Job # MMP9008 manual cover Colors: 1-color print Pantone 533c 4.75” (120.6mm) wide FO LD 4.75” (120.6mm) high 8GB www.memorexelectronics.com Imation Electronic Products, A Division of Imation Enterprises Corp. Weston, FL Printed in China / Impreso en China MMP9008 Please read these instructions completely, before operating this product. Memorex, el logotipo de Memorex y la frase "Is it live or is it Memorex?" FO LD Por favor lea toda las instruciones antes de tratar de usar este producto.
TABLE OF CONTENTS Precautions.....................................................2 FCC Declaration.............................................3 EIA Guidelines................................................4 Location of Controls .......................................6 Charging the Battery ......................................7 Using the Strap...............................................8 Installing the Software .................................8 • Installing Windows Media Player 10..........
PRECAUTIONS COPYRIGHT: • Distributing copies of MP3, WMA, WMA with DRM tracks and/or WMV files without permission is a violation of international copyright laws. • This Product is protected by certain intellectual property rights of Microsoft. Use or distribution of such technology outside of this product is prohibited without a license from Microsoft. SAFETY: • Vibration experienced during walking or exercising will not affect the player.
FCC DECLARATION This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: 1) This device may not cause harmful interference, and 2) This device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Dear Customer: Selecting fine audio and video equipment such as the unit you’ve just purchased is only the start of your musical enjoyment. Now it’s time to consider how you can maximize the fun and excitement your equipment offers. This manufacturer and the Electronic Industries Association’s Consumer Electronics Group want you to get the most out of your equipment by playing it at a safe level.
Decibel Level 30 40 50 60 70 80 Example Quiet library, soft whispers Living room, refrigerator, bedroom away from traffic Light traffic, normal conversation, quiet office Air conditioner at 20 feet, sewing machine Vacuum cleaner, hair dryer, noisy restaurant Average city traffic, garbage disposals, alarm clock at two feet THE FOLLOWING NOISES CAN BE DANGEROUS UNDER CONSTANT EXPOSURE: 90 100 120 140 180 Subway, motorcycle, truck traffic, lawn mower Garbage truck, chain saw, pneumatic drill Rock band conce
LOCATION OF CONTROLS 1. 2. 3. 4. 5. 6. 7. 1 6 2 7 8 3 9 4 5 10 8. A-B/• Button Navigation ▲/Volume Up Button Menu Button Display Navigation ▼/Volume Down Button Power/Lock Switch Navigation Right/Skip–Search n Button Micro USB Slot (USB CABLE PART 9. Enter/Play/Pause ®p Button 10. Headphones Jack 11 12 13 14 15 (HEADPHONES PART NO. TR11-C12171-B00*) 11. Navigation Left/Skip–Search o Button 12. Reset Hole (Rear of Unit) 13. Mic (Rear of Unit) 14. Strap Holes (Side of Unit) 15.
CHARGING THE BATTERY This unit has a built-in Lithium Polymer rechargeable battery. When the bars in the battery indicator (in the display) become low (see Figure 1) and before using the unit for the first time, recharge the battery as follows. 1. Connect the USB cable to the USB jack on this unit (as shown) and to the USB port on your computer; “USB CONNECTED” and “CHARGING” will appear on the screen. Once the battery is fully charged, “Fully Charged” will appear.
1 USING THE STRAP 2 Insert the rope through the hole in Insert the end of the Strap through the main unit. the rope’s loop until snug. INSTALLING THE SOFTWARE Software Installation CD (PART NO. TR00-406982-010*) General Information This unit is compatible with Microsoft Windows XP (Home or Professional Edition with Service Pack 2 or higher) or Vista. The MediaCoder is compatible with Microsoft Windows XP and Vista.
WINDOWS MEDIA PLAYER 10 INSTALLATION Windows Media Player 10 is for use with Windows XP only. See page 12 for how to install Windows Media Player 11. (Windows Vista users must use Windows Media Player 11.) Once you have installed Windows Media Player 10, you can transfer MP3 files, WMA files, WMA files with DRM 10 to your player using the “Sync” function. 1. Insert the installation CD-Rom into the CD Drive, then the installation screen will appear.
WINDOWS MEDIA PLAYER 10 INSTALLATION 4. Installation will continue. 5. At the Welcome screen, click NEXT. 6. Select the desired privacy options.
WINDOWS MEDIA PLAYER 10 INSTALLATION 7. Click on Privacy Statement to view the Statement, if desired. When finished, click “Next”. 8. Read the instructions and tick the check boxes as desired. Then click on the More Options tab and tick the check boxes as desired. 9. Click “Finish” to finish the installation of Windows Media Player 10.
WINDOWS MEDIA PLAYER 11 INSTALLATION Once you have installed Windows Media Player 11, you can transfer MP3 files, WMA files, WMA files with DRM 10 and photos to your player using the “Sync” function. 1. Insert the installation CD-Rom into the CD Drive; the installation screen will appear. If the installation screen doesn't automatically appear, double-click My Computer then doubleclick on the CD drive; the installation screen will appear. Click “Download & Install Windows Media Player 10 or 11”. 2.
WINDOWS MEDIA PLAYER 11 INSTALLATION 4. Read the License Agreement, then click “I Accept”. 5. Installation will continue. 6. At the Welcome screen, it is recommended to select “Express Settings” and then click on “Finish”. The newly-installed Windows Media Player 11 will open. You may also see a popup window asking, “A Windows Media Player update is available. Do you want to update now?” Follow the on-screen prompts if you choose to update at this time.
INSTALLING MEDIACODER Procedure to Install MediaCoder 1. Insert the installation CD-Rom into the CD Drive; the installation screen will appear. If the installation screen doesn't automatically appear, double-click My Computer then double-click on the CD drive, then the installation screen will appear. After selecting “Install PC Software”, click “Download & Install MediaCoder for Windows”. 2. The “Welcome” screen will appear. Click “Next”. 3. The “License Agreement” screen will appear. Select “I agree”.
INSTALLING MEDIACODER 4. The “Installation Folder” screen will appear. It is recommended to keep the folder as is. Then click “Install”; the program will then install. 5. After the program is done installing, the “Completing Setup Wizard” screen will appear. Click “Finish” to end installation. See page 19 for how to use MediaCoder.
DOWNLOADING AND TRANSFERRING FILES TRANSFERRING FILES You can download digital music files from the Internet or use encoding software to convert music that you have on an audio CD into MP3 or WMA format. Once these files are stored on your computer, you can easily copy them to your player. If you have already installed WMP (Windows Media Player) 10 or 11, you can transfer music files (MP3, WMA and/or WMA files with DRM 10) and photos and videos to the player through the "Sync" function of WMP 10 or 11.
DOWNLOADING AND TRANSFERRING FILES (CONT.) CONVERTING AN AUDIO CD INTO MP3 OR WMA FORMAT For Windows XP, you can also utilize the previously installed Windows Media Player 10 or 11 software to convert music on an audio CD into MP3 or WMA format as follows: 1. Open the Windows Media Player 10 or 11 Browser, then click on the “Rip” icon on the top tool bar. Insert a Music CD into the CD-Rom drive of your computer. 2.
DOWNLOADING AND TRANSFERRING FILES (CONT.) TRANSFERRING MP3/WMA/VIDEO/PHOTO FILES AND WMA FILES WITH DRM 10 USING WINDOWS MEDIA PLAYER 10 (FOR WINDOWS XP ONLY) To transfer MP3/WMA/PHOTO/VIDEO/WMA files with DRM 10 to the player, follow the procedure described below using the previously installed WMP (Windows Media Player) 10. Before beginning the procedure, please connect the unit to the computer as previously described. 1. Open the “Windows Media Player Browser 10” and click on “Sync”. 2.
USING MEDIACODER You can use the previously installed MediaCoder to convert MPG, MPG4, ASF, AVI and WMV files to AVI files supported by the player. 1. Open the previously installed MediaCoder program. 2. Click the “Add file” icon to add files for conversion. In the “Add file” window select the source file you want to convert and click the “Open” button. Repeat this procedure if you want to add other files for conversion. 3. Set up the Destination Path for the converted files.
SAFELY REMOVE HARDWARE SAFELY REMOVING YOUR PLAYER FROM THE COMPUTER NOTE: To avoid damage to your player or data loss, always follow the procedure listed below before disconnecting your player from the USB port on your computer. Using your mouse, double click the "Safely Remove Hardware" icon on the task bar. From the "Safely Remove Hardware" window (shown lower right), select "USB Mass Storage Device" and click the "Stop" button. The "Stop a Hardware Device" window will popup. Click "OK".
GENERAL OPERATION MENU BUTTON TURNING THE POWER ON/OFF 1 1 To turn the unit on, slide the Power/Lock switch to the left and then release; the unit will enter Music mode and be paused. To turn the unit off, Slide and hold the Power/Lock switch to the left. Do not release the Power/Lock switch until the unit turns off. At any time, press the Menu button to go back to the previous screen/Main menu.
