Feel Design User guide MEDIADISK TWX Series
USER GUIDE 1. PRODUCT FEATURES 1 2. PLAYER VIEW 3 3. REMOTE CONTROL 4 4. INSTALLATION CABLE CONNECTION 5 5. NETWORK DATA SHARING WITH PC 8 6. SETUP MENU SHARING 13 7. MOVIE PLAY 16 8. MUSIC PLAY 17 9. PHOTO PLAY 17 10. FIRMWARE UPGRADE 18 11.
1. PRODUCT FEATURES Mediadisk TWX Series is a Home Media Center, with a built-in 3.5“ HDD, can play media files (movies, audios and photos) through TV and when connected to PC, can also play shared files via network. SAFETY AND OTHER INSTRUCTIONS Please use TWX carefully and read following instructions. >>> Copyright Software, audio, video or any intellectual properties are protected by copyright and international laws. It is user’s responsibility when reproducing or distributing content(s).
General Connections Supported Codec PRODUCT SPECIFICATIONS Video Codec MPEG1/2/4,DivX,XviD,WMV9(max 1920*1080) Format WMV, AVI, MPG,DAT,,VOB,IFO,ISO,TP,TRP,TS Audio MP3, WMA, AAC, WAV, AC3, DTS down mixing / Pass through Photo JPEG, BMP, PNG, GIF Video output Composite / S-Video HDMI: 480p (576p),720p,1080i ,1080p Component: 480i (576i), 480p (576p), 720p, 1080i Audio output Analog (Stereo), Coaxial, Optical (5.1ch) Network 10/100 Mbps, WIFI 802.11 b/g USB Interface USB2.
PLAYER VIEW 2 3 4 5 8 7 1 6 17 13 16 1. LCD Condition Display Window Status window 2. Wireless Connection LED Working status 3. LAN Connection LED Working status 4. HDD Operation LED Working status 5. USB Connection LED USB device status 6. Remote Control Signal Receiver Infra red receiver 7. Power LED Working status 8. Power Button Power On/Off 9. Setup Button Setup menu 10. Stop Button 11. Play Button 12. OK Button Select or play file 12 11 19 10 15 20 21 9 22 14 18 13.
REMOTE CONTROL 1- Power Button 2- Local Disk Mode 3- Mute 4- Play / Pause 5- OK 6- Volume 7- Home Screen Shortcut Go to Screen Menu 8- Search Forward or backward search (Each double click speeds up search up to 32 times). 9- Subtitle Adjust subtitle settings - Change position with arrows - Change subtitle color with arrows - Select multiple subtitles (When a subtitle file contains more than two languages for ex.) 10- Audio Select audio source.
INSTALLATION CABLE CONNECTION Connection with ordinary (Composite) TV output Connect TWX and TV using yellow video cable. Select appropriate video input mode on TV and output on TWX through remote control. 2 Connection with S-Video output Connect TWX and TV using S-Video cable. Select appropriate video input mode on TV and output on TWX through remote control.
4 Connection with Component output Connect TWX and TV with component cable. Select appropriate video input mode on TV and output on TWX through remote control. 5 Connection with 2 CH of Normal TV Connect left (white) and right (red) sound output to appropriate terminal of your TV or Hi-fi 6 Connection with Coaxial output Connect to multi channel decoder / amplifier with coaxial input to enjoy 5.1 CH quality sound.
7 Connection with Optical output Connect to multi channel decoder / amplifier with optical input to enjoy 5.1 quality sound. 8 Connection with computer Connect TWX with computer to transfer datas through USB cable.
2. NETWORK BASED DATA SHARING WITH PC LAN Cable connection between TWX and PC 2.1 Connection to PC Use cross or direct cable. 2.2 HUB Connection For hub or internet router connection, use direct cable. Note: To be connected to TWX, computer should be equipped with a 10/100Mbps LAN card. Whether cross or direct LAN cable can be used for this connection. Network-based Data Sharing with PC After LAN cable is connected, according to your system environment, set up windows network as follows.
2.3 Data sharing Setup for Windows XP 1. Select folder you want to share and select “Sharing and security” with right mouse button. 2. Check “Sharing this folder on the network” and type “Share Name”. Ex: My Movie WARNING! “Share Name” should be less than 12 characters. 3. If folder is shared, you will see a hand mark on folder icon. Ex: My Movie 4. Go to “Control Panel –Administrative Tools –Computer Management –Local Users and Group” and among displayed items, double–click “Guest” item.
