clean, non-marring surface. Place the Backrest(A) with its inside facing skywards. Attach Seat(B) to Backrest(A) using Bolts(F) and Washers(G) with Allen Key(H). Do not fully tighten the bolts. Occasionally some of the PE Wicker shifts and covers the mounting positions preventing easy assembly. The PE wicker should never be cut, but moved away from the mounting positions.
Step 3 C H H A B A B Place the Left Armrest With Leg(D) as pictured above. Attach Left Armrest With Leg(D) to the Backrest(A) and Seat(B) using Bolts(F) and Washers(G) with Allen Key(H). Do not fully tighten the bolts. Step 4 Turn the Loveseat right side up. Place the Loveseat on a LEVEL SURFACE. Inspect it and make sure all parts are adequately connected. Gently and gracefully, sit into to the Loveseat. This would help to align all the parts at all the joint areas.
What is Proposition 65? Proposition 65 is a California law that requires warning labels on products that may contain one of more than 800-plus chemicals or ingredients that the California Office of Environmental Health Hazard Assessment (OEHHA) has deemed to cause cancer or other reproductive toxicity.
