Feel Design User Guide
Important Safety Instruction 1. Read and follow Instructions: All the safety and operating instructions should be read before the product is operated. 2. Cleaning: Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning. 3. Attachments: Use only attachments recommended by Memup. 4. Water and Moisture: Do not use this product near water. 5.
12. Wall or Ceiling Mounting: The product should be mounted to a wall or ceiling only as recommended by the manufacturer. 13. Heat: The product should be situated away from heat sources such as radiators, heat registers, stoves, or other products (including amplifiers) that produce heat. Table of Contents PACKAGE CONTENTS ................................... 3 FEATURES....................................................... 3 GETTING STARTED........................................ 4 Controls at a Glance ....
Package Contents Please make sure that the items shown below are included in the package. Should an item be missing, please contact the local retailer from which you purchased this product. 1. KLIP 2. Stereo Earphones 3. USB Adapter 4. Quick starter Guide Features • Integrated flash memory • Plays MP3 and WMA digital music files • Random (shuffle) music playback • Hold feature prevents accidental key presses • Mobile data storage function • USB 2.
Getting Started Controls at a Glance 1. Play/Pause: OK Press Joystick, Power On/Off: Press and Hold Joystick 2. Volume Up + 3. Previous/Reverse < 4. Next/Forward > 5. Volume Down - 6. LED Status Indicator 7. Headphone Output Jack 8. USB Port 9. Random Switch 10. Hold Switch Powering KLIP has an integrated rechargeable battery. Typical music playtime is up to 4 hours. Upon initial use, the battery should be charged fully (4 hours) to ensure optimal performance and battery life.
Charging KLIP can be charged through a PC USB connection. Plug one end of the USB cable into the player’s USB Port and plug the other end into the USB port of a powered-on computer. If the player is connected to a computer through a USB hub, the hub must be self-powered to charge the player’s battery. File transfers will extend the charging time. The battery used in this device may present a fire or chemical burn if mistreated. Do not disassemble, incinerate, or heat the battery.
Key Action Function Hold > Fast-forward through the current track. Press - Decrease the volume level. Press + Increase the volume level. For more information about how to get music onto KLIP, please refer to the section “Connecting to a Computer > Transferring Files”. Random Playback (Shuffle) KLIP can play all music files in Normal (repeat) or Random order. • To play tracks in normal (repeat) order, set the RANDOM switch to the Repeat position.
Disconnecting from a Computer Disconnect KLIP as instructed below to prevent data loss or file/firmware corruption. Microsoft Windows 1. Double-click the green arrow in the taskbar located on the lower-right side of the computer screen (Safely Remove Hardware). 2. Safely Remove Hardware: Select “USB Mass Storage Device” from the list that appears and then click on “Stop”. Stop a Hardware Device: Select “USB Mass Storage Device” from the list that appears and then click on “OK”. 3.
The sound quality of the music is poor. Try playing the file on your computer. If the sound quality is still poor, try downloading the file again or re-encoding the file yourself. Ensure that the bit rate of the file is not too low. The higher the bit rate of the file, the better it will sound. The minimum recommended bitrate is 128kbps for MP3s and 96kbps for WMAs. Try lowering the volume of the player. Ensure that the headphones are attached securely to the player. The player will not play my music file.