GENERAL OPERATION (CONTINUED) HEADPHONES JACK 1 VOLUME BUTTONS 1 1 2 Plug the headphones (included) into the Headphones jack on the side of the unit. LOCK FUNCTION 1 To control the volume, simply press the . Navigation/Volume Up ▲ 1 or Down ▼ 2 button during playback. NOTE: The volume level will be shown on the screen by a bar and a number (0 to 40). Slide the Power/Lock switch to the Lock (right) position to lock the buttons; the Lock icon will appear in the top right corner of the screen.
MAIN MENU MAIN MENU: Press the Menu button repeatedly until the Main menu appears to access the Main menu. Select the desired function to play/set. Ebook - see page 44. FM Tuner - see page 40. Video - see page 33. Browse - see page 49. Photos - see page 35. Settings - see page 50. Recording - see page 45. Extras - see page 61. Music - see page 24.
OPERATION–MUSIC PLAYBACK MODE TO LISTEN TO MP3s/WMAs This unit supports the following audio formats: MP3, MPEG 1/2/2.5 Layer 3 with a bit rate of 32320 kbps and WMA files or WMA with DRM 10 with a bit rate of 48-192 kbps. 1 1 2 4 3 5 2 6 1 2 With the unit on, press the Menu button 1 repeatedly until the main menu appears.
OPERATION–MUSIC PLAYBACK MODE (CONTINUED) 3 1 3 2 To browse through your music, see more details below: Play All: Select to play all of the audio files. Artist: All artists will be shown in the display. Select Play All or the desired Artist using the Navigation/Volume Up ▲ 1 or Down ▼ 2 button then press the Enter/Play/Pause ®p button 3.
OPERATION–MUSIC PLAYBACK MODE (CONTINUED) NOTES: • See pages 16-18 for information on uploading MP3/WMA files to this unit. • While you are browsing your music, you can press the Menu button to return to the previous menu. • You can pause playback during Music Playback by pressing the Enter/Play/Pause ®p button; the Pause icon will appear on screen and the song will remain paused until the button is pressed again. • Set the Play mode to Normal, Repeat One, Repeat All or Random as shown on page 30.
OPERATION–MUSIC PLAYBACK MODE (CONTINUED) FORWARD/REVERSE SKIP 1 2 During playback, press the Navigation Left/Skip–Search o button to move the player back to the beginning of the currently playing file. Press the Navigation Left/Skip–Search o button repeatedly to move the player back to lower-numbered files. During playback, press the Navigation Right/Skip–Search n button to advance the player to the beginning of the next file.
OPERATION–MUSIC PLAYBACK MODE (CONTINUED) MUSIC CONTEXTUAL MENU–FAVORITES 2 1 1 2 While in Music Playback mode (Now Playing screen), while the desired song to add is playing, press and hold the Menu button until the Contextual menu appears. Scroll to the “TOGGLE FAVOURITES” option using the Navigation/Volume Up ▲ 1 or Down ▼ 2 button. 3 Press the Enter/Play/Pause ®p button to add the song to your favorites. See page 24 to play your favorite songs.
OPERATION–MUSIC PLAYBACK MODE (CONTINUED) MUSIC CONTEXTUAL MENU–EQUALIZER 2 1 1 2 While in Music Playback mode (Now Playing screen), press and hold the Menu button until the Contextual menu appears. 3 1 2 3 Scroll to the “EQ” option using the Navigation/ Volume Up ▲ 1 or Down ▼ 2 button, then press the Enter/Play/Pause ®p button 3. 3 Select a desired “Equalizer” setting (Normal, Classical, Jazz, Pop or Rock) using the Volume Up ▲ 1 or Down ▼ 2 button, then press the Enter/Play/Pause ®p button 3.
OPERATION–MUSIC PLAYBACK MODE (CONTINUED) MUSIC CONTEXTUAL MENU–PLAY MODE 2 1 1 2 While in Music Playback mode (Now Playing screen), press and hold the Menu button until the Contextual menu appears. 3 3 Scroll to the “PLAY MODE” option using the Navigation/Volume Up ▲ 1 or Down ▼ 2 button, then press the Enter/Play/Pause ®p button 3.
OPERATION–MUSIC PLAYBACK MODE (CONTINUED) MUSIC CONTEXTUAL MENU–RATE TRACK 2 1 1 2 While in Music Playback mode (Now Playing screen), press and hold the Menu button until the Contextual menu appears. 3 2 3 1 3 Scroll to the “RATE TRACK” option using the Navigation/Volume Up ▲ 1 or Down ▼ 2 button, then press the Enter/Play/ Pause ®p button 3. 4 Scroll to the “RATE THIS TRACK” option using the Navigation/Volume Up ▲ 1 or Down ▼ 2 button, then press the Enter/Play/Pause ®p button 3.
OPERATION–MUSIC PLAYBACK MODE (CONTINUED) MUSIC CONTEXTUAL MENU–BUY NOW 2 1 1 2 While in Music Playback mode (Now Playing screen), press and hold the Menu button until the Contextual menu appears. 3 1 3 Scroll to the “RATE TRACK” option using the Navigation/Volume Up ▲ 1 or Down ▼ 2 button, then press the Enter/Play/ Pause ®p button 3. 3 2 Scroll to the “BUY NOW” option using the Navigation/Volume Up ▲ 1 or Down ▼ 2 button, then press the Enter/Play/Pause ®p button 3.
OPERATION–VIDEO PLAYBACK MODE TO WATCH VIDEOS This unit supports the following video formats: AVI-MPEG4 Simple Profile (320x240 resolution 2024 fps, 385kbps); WMV - VC-1 Simple Profile (220x176 resolution, 30fps, 385kbps max) 1 1 2 4 3 5 2 6 1 2 With the unit on, press the Menu button 1 repeatedly until the main menu appears.
OPERATION–VIDEO PLAYBACK MODE (CONTINUED) HIGH-SPEED VIDEO SEARCH 1 During playback, press and hold the Navigation Right/Skip–Search n 1 or Left/o 2 button to move the player forward or backward within a video to locate a specific scene. The player will move forward or backward at high speed as long as the button is held. When you release the button, normal playback will resume.
OPERATION–PHOTO PLAYBACK MODE TO VIEW PHOTOS–This unit supports baseline JPEGs. 1 1 2 4 3 5 6 With the unit on, press the Menu button 1 repeatedly until the main menu appears. Select Photos using the Navigation ▲/ Volume Up 2, Navigation ▼/Volume Down 3, Navigation Right/ Skip–Search n 4 and/or Navigation Left/Skip–Search o 5 buttons, followed by the Enter/Play/Pause ®p button 6.
OPERATION–PHOTO PLAYBACK MODE (CONTINUED) PHOTO CONTEXTUAL MENU–PAN AND ZOOM 2 1 1 3 2 While in Photo Playback mode, press and hold the Menu button until the Contextual menu appears. 3 Scroll to the “PAN AND ZOOM” option using the Navigation/Volume Up ▲ 1 or Down ▼ 2 button then press the Enter/Play/Pause ®p button 3. 4 1 4 2 Zoom in using the Navigation Right/ Skip–Search n button 1, and zoom out using the Navigation Left/Skip–Search o button 2.
OPERATION–PHOTO PLAYBACK MODE (CONTINUED) PHOTO CONTEXTUAL MENU–SLIDE SHOW 2 1 1 2 During playback of the selected photos, press and hold the Menu button until the Contextual menu appears. 3 Scroll to the “SLIDE SHOW” option using the Navigation/Volume Up ▲ 1 or Down ▼ 2 button then press the Enter/Play/Pause ®p button 3 to activate the slide show.
OPERATION–PHOTO PLAYBACK MODE (CONTINUED) THUMBNAIL VIEW 1 2 3 2 1 2 1 3 During playback of the selected photos, press and hold the Menu button 1 until the Contextual menu appears. Scroll to the “THUMBNAIL” option using the Navigation/ Volume Up ▲ 2 or Down ▼ 3 button. Press the Enter/Play/Pause ®p button 1; a thumbnail view of the selected photos will appear in the display. Select the desired photo using the Navigation Right/ Skip–Search n 2/Left /Skip–Search o 3 button.
OPERATION–PHOTO PLAYBACK MODE (CONTINUED) PHOTO CONTEXTUAL MENU–FULL SCREEN ON/OFF 2 1 1 2 During playback of the selected photos, press and hold the Menu button until the Contextual menu appears. 3 Scroll to the “FULL SCREEN ON/OFF” option using the Navigation/Volume Up ▲ 1 or Down ▼ 2 button then press the Enter/Play/Pause ®p button 3 to view the photo at full screen (it will enlarge the photo and remove the top and bottom bars/info. Select again to turn this feature off.
OPERATION–FM RADIO MODE TO LISTEN TO THE FM RADIO 1 1 2 4 3 5 6 With the unit on, press the Menu button 1 repeatedly until the main menu appears. Select FM Tuner using the Navigation ▲/ Volume Up 2, Navigation ▼/Volume Down 3, Navigation Right/ Skip–Search n 4 and/or Navigation Left/Skip–Search o 5 buttons, followed by the Enter/Play/Pause ®p button 6.
