Assembly Instructions

ASSEMBLY INSTRUCTIONS

CHECK THAT YOU HAVE ALL THE

PIECES LISTED ON THE LEFT HAND

SIDE.

LAY A CLEAN SHEET ON A FLAT

SURFACE BIG ENOUGH TO ASSEMBLE

YOUR FURNITURE ON IN ORDER TO

PROTECT YOUR FURNITURE.

A 1

C 1

D 11

E 11

Attach side (C) to the sofa base (B). Do this by laying side (C) on the ground

with the bolt brackets facing you. Then align the bolt brackets of the sofa

base (C) with those in the sofa side (C) as shown in the diagram above. Insert

bolt (D) through the bracket of the sofa base (B) and through the bolt bracket

of the sofa side (C). Then secure with a washer (F) and a nut (E). Loosely

tighten the nuts and bolts with the spanner (G) and allen key (H).

Next, attach the sofa back (A) to the sofa base and sofa side (B+C). Lay the

sofa back (A) down so that the bolt brackets are facing you. Then place (B+C)

in position, as shown in the above image, so that the bolt brackets are all

aligned. Insert bolt (D) through the brackets of the sofa base (B) and through

the bolt brackets of the sofa side (C). Then secure with a washer (F) and a nut

(E). Loosely tighten the nuts and bolts with the spanner (G) and allen key (H).

Once all of the nuts and bolts are in place, fully tighten all of the nuts and bolts

used in the assembly using the spanner (G) and allen key (H).

BEFORE YOU START ASSEMBLING YOUR

FURNITURE:

SIDE SOFA

SOFA ASSEMBLY INSTRUCTIONS

PAGE 1
SIDE SOFA ASSEMBLY INSTRUCTIONS BEFORE YOU START ASSEMBLING YOUR FURNITURE: CHECK THAT YOU HAVE ALL THE PIECES LISTED ON THE LEFT HAND SIDE. LAY A CLEAN SHEET ON A FLAT SURFACE BIG ENOUGH TO ASSEMBLE YOUR FURNITURE ON IN ORDER TO PROTECT YOUR FURNITURE. A 1 1. B 1 C 1 Attach side (C) to the sofa base (B). Do this by laying side (C) on the ground with the bolt brackets facing you. Then align the bolt brackets of the sofa base (C) with those in the sofa side (C) as shown in the diagram above.
PAGE 2
TABLE ASSEMBLY INSTRUCTIONS CHECK THAT YOU HAVE ALL THE PIECES LISTED ON THE LEFT HAND SIDE. LAY A CLEAN SHEET ON A FLAT SURFACE BIG ENOUGH TO ASSEMBLE YOUR FURNITURE ON IN ORDER TO PROTECT YOUR FURNITURE. A 2 1. B 1 C 1 D 8 E 8 F 1 Lay the table top (B) down with the top facing down. Then attach chair legs (A) to the base of the table top (B). Align the screw holes of both (A and B) and insert screws (D) through a washer (E) then through both the holes.