Operation Manual

ManualsBrandsMELICONI ManualsRemote ControlsGumbody Universal 5-500

USING THE KEYS AND FUNCTIONS

The functions described below are only available

if they are already foreseen by your TV.

Keep this booklet in case you ever need to consult us in the future.

Thanks to the enclosed CD and to the on-line guide on the site www.meliconi.com/guide

it is even easier and faster to programme the remote control and discover

all the potential offered by the UNIVERSAL 5-500.

PREPARE FOR USE

Read these instructions carefully before programming your remote control!

Thanks to its large database and numerous functions the UNIVERSAL 5-500 remote control is ideal for

replacing up to 5 remote controls of any brands for TV - VCR (

Video Recorder

) - DVD - SAT - TER (

Digital

Terrestrial

). Its ergonomic form and casing in soft rubber make it easy to grip and protect it against falls and

bumps.

Thank you for choosing a MELICONI remote control.

UNIVERSAL 5-500

Keys for selecting which appliance

you want to use.

They light up whenever a command

is sent to the selected appliance.

Teletext keys

ON/OFF key to turn the selected

appliance on and off

Keys that the user can customize

to memorize and access

additional commands

Confirm key

To move around within

the MENU or to control

the BRIGHTNESS/COLOUR

VCR/DVD function keys:

RECORD - PAUSE - STOP - PLAY

or fastext functions

Specific area for SET TOP BOX

To select the next (P+) or

previous (P-) channel or programme

Control the volume using

–

MUTE

turns the volume on and off

FORWARD / REWIND

functions for VCR and DVD

Number keys

To select an external input terminal

Summary of content (5 pages)

PAGE 1
GB UNIVERSAL 5-500 Thank you for choosing a MELICONI remote control. Thanks to its large database and numerous functions the UNIVERSAL 5-500 remote control is ideal for replacing up to 5 remote controls of any brands for TV - VCR (Video Recorder) - DVD - SAT - TER (Digital Terrestrial). Its ergonomic form and casing in soft rubber make it easy to grip and protect it against falls and bumps. Keep this booklet in case you ever need to consult us in the future.
PAGE 2
FITTING THE BATTERIES Before programming and using the remote control, fit the batteries. The remote control requires 2 new AAA/LR03 batteries. Insert the batteries as shown: • Change the batteries if the light indicator starts to flash during use. The batteries are low. • Make a note of the codes for your appliances on the adhesive label inside the battery cover in case you have to reprogramme your remote control.
PAGE 3
N.B. THE LIGHT INDICATOR STOPS FLASHING. The remote control exits programming mode and the light indicator stops flashing: • if no keys are pressed for 14 seconds • if an invalid brand code is entered • if a key other than ON/OFF or PLAY is accidentally pressed • if the end of the code search list has been reached. In this case consult the enclosed CD or the site www.meliconi.
PAGE 4
CURRENT CODE DISPLAY To find out the code of your remote control, follow this procedure: 1. Hold down the selection key of the appliance whose code you want to know for 5 seconds. or or or or 5 SEC. 2. When the key is released it will start to flash; press and release the 1-/-- key within 8 seconds. ...................................................... = 1 3. After a few seconds, the light indicator communicates the code you are looking for by flashing the four numbers separately.
PAGE 5
PR OBLEM SOLVING PROBLEM The appliance does not respond and the TV VCR - DVD - SAT - TER selection keys do not light up when a key is pressed. SOLUTION Try some of the other frequently-used keys. If the problem persists, check that the batteries are fitted correctly. If necessary, replace them with 2 new 1.5 V AAA/LR03 batteries. The appliance does not respond but the selection keys do light up.