OPERATION–FM RADIO MODE (CONTINUED) TO ADD PRESETS (UP TO 30) 1 2 3 1 4 While in FM Tuner mode, press and hold the Menu button 1 until the Contextual menu appears. Scroll to the “PRESET ACTIONS” option using the Navigation/ Volume Up ▲ 2 or Down ▼ 3 button then press the Enter/Play/Pause ®p button 4. Scroll to the “ADD PRESET” option using the Navigation/ Volume Up ▲ 2 or Down ▼ 3 button.
OPERATION–FM RADIO MODE (CONTINUED) TO DELETE A PRESET 1 1 2 3 2 While in FM Tuner mode, press and hold the Menu button until the Contextual menu appears. Scroll to the “DELETE” option using the Navigation/Volume Up ▲ 1 or Down ▼ 2 button then press the Enter/Play/Pause ®p button 3. Scroll to the “YES” option using the Navigation/ Volume Up ▲ 1 or Down ▼ 2 button. TO RECORD THE FM RADIO 1 1 3 2 While in FM Tuner mode, press the A-B/• button 1 to start recording the selected station.
OPERATION–FM RADIO MODE (CONTINUED) TO AUTOMATICALLY SET PRESETS 1 2 3 1 While in FM Tuner mode, press and hold the Menu button 1 until the Contextual menu appears. Scroll to the “AUTO SEARCH” option using the Navigation/ Volume Up ▲ 2 or Down ▼ 3 button. MANUAL SEARCH 1 2 3 1 While in FM Tuner mode, press and hold the Menu button 1 until the Contextual menu appears. Scroll to the “MANUAL SEARCH” option using the Navigation/ Volume Up ▲ 2 or Down ▼ 3 button.
OPERATION–EBOOK MODE TO VIEW AN Ebook–This unit supports books in txt format. 1 1 2 4 3 5 6 With the unit on, press the Menu button 1 repeatedly until the main menu appears. Select Ebook using the Navigation ▲/ Volume Up 2, Navigation ▼/Volume Down 3, Navigation Right/Skip–Search n 4 and/or Navigation Left/Skip–Search o 5 buttons, followed by the Enter/Play/Pause ®p button 6.
OPERATION–RECORDER MODE TO CREATE A VOICE RECORDING 1 1 2 4 3 5 2 6 With the unit on, press the Menu button 1 repeatedly until the main menu appears. Select Record using the Navigation ▲/ Volume Up 2, Navigation ▼/Volume Down 3, Navigation Right/Skip–Search n 4 and/or Navigation Left/Skip–Search o 5 buttons, followed by the Enter/Play/Pause ®p button 6. 3 Speak into the microphone and the player will create a voice recording.
OPERATION–RECORDER MODE (CONTINUED) RECORDER CONTEXTUAL MENU–RECORD 1 2 3 2 1 While in Record mode, press and hold the Menu button 1 until the Contextual menu appears. Scroll to the “RECORD” option using the Navigation/Volume Up ▲ 2 or Down ▼ 3 button. Press the Enter/Play/Pause ®p button; recording will begin. 1 2 RECORDER CONTEXTUAL MENU–PAUSE 2 3 1 While in Record mode, press and hold the Menu button 1 until the Contextual menu appears.
OPERATION–RECORDER MODE (CONTINUED) RECORDER CONTEXTUAL MENU–RECORD SAVED 1 2 3 2 1 While in Record mode, press and hold the Menu button 1 until the Contextual menu appears. Scroll to the “RECORD SAVED” option using the Navigation/Volume Up ▲ 2 or Down ▼ 3 button. Press the Enter/Play/Pause ®p button; the recording will be saved. You can select RECORD from the Contextual menu to start record again.
OPERATION–RECORDER MODE (CONTINUED) RECORDER CONTEXTUAL MENU–RECORD SETTINGS (For Voice Recording only) 1 2 3 2 1 2 3 1 While in Record mode, press and hold the Menu button 1 until the Contextual menu appears. Scroll to the “RECORD SETTING” option using the Navigation/Volume Up ▲ 2 or Down ▼ 3 button. Press the Enter/Play/Pause ®p button 1; the Settings screen will appear. Scroll to the “ENCODER, DEVICE or RATE” option using the Navigation/Volume Up ▲ 2 or Down ▼ 3 button.
1 OPERATION–BROWSE MODE 1 2 4 3 5 2 6 1 2 3 2 Select the Internal media or External media using the Navigation/Volume Up ▲ 1 or Down ▼ 2 button, followed by the Enter/Play/Pause ®p button 3. With the unit on, press the Menu button 1 repeatedly until the main menu appears. Select Browse using the Navigation ▲/ Volume Up 2, Navigation ▼/Volume Down 3, Navigation Right/ Skip–Search n 4 and/or Navigation Left/ Skip–Search o 5 buttons, followed by the Enter/ Play/Pause ®p button 6.
SETTINGS MENU SETTING THE EQ 1 1 2 4 3 5 2 6 With the unit on, press the Menu button 1 repeatedly until the main menu appears. Select Settings using the Navigation ▲/ Volume Up 2, Navigation ▼/Volume Down 3, Navigation Right/ Skip–Search n 4 and/or Navigation Left/ Skip–Search o 5 buttons, followed by the Enter/ Play/Pause ®p button 6. 3 1 2 2 3 Scroll to the “EQ” option using the Navigation/ Volume Up ▲ 1 or Down ▼ 2 button, then press the Enter/Play/ Pause ®p button 3.
SETTINGS MENU (CONTINUED) SETTING THE VOLUME SETTING 1 1 2 4 3 5 6 With the unit on, press the Menu button 1 repeatedly until the main menu appears. Select Settings using the Navigation ▲/ Volume Up 2, Navigation ▼/Volume Down 3, Navigation Right/ Skip–Search n 4 and/or Navigation Left/ Skip–Search o 5 buttons, followed by the Enter/ Play/Pause ®p button 6.
SETTINGS MENU (CONTINUED) SETTING THE BRIGHTNESS 1 1 2 4 3 5 2 6 2 1 2 3 Scroll to the “BRIGHTNESS” option using the Navigation/Volume Up ▲ 1 or Down ▼ 2 button, then press the Enter/Play/ Pause ®p button 3. With the unit on, press the Menu button 1 repeatedly until the main menu appears.
SETTINGS MENU (CONTINUED) SETTING THE DISPLAY SKIN (BACKGROUND) 1 1 2 4 3 5 2 6 2 1 2 3 Scroll to the “DISPLAY SKIN” option using the Navigation/Volume Up ▲ 1 or Down ▼ 2 button, then press the Enter/Play/Pause ®p button 3. With the unit on, press the Menu button 1 repeatedly until the main menu appears.
SETTINGS MENU (CONTINUED) SETTING THE SLIDE INTERVAL 1 1 2 3 4 5 2 6 2 1 2 3 Scroll to the “SLIDES INTERVAL” option using the Navigation/Volume Up ▲ 1 or Down ▼ 2 button, then press the Enter/Play/Pause ®p button 3. With the unit on, press the Menu button 1 repeatedly until the main menu appears.
SETTINGS MENU (CONTINUED) SETTING THE RECORD SETTINGS (For Voice Recording only) 1 1 2 4 3 5 2 6 2 1 2 3 Scroll to the “RECORD SETTINGS” option using the Navigation/Volume Up ▲ 1 or Down ▼ 2 button, then press the Enter/Play/Pause ®p button 3. With the unit on, press the Menu button 1 repeatedly until the main menu appears.
SETTINGS MENU (CONTINUED) SETTING THE LANGUAGE 1 1 2 3 4 5 2 6 2 1 2 3 Scroll to the “LANGUAGE” option using the Navigation/Volume Up ▲ 1 or Down ▼ 2 button, then press the Enter/Play/Pause ®p button 3. With the unit on, press the Menu button 1 repeatedly until the main menu appears. Select Settings using the Navigation ▲/ Volume Up 2, Navigation ▼/Volume Down 3, Navigation Right/ Skip–Search n 4 and/or Navigation Left/ Skip–Search o 5 buttons, followed by the Enter/ Play/Pause ®p button 6.
SETTINGS MENU (CONTINUED) SETTING THE POWER SAVE 1 1 2 4 3 5 2 3 2 With the unit on, press the Menu button 1 repeatedly until the main menu appears. Select Settings using the Navigation ▲/Volume Up 2, Navigation ▼/Volume Down 3, Navigation Right/ Skip–Search n 4 and/or Navigation Left/ Skip–Search o 5 buttons, followed by the Enter/ Play/Pause ®p button 6.