WARNING! • Permission setting is only required for Windows XP Pro users. If you are an XP home user, go directly to step “6”. • If you cannot see “Administrative Tools”, click on “Switch to Classic view” on left corner. 5. After checking “User cannot change password” and “Password never expires”, keep the other checkboxes unchecked. 6. Go to “Control Panel—Network Connections”. Select “Local Area Connections”. Select “Properties” using right mouse button.
7. Among displayed items, double-click “Internet Protocol (TCP/IP)”. After checking “Specify an IP address” enter your IP address and subnet mask. Ex: IP address: 192.168.1.3 Subnet Mask: 255.255.255.0. WARNING! If your PC already has “Obtain IP address automatically” checked and IP automatically assigned from an Internet router or DHCP server, you may not need this setup.
After selecting off, click on “ok”. 8. Configure TWX network environment. After pressing “Setup”, select “IP SETUP” among “NETWORK” setup items and set this to manual setup. Then enter your IP address and subnet mask. Ex) IP address:192.168.1.10 / Subnet Mask: 255.255.255.0. Main Menu Screen Icons and Screen Components 1. Hard Disk Selection Use this icon for searching Hard Drive. 2.
Setup Menu Setting Figure below is TWX SETUP screen For each menu item, possible options are described below. 1. SYSTEM TV OUT C/S-Video: Signal through composite and S-Video output terminal Component: Signal through component output terminal with 4 Available Resolutions: 480i (576i), 480p (576p), 720p and 1080i HDMI: Signal through HDMI output terminal with 4 Available Resolutions: 480p (576p), 720p, 1080i, 1080p TV Type 4:3 Letterbox Aspect ratio displays contents based on its horizontal length.
2. PROGRAM Language selection French, English, German, Portuguese, Spanish, Italian. Subtitle Size Selection Small, Big or None. Subtitle Color White/Black, Yellow/Black, Green/Black, White/Blue, Yellow/Blue and Green/Blue Slide Show Interval Set slideshow duration Initialize (Default Setting) Reset all settings to default values. 3.
1. Enter setup interface 2. “Wireless network setup”: “Network option” enter “Wireless setup interface”, choose available wlan. 3. Encryption No web encryption: Enter "not use" encryption Hex characters encryption: Enter "use", delete characters with "Stop" button, change from numbers to letters with “playlist” button and revise figures by saving encryption. When IP setup mode shows "Auto": IP address will be automatically searched When IP setup mode shows “Manual”: enter required IP address 5.
Movie Play TWX can play following files: AVI, MPG, MPEG, DAT, VOB, TP, TRP, WMV, ISO etc… Buttons and functions for movie playback Remote Control Button Function Description SUBTITLE 1-Click Change subtitle size (using UP and DOWN arrow). 2-Click Change subtitle color (using UP and DOWN arrow). 3-Click Select multiple subtitles (When subtitle file contains more than two languages, click 3 times and select subtitle language using UP and DOWN arrow).
Music Play During music files play, system is in music playback mode. You can search folder and files. Buttons and functions for music playback Remote Control Button Function Description BOOKMARK Continuous Play Support two types: stopped points and bookmarked points(up to 9 in order) VOL Volume Adjust Adjust volume MUTE Sound mute Cut off sound OK Play Play selected file PLAY Start/Pause Start or pause playback STOP SKIP ARROW BUTTONS Stop Stop current playback Prev.
Firmware Upgrade TWX firmware will be upgraded for various performances to update and fix bugs to satisfy customer’s needs, firmware version can be confirmed on right upper corner of SETUP screen. 1. Latest firmware can be downloaded from www.memup.com 2. After TWX connected to PC, copy firmware to desired location of TWX 3. Connect TWX to TV. 4. Select firmware file by using remote control and press [OK].
Trouble Shooting For detailed troubleshooting information, please visit www.memup.com and consult FAQ 1. When power is on, nothing appears or screen is shaking: Video output mode is not properly set, press [TV OUT] on remote control to change output mode until it is properly set. TWX is in PAL or NTSC mode, please check your TV Output mode 2. While playing movie file, subtitle is not shown. Make sure movie file name matches to subtitle file name. In case of multiple subtitles, if there is no first subtitle.