SETTINGS MENU (CONTINUED) SETTING THE TIME AND DATE 1 1 2 4 3 5 2 6 2 1 2 4 3 Scroll to the desired item to set using the Navigation Left/Skip–Search o 1/Right/ Skip–Search n 2 button, then press the Enter/Play/Pause ®p button 3. Set the selection using the Navigation Left/Skip–Search o 1/Right/Skip–Search n 2 button, then press the Enter/Play/ Pause ®p button 3.
SETTINGS MENU (CONTINUED) FORMATTING THE DRIVE 1 1 2 4 3 5 2 6 2 1 2 3 Scroll to the “FORMAT DRIVE” option using the Navigation/Volume Up ▲ 1 or Down ▼ 2 button, then press the Enter/Play/Pause ®p button 3. With the unit on, press the Menu button 1 repeatedly until the main menu appears.
SETTINGS MENU (CONTINUED) FACTORY SETTING 1 1 2 4 3 5 2 6 2 1 2 3 Scroll to the “FACTORY SETTING” option using the Navigation/Volume Up ▲ 1 or Down ▼ 2 button, then press the Enter/Play/Pause ®p button 3. With the unit on, press the Menu button 1 repeatedly until the main menu appears. Select Settings using the Navigation ▲/ Volume Up 2, Navigation ▼/Volume Down 3, Navigation Right/ Skip–Search n 4 and/or Navigation Left/ Skip–Search o 5 buttons, followed by the Enter/ Play/Pause ®p button 6.
EXTRAS MENU ABOUT 1 1 2 4 3 5 2 6 1 2 3 Scroll to the “ABOUT” option using the Navigation Right/Skip–Search n 1 and/or Navigation Left/Skip–Search o 2 buttons, then press the Enter/Play/Pause ®p button 3. The details (Firmware and Internal/External Memory Used/Free) information will appear. With the unit on, press the Menu button 1 repeatedly until the main menu appears.
EXTRAS MENU (CONTINUED) SETTING THE ALARM 1 1 2 4 3 5 2 6 2 1 2 3 Scroll to the “ALARM” option using the Navigation Right/Skip–Search n 1 and/or Navigation Left/Skip–Search o 2 buttons, then press the Enter/Play/Pause ®p button 3. With the unit on, press the Menu button 1 repeatedly until the main menu appears.
5 EXTRAS MENU (CONTINUED) 1 2 6 1 3 2 Scroll to the hour using the Navigation Left/Skip–Search o 1/Right/Skip–Search n 2 button, then press the Enter/Play/ Pause ®p button 3. Set the desired alarm hour using the Navigation Left/ Skip–Search o 1/Right/Skip–Search n 2 button, then press the Enter/Play/ Pause ®p button 3. 3 Scroll to the minute using the Navigation Left/Skip–Search o 1/Right/Skip–Search n 2 button, then press the Enter/Play/Pause ®p button 3.
CALENDAR 1 1 EXTRAS MENU (CONTINUED) 2 4 3 5 2 6 2 3 Scroll to the “CALENDAR” option using the With the unit on, press the Menu button 1 repeatedly until the main menu appears. Select Extras using the Navigation ▲/ Volume Up 2, Navigation ▼/Volume Down 3, Navigation Right/ Skip–Search n 4 and/or Navigation Left/ Skip–Search o 5 buttons, followed by the Enter/ Play/Pause ®p button 6.
TROUBLESHOOTING GUIDE If you experience a problem with this unit, check the chart below before calling for service. SYMPTOM Unit will not turn on. No sound. The computer is not recognizing the player. WMA files with DRM can’t playback. CAUSE Battery is low/empty. Power is not turned on. Headphones are not inserted. Volume is set too low. The media files are corrupted. No files are in the player. The player is not securely connected. Computer is not compatible. Incorrect downloading methods.
TROUBLESHOOTING GUIDE (CONTINUED) SYMPTOM No buttons work. Unit acting erratically. CAUSE The Lock feature is activated. Unit needs to be reset or firmware needs to be updated. Unit needs to be reset or firmware needs to be updated. 66 SOLUTION Deactivate Lock feature as described on page 22. Reset unit and/or update firmware, see page 68. Reset unit and/or update firmware, see page 68.
FORMATTING THE PLAYER Formatting the Player WARNING! Do not format this player unless it stops working and you are instructed to do so by technical support personnel. 1. Use the USB cable to connect the player and the computer. 2. Double click on My Computer, then right click “MTP Player” or “Media Player” and left click on "Format". 3. For “MTP Player” or “Media Player”, at the "Format" window, click OK to confirm and the player will start to format (see figure to the right).
RESETTING THE UNIT If the unit acts erratically, reset the unit by inserting a thin object (such as a paper clip) into the recessed Reset button. For the Reset button, see page 6 for the button's location. FOR FIRMWARE UPGRADE Please visit our Web site at www.memorexelectronics.com to check if there is new firmware available. IMPORTANT NOTE: Before upgrading the firmware, please backup all of your media files on your computer. After upgrading, format the unit to complete the upgrade procedure.
Audio File Support FM Tuner General SPECIFICATIONS Frequency Range Headphones Output S/N Ratio MP3 WMA WAV Picture Ebook AVI (MPEG4) WMV9 FM Frequency Range Antenna Dimension Weight USB Built-in Memory Built-in Battery Max. Playtime Supported OS Operating Temperature LCD Display 20Hz–20KHz 9mW, 32 ohm (Max Vol) 90dB (MP3) 54dB (Tuner) MPEG 1/2/2.5 Layer 3 with a Bit Rate of 32-320 kbps Windows Media Audio (WMA file with DRM 10) with a Bit Rate of 48-192 kbps Up to 44.1kHz).
FOR FIRMWARE UPGRADE, PLEASE VISIT OUR WEBSITE AT WWW.MEMOREXELECTRONICS.COM TO CHECK IF THERE IS NEW FIRMWARE AVAILABLE. FOR ADDITIONAL SET-UP OR OPERATING ASSISTANCE, PLEASE VISIT OUR WEBSITE AT: WWW.MEMOREXELECTRONICS.COM OR CONTACT CUSTOMER SERVICE: For customers calling within US, call 1-800-919-3647. For customers calling within Mexico, call 001-866-580-8316.
ÍNDICE Funcionamiento-Modo de Reproducción de Fotos .................................................................35 • Visualizar Fotos ............................................35 • Menú contextual de fotos..............................36 Funcionamiento– Modo radio FM...................40 • Escuchar la radio FM....................................40 • Para agregar memorias ................................41 • Para cargar memorias ..................................41 • Para borrar una memoria..........
PRECAUCIONES DERECHO DE AUTOR: • La distribución de copias de pistas en formato MP3, WMA, WMA con archivos DRM y/o WAV sin premiso es una violación de las leyes internacionales de los derechos de autor. • Este producto se encuentra protegido por derechos de propiedad intelectual de Microsoft. La utilización o distribución de dicha tecnología fuera del ámbito de este producto y sin la licencia otorgada por Microsoft, se encuentra prohibida.
DECLARACIÓN DE LA FCC Este aparato cumple con el Apartado 15 de las normas de la FCC. El funcionamiento está sujeto a las siguientes dos condiciones: (1) Este aparato no debe causar interferencia dañina y (2) este aparato debe aceptar cualquier interferencia que reciba, incluso aquella interferencia que pueda causar una operación indeseada.
Estimado Cliente: En el momento en que seleccionó un equipo de tan alta tecnología como el que usted acaba de comprar, su entretenimiento musical recién comenzó. Ahora es tiempo de pensar en cómo puede optimizar el entretenimiento que su equipo le ofrece.
Nivel de decibeles 30 40 50 60 70 80 Ejemplo Una biblioteca, susurros. Sala, refrigerador, dormitorio lejos del tráfico. Semáforo, conversación normal, oficina tranquila. Aire acondicionado a 20 pies, máquina de coser Aspiradora, secadora de pelo, restaurante bullicioso. Tráfico en la calle, triturador de basura, alarma de reloj a 60 cm. 90 100 120 140 180 Metro, motocicletas, tráfico de camiones, podadora de césped. Camión de basura, sierra eléctrica, perforadora neumática.
UBICACIÓN DE LOS CONTROLES 1. 2. 3. 4. 5. 6. 7. 8. 9. 1 6 2 7 8 3 9 4 5 10 Botón A-B/• Botón de navegación ▲/aumento del volumen (Volume Up) Botón de Menú (Menu) Pantalla Botón de navegación ▼/disminución del volumen (Volume Down) Selector de Encendido/Apagado/Bloqueo (Power/Lock) Navegación hacia la derecha/SaltoBúsqueda (Skip–Search) n Ranura para micro USB (CABLE USB. PIEZA N.º T225-030486-910*) Botón Aceptar/Reproducir/Pausar (Enter/Play/Pause) ®p 10. 11. 12. 13. 14. 15.
CARGAR LAS PILAS Esta unidad posee una pila recargable incorporada de Polímeros de Litio. Cuando las barras del indicador de la pila (en la pantalla) estén bajas (Figura 1), y antes de usar la unidad por primera vez, recargue la pila del siguiente modo: 1. Conecte el cable USB en la entrada USB de esta unidad (como indica la ilustración) y en el puerto USB de su computadora; los mensajes “USB CONECTADO” (USB CONNECTED) y “CARGANDO” (CHARGING) aparecerán en la pantalla.
1 UTILIZACIÓN DE LA CORREA 2 Inserte la cuerda en el orificio de la Pase el extremo de la correa a unidad principal. través de la cuerda hasta que quede ajustado. INSTALACIÓN DEL SOFTWARE CD de instalación del software (PIEZA N.º TR00-406982-010*) Información general Esta unidad es compatible con Microsoft Windows XP (Edición Hogar o Profesional con Service Pack 2 o superior) o Vista. MediaCoder es compatible con Microsoft Windows XP y Vista.
INSTALACIÓN DEL REPRODUCTOR DE WINDOWS MEDIA 10 El Reproductor de Windows Media 10 únicamente es para utilizarse con Windows XP. Consulte la página 12 para saber como instalar Windows Media Player 11. (Los usuarios de Windows Vista deben utilizar Windows Media Player 11). Una vez instalado el Reproductor de Windows Media 10, puede transferir archivos MP3, WMA, WMA con DRM 10 a su reproductor usando la función de “Sincronización”. 1.
INSTALACIÓN DEL REPRODUCTOR DE WINDOWS MEDIA 10 4. La instalación continuará. 5. En la pantalla de bienvenida, haga clic en SIGUIENTE. 6. Seleccione las opciones de privacidad deseadas.
INSTALACIÓN DEL REPRODUCTOR DE WINDOWS MEDIA 10 7. Haga clic en la Declaración de privacidad para verla, si así lo desea. Cuando termine, haga clic en “Siguiente”. 8. Lea las instrucciones y active las casillas de verificación deseadas. Luego haga clic en Más opciones y active las casillas de verificación deseadas. 9. Haga clic en “Finalizar” para finalizar la instalación del Reproductor de Windows Media 10.
INSTALACIÓN DEL REPRODUCTOR DE WINDOWS MEDIA 11 Una vez que haya instalado Windows Media Player 11, podrá transferir archivos MP3, WMA, WMA con DRM 10 y fotografías a su reproductor utilizando la función “Sync”. 1. 2. 3. Introduzca el CD-Rom de instalación en la unidad de CD, aparecerá la pantalla de instalación. Si no aparece automáticamente la pantalla de instalación, haga doble clic en Mi PC, luego doble clic en unidad de CD. Aparecerá la pantalla de instalación.
4. INSTALACIÓN DEL REPRODUCTOR DE WINDOWS MEDIA 11 Lea el Contrato de Licencia, luego haga clic en “Acepto”. 5. La instalación continuará. 6. En la pantalla de Bienvenida, se recomienda seleccionar “Configuraciones rápidas” (“Express Settings”) y luego hacer clic en “Finalizar” (“Finish”). Se abrirá el Windows Media Player 11 recién instalado. También es probable que aparezca una ventana emergente que le pregunte: “Existe una actualización de Windows Media Player disponible.
INSTALACIÓN DE MEDIACODER Procedimiento para instalar MediaCoder 1. Introduzca el CD-Rom de instalación en la unidad de CD; aparecerá la pantalla de instalación. Si no aparece automáticamente la pantalla de instalación, haga doble clic en Mi PC, luego doble clic en unidad de CD. Aparecerá la pantalla de instalación. Después de seleccionar “Instalar el Software para PC” (Install PC Software), haga clic en “Descargar e instalar MediaCoder para Windows” (Download & Install MediaCoder for Windows). 2.
INSTALACIÓN DE MEDIACODER 4. Aparecerá la pantalla “Carpeta de instalación” (Installation Folder). Se recomienda dejar la carpeta como está. Luego haga clic en “Instalar” (Install); el programa se instalará. 5. Cuando finaliza la instalación, aparecerá la pantalla “Finalizando el asistente de instalación” (Completing Setup Wizard). Haga clic en “Finalizar” (Finish) para terminar la instalación. Consulte la página 19 para saber cómo usar MediaCoder.
DESCARGA Y TRANSFERENCIA DE ARCHIVOS TRANSFERIR ARCHIVOS Podrá descargar archivos digitales de música desde Internet o utilizar un software de codificación para convertir la música de los CD de audio al formato MP3 o WMA. Una vez que los archivos están almacenados en la computadora, puede copiarlos fácilmente en el reproductor.
DESCARGA Y TRANSFERENCIA DE ARCHIVOS (CONTINUACIÓN) CONVERSIÓN DE UN CD DE AUDIO A FORMATO MP3 O WMA. Para Windows XP, también puede utilizar Windows Media Player 10 u 11 previamente instalado para convertir música de un CD de audio a formato MP3 o WMA como se describe a continuación: 1. Abra el Navegador (Browser) de Windows Media Player 10 u 11, luego haga clic en el ícono “Grabar” (“Rip”) que aparece en la parte superior de la barra de herramientas.
DESCARGA Y TRANSFERENCIA DE ARCHIVOS (CONTINUACIÓN) TRANSFERIR ARCHIVOS MP3/WMA/VIDEO/FOTOS Y ARCHIVOS WMA CON DRM 10 UTILIZANDO WINDOWS MEDIA PLAYER 10 (SÓLO PARA WINDOWS XP) Para transferir archivos MP3/WMA/FOTOS/VIDEOS/WMA con DRM 10 al reproductor utilizando el WMP (Windows Media Player) 10 instalado anteriormente, siga las siguientes instrucciones. Antes de comenzar conecte la unidad a la computadora como se indicó previamente. 1. Abra el reproductor “Windows Media Player 10” y haga clic en “Sync”. 2.
USO DEL MEDIACODER Puede usar el MediaCoder previamente instalado para convertir archivos MPG, MPG4, ASF, AVI y WMV en archivos AVI compatibles con el reproductor. 1. Abra el programa MediaCoder previamente instalado. 2. Haga clic en el icono “Agregar archivo” (Add file) para agregar los archivos que desea convertir. En la ventana “Agregar archivo” (Add file), seleccione el archivo fuente que desea convertir y haga clic en el botón “Abrir” (Open).
CÓMO QUITAR EL HARDWARE CON SEGURIDAD CÓMO QUITAR SU REPRODUCTOR CON SEGURIDAD DE LA COMPUTADORA NOTA: Para evitar daños a su reproductor o pérdida de datos, respete siempre el procedimiento detallado a continuación antes de desconectar su reproductor del puerto USB de su computadora. Con el mouse, haga doble clic en el icono “Quitar Hardware con seguridad” (Safely Remove Hardware) en la barra de tareas.
FUNCIONAMIENTO GENERAL Botón de MENÚ ENCENDIDO/APAGADO (ON/OFF) 1 1 Para encender la unidad, deslice el interruptor de Encendido/Apagado/Bloqueo (Power/Lock) hacia la izquierda y libérelo; la unidad pasará al modo Música y se pausará. Para apagar la unidad, deslice el interruptor de Encendido/Apagado/Bloqueo (Power/Lock) hacia la izquierda y sosténgalo. No suelte el interruptor de Encendido/Apagado/Bloqueo (Power/Lock) hasta que la unidad no se haya apagado.
FUNCIONAMIENTO GENERAL (CONTINUACIÓN) ENTRADA PARA AURICULARES 1 BOTONES DE VOLUMEN 1 1 2 Conecte los auriculares (incluidos) en la entrada para Auriculares ubicada en el lateral de la unidad. FUNCIÓN BLOQUEO 1 Para controlar el volumen, simplemente oprima el botón de . navegación/aumentar el volumen (Volume Up) ▲ 1 o Disminución del volumen (Volume Down) ▼ 2 durante la reproducción. NOTA: En la pantalla se mostrará el nivel del volumen con una barra y un número (0 a 40).
MENÚ PRINCIPAL (MAIN MENU) MENÚ PRINCIPAL (MAIN MENU): Oprima el botón Menú varias veces hasta que aparezca el Menú principal (Main Menu) para acceder a este menú. Seleccione la función que desea reproducir o configurar. Libro electrónico (Ebook) consulte la página 44. - Video - consulte la página 33. Fotografías - consulte la página 35. Grabación - consulte la página 45. Música - consulte la página 24. 23 Sintonizador de FM - consulte la página 40. Navegador - consulte la página 49.
FUNCIONAMIENTO-MODO DE REPRODUCCIÓN DE MÚSICA PARA ESCUCHAR MP3s/WMAs Esta unidad es compatible con los siguientes formatos de audio: MP3, MPEG 1/2/2.5 Capa 3 con una tasa de transferencia de 32-320 kbps y archivos WMA o WMA con DRM 10 con una tasa de transferencia de 48-192 kbps. 1 1 2 4 3 5 2 6 1 2 Con la unidad encendida, oprima el botón Menú 1 varias veces hasta que aparezca el menú principal.
FUNCIONAMIENTO-MODO DE REPRODUCCIÓN DE MÚSICA (CONTINUACIÓN) 3 1 3 2 Para navegar por sus canciones, lea la siguiente información: Reproducir todo (Play All): Seleccione esta opción para reproducir todos los archivos de audio. Artista: Se mostrará a Todos los Artistas en la pantalla.
FUNCIONAMIENTO-MODO DE REPRODUCCIÓN DE MÚSICA (CONTINUACIÓN) NOTAS: • Consulte las páginas 16-18 para saber como cargar archivos MP3/WMA a la unidad. • Mientras busca música, podrá oprimir el botón Menú para regresar al menú anterior. • Puede pausar la reproducción durante la reproducción de música presionando Aceptar/Reproducir/Pausar (Enter/Play/Pause)®p ; el icono de Pausa (Pause) aparecerá en la pantalla y la canción permanecerá pausada hasta que el botón se oprima nuevamente.
FUNCIONAMIENTO-MODO DE REPRODUCCIÓN DE MÚSICA (CONTINUACIÓN) SALTAR HACIA ADELANTE/ATRÁS (FORWARD/REVERSE SKIP) 1 2 Durante la reproducción, oprima el botón de Navegación Izquierdo/Salto-Búsqueda o (Skip–Search) para retroceder el reproductor al inicio del archivo en reproducción actual. Oprima el botón de Navegación Izquierdo/Salto/Búsqueda (Skip–Search) o repetidamente para retroceder el reproductor a archivos anteriores.
FUNCIONAMIENTO-MODO DE REPRODUCCIÓN DE MÚSICA (CONTINUACIÓN) MENÚ CONTEXTUAL DE MÚSICA–FAVORITOS 2 1 1 2 Deslícese hasta la opción “BASCULADOR A FAVORITOS” (TOGGLE FAVOURITES) con el botón de navegación/aumentar el volumen (Volume Up) ▲ 1 o Disminución del volumen (Volume Down) ▼2.
FUNCIONAMIENTO-MODO DE REPRODUCCIÓN DE MÚSICA (CONTINUACIÓN) MENÚ CONTEXTUAL DE MÚSICA–ECUALIZADOR 2 1 1 2 Desplácese hasta la opción “EQ” con el botón de Navegación/Aumento del volumen (Volume Up) ▲ 1 o Disminución del volumen (Volume Down) ▼ 2 . Luego, presione Aceptar/Reproducir/Pausar (Enter/Play/Pause) ®p 3. Mientras se encuentra en modo de reproducción de música (pantalla de Reproduciendo ahora [Now Playing screen]), mantenga presionado el botón Menu hasta que aparezca el menú Contextual.
FUNCIONAMIENTO-MODO DE REPRODUCCIÓN DE MÚSICA (CONTINUACIÓN) MENÚ CONTEXTUAL DE MÚSICA–MODO REPRODUCCIÓN 2 1 1 2 Mientras se encuentra en modo de reproducción de música (pantalla de Reproduciendo ahora [Now Playing screen]), mantenga presionado el botón Menu hasta que aparezca el menú Contextual. 3 3 Deslícese hasta la opción “MODO REPRODUCCIÓN” (PLAY MODE) con el botón de navegación/aumentar el volumen (Volume Up) ▲ 1 o Disminución del volumen (Volume Down) ▼ 2 .
FUNCIONAMIENTO-MODO DE REPRODUCCIÓN DE MÚSICA (CONTINUACIÓN) MENÚ CONTEXTUAL DE MÚSICA–CLASIFICACIÓN DE PISTAS 2 1 1 2 Mientras se encuentra en modo de reproducción de música (pantalla de Reproduciendo ahora [Now Playing screen]), mantenga presionado el botón Menu hasta que aparezca el menú Contextual. 3 2 3 3 Deslícese hasta la opción “RATE TRACK con el botón de navegación/aumentar el volumen (Volume Up) ▲ 1 o Disminución del volumen (Volume Down) ▼ 2 .
FUNCIONAMIENTO-MODO DE REPRODUCCIÓN DE MÚSICA (CONTINUACIÓN) MENÚ CONTEXTUAL DE MÚSICA–COMPRAR AHORA 2 1 1 2 Mientras se encuentra en modo de reproducción de música (pantalla de Reproduciendo ahora [Now Playing screen]), mantenga presionado el botón Menu hasta que aparezca el menú Contextual. 3 3 Deslícese hasta la opción “RATE TRACK” con el botón de navegación/aumentar el volumen (Volume Up) ▲ 1 o Disminución del volumen (Volume Down) ▼ 2.
FUNCIONAMIENTO-MODO DE REPRODUCCIÓN DE VIDEO MIRAR VIDEOS Esta unidad es compatible con los siguientes formatos de video: AVI-MPEG4 Perfil simple (resolución de 320x240, 20-24 fps, 385kbps); WMV - VC-1 Perfil simple (resolución de 220x176, 30fps, 385kbps máx.) 1 1 2 4 3 5 2 6 Con la unidad encendida, oprima el botón Menú 1 varias veces hasta que aparezca el menú principal.
FUNCIONAMIENTO-MODO DE REPRODUCCIÓN DE VIDEO (CONTINUACIÓN) BÚSQUEDA DE VIDEOS A ALTA VELOCIDAD 1 Durante la reproducción, oprima y mantenga presionado el botón de Navegación Derecho/SaltoBúsqueda (Skip–Search)n 1 o Izquierdo/o 2 para avanzar o retroceder el reproductor dentro de un video para encontrar una escena específica. El reproductor avanzará o retrocederá a alta velocidad mientras que mantenga presionado el botón. Cuando libera el botón, se reanuda la reproducción normal.
FUNCIONAMIENTO–MODO DE REPRODUCCIÓN DE FOTOGRAFÍAS PARA VER FOTOGRAFÍAS–Esta unidad es compatible con el formato baseline JPEGs. 1 1 2 4 3 5 6 Con la unidad encendida, oprima el botón Menú 1 varias veces hasta que aparezca el menú principal.
FUNCIONAMIENTO–MODO DE REPRODUCCIÓN DE FOTOGRAFÍAS (CONTINUACIÓN) MENÚ CONTEXTUAL DE FOTOGRAFÍAS–PANEO Y ZOOM 2 1 1 3 2 Mientras se encuentra en modo de reproducción de fotos, mantenga presionado el botón Menu hasta que aparezca el menú Contextual. 3 Navegue hasta la opción “PANEO Y ZOOM” (PAN AND ZOOM) con el botón de navegación/aumentar el volumen (Volume Up) ▲ 1 o Disminución del volumen (Volume Down) ▼ 2 , luego oprima Aceptar/Reproducir/Pausar (Enter/Play/Pause) ®p 3.
FUNCIONAMIENTO–MODO DE REPRODUCCIÓN DE FOTOGRAFÍAS (CONTINUACIÓN) MENÚ CONTEXTUAL DE FOTOGRAFÍAS–PRESENTACIÓN CON DIAPOSITIVAS 2 1 1 2 Durante la reproducción de las fotos seleccionadas, mantenga presionado el botón Menu hasta que aparezca el menú Contextual.
FUNCIONAMIENTO–MODO DE REPRODUCCIÓN DE FOTOGRAFÍAS (CONTINUACIÓN) VISTA EN MINIATURA 1 2 3 2 1 2 1 3 Durante la reproducción de las fotos seleccionadas, mantenga presionado el botón Menu 1 hasta que aparezca el menú Contextual. Deslícese hasta la opción “VISTA EN MINIATURA” (THUMBNAIL) con el botón de navegación/aumentar el volumen (Volume Up) ▲ 2 o Disminución del volumen (Volume Down) ▼3.
FUNCIONAMIENTO–MODO DE REPRODUCCIÓN DE FOTOGRAFÍAS (CONTINUACIÓN) MENÚ CONTEXTUAL DE FOTOGRAFÍAS–PANTALLA COMPLETA ENCENDIDA/APAGADA (ON/OFF) 2 1 1 2 Durante la reproducción de las fotos seleccionadas, mantenga presionado el botón Menu hasta que aparezca el menú Contextual.
FUNCIONAMIENTO–MODO DE RADIO FM PARA ESCUCHAR RADIO FM 1 1 2 4 3 5 6 Con la unidad encendida, oprima el botón Menú 1 varias veces hasta que aparezca el menú principal.
FUNCIONAMIENTO–MODO DE RADIO FM (CONTINUACIÓN) PARA AGREGAR MEMORIAS (HASTA 30) 1 2 3 1 4 Mientras se encuentra en modo de sintonización de FM, mantenga presionado el botón Menu 1 hasta que aparezca el menú Contextual. Deslícese hasta la opción “CONFIGURACIÓN DE MEMORIAS” (PRESET ACTIONS) con el botón de navegación/aumentar el volumen (Volume Up) ▲ 2 o Disminución del volumen (Volume Down) ▼ 2 , luego oprima Aceptar/Reproducir/Pausar (Enter/Play/ Pause) ®p 3.
FUNCIONAMIENTO–MODO DE RADIO FM (CONTINUACIÓN) PARA BORRAR UNA MEMORIA 1 1 3 2 PARA GRABAR LA RADIO FM 1 3 2 3 Mientras se encuentra en modo de sintonización de FM, mantenga presionado el botón Menu hasta que aparezca el menú Contextual. Deslícese hasta la opción “BORRAR” (DELETE) con el botón de navegación/aumentar el volumen (Volume Up) ▲ 1 o Disminución del volumen (Volume Down) ▼ 2 , luego oprima Aceptar/Reproducir/ Pausar (Enter/Play/Pause) ®p 3.
FUNCIONAMIENTO–MODO DE RADIO FM (CONTINUACIÓN) PARA CONFIGURAR MEMORIAS AUTOMÁTICAMENTE 1 2 3 1 2 Mientras se encuentra en modo de sintonización de FM, mantenga presionado el botón Menu 1 hasta que aparezca el menú Contextual. Navegue hasta la opción “BÚSQUEDA AUTOMÁTICA” (AUTO SEARCH) con el botón de navegación/aumentar el volumen (Volume Up) ▲ 2 o Disminución del volumen (Volume Down) ▼3.
FUNCIONAMIENTO–MODO LIBRO ELECTRÓNICO (EBOOK) PARA VER UN libro electrónico (Ebok)–Esta unidad es compatible con libros en formato txt. 1 1 2 4 3 5 6 Con la unidad encendida, oprima el botón Menú 1 varias veces hasta que aparezca el menú principal.
FUNCIONAMIENTO–MODO GRABACIÓN CREAR UNA GRABACIÓN DE VOZ 1 1 2 4 3 5 2 6 Con la unidad encendida, oprima el botón Menú 1 varias veces hasta que aparezca el menú principal. Seleccione la opción Grabar (Record) con los botones de Navegación ▲/Aumento del volumen (Volume Up) 2, Navegación ▼/Disminución del volumen (Volume Down) 3, Navegación derecho/Salto–Búsqueda (Skip–Search) n 4 o Navegación izquierdo/ Salto–Búsqueda (Skip–Search) o 5 .
FUNCIONAMIENTO–MODO GRABACIÓN (CONTINUACIÓN) MENÚ CONTEXTUAL DE LA GRABADORA–GRABAR 1 2 3 2 1 En el modo Grabación, mantenga presionado el botón Menú 1 hasta que aparezca el menú Contextual. Navegue hasta la opción “GRABAR” (RECORD) con el botón de Navegación/ Aumentar el volumen (Volume Up) ▲ 2 o Disminuir el volumen (Volume Down) ▼ 3 . Oprima el botón Aceptar/Reproducir/Pausar (Enter/Play/Pause) ®p , comenzará la grabación.
FUNCIONAMIENTO–MODO GRABACIÓN (CONTINUACIÓN) MENÚ CONTEXTUAL DE LA GRABADORA–GUARDAR GRABACIÓN 1 2 3 2 1 Oprima el botón Aceptar/Reproducir/Pausar (Enter/Play/Pause) ®p para guardar la grabación. Puede seleccionar la opción GRABAR (RECORD) del menú Contextual para comenzar a grabar nuevamente. En el modo Grabación, mantenga presionado el botón Menú 1 hasta que aparezca el menú Contextual.
FUNCIONAMIENTO–MODO GRABACIÓN (CONTINUACIÓN) MENÚ CONTEXTUAL DE LA GRABADORA–CONFIGURACIÓN DE LA GRABACIÓN (SÓLO PARA GRABACIÓN DE VOZ) 1 2 3 2 1 2 3 1 En el modo Grabación, mantenga presionado el botón Menú 1 hasta que aparezca el menú Contextual. Desplácese hasta la opción “CONFIGURACIÓN DE LA GRABACIÓN” (RECORD SETTING) con el botón de Navegación/Aumentar el volumen (Volume Up) ▲ 2 o Disminuir el volumen (Volume Down) ▼ 3.
1 FUNCIONAMIENTO–MODO EXAMINAR 1 2 4 3 5 2 6 1 2 3 2 Seleccione el dispositivo Interno o Externo con el botón de Navegación/Aumentar el volumen (Volume Up) ▲ 1 o Disminuir el volumen (Volume Down) ▼ 2 . Luego, presione Aceptar/Reproducir/Pausar (Enter/Play/Pause) ®p 3. Con la unidad encendida, oprima el botón Menú 1 varias veces hasta que aparezca el menú principal.
MENÚ DE CONFIGURACIÓN CONFIGURACIÓN DEL EQ (Ecualizador) 1 1 2 4 3 5 2 6 Con la unidad encendida, oprima el botón Menú 1 varias veces hasta que aparezca el menú principal. Seleccione la opción Configuración con los botones de navegación ▲/aumentar el volumen (Volume Up) 2, navegación ▼/disminuir el volumen (Volume Down) 3, Navegación derecho/Salto–Búsqueda (Skip–Search) n 4 o Navegación izquierdo/Salto–Búsqueda (Skip–Search) o 5 . Luego, oprima Aceptar/Reproducir/Pausar (Enter/Play/Pause) ®p 6.
MENÚ DE CONFIGURACIÓN (CONTINUACIÓN) CONFIGURACIÓN DEL VOLUMEN 1 1 2 4 3 5 6 Con la unidad encendida, oprima Menú 1 varias veces hasta que aparezca el menú principal. Seleccione la opción Configuración con los botones de navegación ▲/aumentar el volumen (Volume Up) 2, navegación ▼/disminuir el volumen (Volume Down) 3, Navegación derecho/Salto–Búsqueda (Skip–Search) n 4 o Navegación izquierdo/Salto– Búsqueda (Skip–Search) o 5. Luego, oprima Aceptar/Reproducir/Pausar (Enter/ Play/Pause) ®p 6.
MENÚ DE CONFIGURACIÓN (CONTINUACIÓN) CONFIGURACIÓN DEL BRILLO 1 1 2 4 3 5 2 6 2 1 2 3 Desplácese hasta la opción “BRILLO” (BRIGHTNESS) con el botón de Navegación/Aumentar el volumen (Volume Up) ▲ 1 o Disminuir el volumen (Volume Down) ▼ 2 . Luego, presione Aceptar/Reproducir/Pausar (Enter/Play/Pause) ®p 3. Con la unidad encendida, oprima Menú 1 varias veces hasta que aparezca el menú principal.
MENÚ DE CONFIGURACIÓN (CONTINUACIÓN) CONFIGURACIÓN DE LA CARÁTULA DE LA PANTALLA (FONDO) 1 1 2 4 3 5 2 6 2 1 2 3 Desplácese hasta la opción “CARÁTULA DE LA PANTALLA” (DISPLAY SKIN) con el botón de Navegación/Aumento del volumen (Volume Up) ▲ 1 o Disminuir el volumen (Volume Down) ▼ 2 . Luego, presione Aceptar/Reproducir/Pausar (Enter/Play/Pause) ®p 3. Con la unidad encendida, oprima Menú 1 varias veces hasta que aparezca el menú principal.
MENÚ DE CONFIGURACIÓN (CONTINUACIÓN) CONFIGURACIÓN DEL INTERVALO DE TIEMPO DE DIAPOSITIVAS 1 1 2 3 4 5 2 6 2 1 2 3 Desplácese hasta la opción “INTERVARLO DE DIAPOSITIVAS” (SLIDES INTERVAL) con el botón de Navegación/Aumentar el volumen (Volume Up) ▲ 1 o Disminuir el volumen (Volume Down) ▼ 2 . Luego, presione Aceptar/Reproducir/Pausar (Enter/Play/Pause) ®p 3. Con la unidad encendida, oprima Menú 1 varias veces hasta que aparezca el menú principal.
MENÚ DE CONFIGURACIÓN (CONTINUACIÓN) CONFIGURACIÓN DEL MODO DE GRABACIÓN ((SÓLO PARA GRABACIÓN DE VOZ) 1 1 2 4 3 5 2 6 2 1 2 3 Desplácese hasta la opción “CONFIGURACIÓN DE LA GRABACIÓN” (RECORD SETTING) con el botón de Navegación/Aumento del volumen (Volume Up) ▲ 1 o Disminuir el volumen (Volume Down) ▼ 2 . Luego, presione Aceptar/Reproducir/ Pausar (Enter/Play/Pause) ®p 3. Con la unidad encendida, oprima Menú 1 varias veces hasta que aparezca el menú principal.
MENÚ DE CONFIGURACIÓN (CONTINUACIÓN) CONFIGURACIÓN DE IDIOMA 1 1 2 3 4 5 2 6 2 1 2 3 Desplácese hasta la opción “IDIOMA” (LANGUAGE) con el botón de Navegación/Aumentar el volumen (Volume Up) ▲ 1 o Disminuir el volumen (Volume Down) ▼ 2 . Luego, presione Aceptar/Reproducir/Pausar (Enter/Play/Pause) ®p 3. Con la unidad encendida, oprima Menú 1 varias veces hasta que aparezca el menú principal.
MENÚ DE CONFIGURACIÓN (CONTINUACIÓN) CONFIGURACIÓN DE LA FUNCIÓN DE AHORRO DE ENERGÍA 1 1 2 4 3 5 2 3 2 Con la unidad encendida, oprima Menú 1 varias veces hasta que aparezca el menú principal. Seleccione la opción Configuración con los botones de navegación ▲/aumentar el volumen (Volume Up) 2, navegación ▼/disminuir el volumen (Volume Down) 3, Navegación derecho/Salto–Búsqueda (Skip–Search) n 4 o Navegación izquierdo/ Salto–Búsqueda (Skip–Search) o 5.
MENÚ DE CONFIGURACIÓN (CONTINUACIÓN) AJUSTE DE LA FECHA Y HORA 1 1 2 4 3 5 2 6 2 1 2 4 3 Desplácese hasta el elemento que desea configurar con los botones de Navegación Izquierdo/Salto–Búsqueda (Skip–Search) o 1/Derecho/Salto–Búsqueda (Skip–Search) n 2 . Luego, oprima Aceptar/Reproducir/ Pausar (Enter/Play/Pause) ®p 3. Confirme la selección con los botones de Navegación Izquierdo/Salto –Búsqueda (Skip–Search) o 1/Derecho/Salto –Búsqueda (Skip–Search) n 2 .
MENÚ DE CONFIGURACIÓN (CONTINUACIÓN) FORMATEAR LA UNIDAD 1 1 2 4 3 5 2 6 2 1 2 3 Para formatear la unidad, seleccione OK con el botón de Navegación/Aumentar el volumen (Volume Up) ▲ 1 o Disminuir el volumen (Volume Down) ▼ 2. Luego, oprima Aceptar/Reproducir/ Pausar (Enter/Play/Pause) ®p 3 para confirmar. Presione Cancelar (Cancel) para detener la operación.
MENÚ DE CONFIGURACIÓN (CONTINUACIÓN) CONFIGURACIÓN PREDETERMINADA DE FÁBRICA 1 1 2 4 3 5 2 6 2 1 2 3 Para restablecer las opciones a la configuración predeterminada, seleccione OK con el botón de Navegación/ Aumento del volumen (Volume Up) ▲ 1 o Disminuir el volumen (Volume Down) ▼ 2. Luego, oprima Aceptar/Reproducir/Pausar (Enter/Play/Pause) ®p 3 para confirmar. Presione Cancelar (Cancel) para detener la función.
ACERCA DE 1 1 MENÚ DE EXTRAS 2 4 3 5 2 6 1 2 3 Desplácese hasta la opción “ACERCA DE” con los botones de Navegación Derecho/Salto–Búsqueda (Skip–Search) n 1 o Navegación Izquierdo/Salto–Buscar (Skip–Search) o 2. Luego, oprima Aceptar/Reproducir/Pausar (Enter/Play/Pause) ®p 3. Aparecerá la información (Firmware y memoria interna/externa usada/libre). Con la unidad encendida, oprima Menú 1 varias veces hasta que aparezca el menú principal.
MENÚ DE EXTRAS (CONTINUACIÓN) CONFIGURACIÓN DE LA ALARMA 1 1 2 4 3 5 2 6 2 1 2 3 Desplácese hasta la opción “ALARMA” (ALARM) con los botones de Navegación Derecho/Salto–Búsqueda (Skip–Search) n 1 o Navegación Izquierdo/Salto–Búsqueda (Skip –Search) o 2. Luego, oprima Aceptar/ Reproducir/Pausar (Enter/Play/Pause) ®p 3. Con la unidad encendida, oprima Menú 1 varias veces hasta que aparezca el menú principal.
5 MENÚ DE EXTRAS (CONTINUACIÓN) 1 2 6 1 3 2 Desplácese hasta la hora con los botones de Navegación Izquierdo/Salto–Búsqueda (Skip–Search) o 1 /Derecho/ Salto– Búsqueda (Skip–Search) n 2. Luego, oprima Aceptar/Reproducir/Pausar (Enter/ Play/Pause) ®p 3. Configure la hora en que desea que suene la alarma con los botones de Navegación Izquierdo/Salto–Búsqueda (Skip–Search) o 1/Derecho/Salto–Búsqueda (Skip–Search) n 2. Luego, oprima Aceptar/ Reproducir/Pausar (Enter/Play/Pause) ®p 3.
MENÚ DE EXTRAS (CONTINUACIÓN) CALENDARIO 1 1 2 4 3 5 2 6 2 3 Desplácese hasta la opción “CALENDARIO” (CALENDAR) con los botones de Navegación Izquierdo/Salto–Búsqueda (Skip–Search) o 1/Derecho/Salto–Búsqueda (Skip–Search) n 2 y luego, oprima Aceptar/Reproducir/Pausar (Enter/Play/Pause) ®p 3. Con la unidad encendida, oprima Menú 1 varias veces hasta que aparezca el menú principal.
GUÍA DE RESOLUCIÓN DE PROBLEMAS Si tiene problemas con esta unidad, revise la tabla a continuación antes de llamar a servicio. PROBLEMA: La unidad no enciende. CAUSA SOLUCIÓN La pila está baja/ Recargue la pila como descargada. se describe en la pág. 7. encendida. cómo encenderla. La unidad no está Sin sonido. Los ariculares no están conectados. El volumen está muy están corruptos. corruptos. reproductor. Los archivos WMA con DRM no se reproducen.
GUÍA DE RESOLUCIÓN DE PROBLEMAS (CONTINÚA) PROBLEMA: No funcionan los botones. CAUSA Desactive la función de Bloqueo Debe reiniciar la unidad Reinicie la unidad y/o está activada. o necesita actualizar el La unidad actúa erráticamente. SOLUCIÓN La función de Bloqueo firmware. como describe la pág. 22. actualice el firmware, ver página 68. Debe reiniciar la unidad Reinicie la unidad y/o firmware. página 68.
FORMATEAR EL REPRODUCTOR Formatear el reproductor ¡ADVERTENCIA! No formatee el reproductor a menos que deje de funcionar y se lo indique el personal de soporte técnico. 1. Utilice el cable USB para conectar el reproductor y la computadora. 2. Haga doble clic en Mi PC, luego haga clic con el botón derecho del mouse en “MTP Player” o “Media Player” y clic con el botón izquierdo en “Formatear” (Format). 3. Para “MTP Player” o “Media Player”, en la ventana “Formatear”, haga clic en OK para confirmar.
REINICIAR LA UNIDAD Si la unidad actúa erráticamente, reinicie la unidad insertando un pequeño objeto (como un clip para papel) en el botón de Reinicio. Con respecto al botón de Reinicio, vea la página 6 en cuanto a la ubicación. ACTUALIZAR EL SOFTWARE DEL FABRICANTE Visite nuestro sitio web en www.memorexelectronics.com para revisar si existe una versión más nueva del firmware. NOTA IMPORTANTE: Antes de actualizar el firmware, respalde todos sus archivos en su computadora.
Audio ESPECIFICACIONES Rango de frecuencia: Salida para Auriculares: Relación Señal/Ruido: Formato de Archivo Compatible MP3: WMA: WAV: Imagen: Libro electrónico (Ebook) : AVI (MPEG4) WMV9 Sintonizador de FM Rango de frecuencia de FM: Antena: General 20Hz-20KHz 9mW, 32 ohm (Vol Máx.) 90dB (MP3) 54dB (Sintonizador) MPEG 1/2/2.5 Layer 3 con una tasa de transferencia de 32-320 kbps Windows Media Audio (archivo WMA con DRM 10) con una tasa de transferencia de 48-192 kbps Hasta 44.1kHz). baseline JPEGs.
PARA OBTENER LA ACTUALIZACIÓN DEL FIRMWARE, VISITE NUESTRO SITIO WEB EN WWW.MEMOREXELECTRONICS.COM PARA REVISAR SI HAY UN FIRMWARE NUEVO DISPONIBLE. PARA ASISTENCIA ADICIONAL SOBRE LA CONFIGURACIÓN O EL FUNCIONAMIENTO, INGRESE EN: WWW.MEMOREXELECTRONICS.COM O COMUNÍQUESE CON ATENCIÓN AL CLIENTE: Si llama desde EE.UU. marque 1-800-919-3647. Si llama desde México marque 001-866-580-8316.
Job # MMP9008 manual cover Colors: 1-color print Pantone 533c 4.75” (120.6mm) wide FO LD 4.75” (120.6mm) high 8GB www.memorexelectronics.com Imation Electronic Products, A Division of Imation Enterprises Corp. Weston, FL Printed in China / Impreso en China MMP9008 Please read these instructions completely, before operating this product. Memorex, el logotipo de Memorex y la frase "Is it live or is it Memorex?" FO LD Por favor lea toda las instruciones antes de tratar de usar este producto.