MOTOROLA PIP11 DIGITAL AUDIO BABY MONITOR For: PIP11 User Guide
Safety instructions WARNING Strangulation Hazard. Children have STRANGLED in cords. Keep this cord out of the reach of children (more than 1 metre away). Never use extension cords with AC Adaptors. Only use the AC Adaptors provided.
Baby monitor setup and use: • Determine a location for the baby unit that will allow you to hear your baby in his/her cot. • Place the baby unit on a flat surface, such as a dresser, bureau, or shelf or mount the unit to a wall securely using the keyhole slots under the stand. • NEVER place the baby unit or cords within the cot.
Welcome... to your new Motorola PIP11 Audio Baby Monitor! • Secure, interference free reception and high-quality sound. • Long range up to 160 feet indoors and 1000 feet outdoors. • Bright backlit inverse display with 12 language options. • Two-way talk back between the baby and parent units. • Temperature sensor, with high and low alarms. • 5 lullabies, night light, volume control and microphone with high sensitivity. • Battery powered portable parent unit. • Expandable up to 2 parent units.
This User Guide provides you with all the information you need to get the most from your digital audio baby monitor. Read the instructions carefully, and be aware that this digital audio baby monitor is only intended as an aid. It is not a substitute for responsible and proper adult supervision. Before you use the digital audio baby monitor, set up the parent and baby units. Follow the simple instructions in ‘Getting started’, on the next few pages. Important Only use the power adaptors supplied.
1. 2. 3. Getting started.................................................................... 8 Getting to know your baby monitor..........................12 Using the digital audio baby monitor........................15 3.1 3.2 3.3 3.4 3.5 3.6 3.7 3.8 3.9 3.10 3.11 3.12 4. 5. 6. 6 Turn the baby unit on / off............................................................................15 Turn the parent unit on / off.........................................................................
< This page has been intentionally left blank > 7
1. Getting started Location Important Do not place your PIP11 in the bathroom or other humid areas. Place your units within reach of the AC power outlet and wall socket. The socket-outlet should be installed near the equipment and should be easily accessible. Range of parent and baby units Make sure the distance between the parent unit and baby unit is less than 300 metres. Setting up Important The baby unit must be plugged into the AC power at all times.
Connecting the baby unit 1. Plug the DC plug of the power adaptor into the DC jack on the rear of the baby unit and plug the other end of the AC adaptor into the AC power outlet. 2. Switch on the AC power. Installing batteries into the parent unit 1. Lift up the battery cover to remove it from the the parent unit.
2. Insert the rechargeable Ni-MH battery cells supplied. Note the ’+’ and ’-’ markings inside the battery compartment and insert in the correct direction. 3. Slide the battery cover back into place. Important Warning! Use only the approved rechargeable Ni-MH battery cells (2 x AAA Ni-MH rechargeable batteries) supplied with your PIP11. Connecting and charging the parent unit You will need to carry out this process for the single or dual parent units. 1.
Battery low warning If is shown on the display, recharge the parent unit before using it again. When charging, will scroll on the display. Battery performance In ideal conditions, fully charged batteries should give up to 10 hours usage time or up to 15 hours standby time on a single charge. Note that new batteries do not reach their full capacity until they have been put to normal use for several days.
2. Getting to know your baby monitor Overview of your baby unit Front view Back view A E D B F C G A Night light (amber LED) B Microphone C Power button Press and hold to turn the baby unit on or off. D Power / Linking LED indicator Turns on when the parent unit is powered on and linked to the baby unit. Flashes when the parent and baby units are not linked with each other.
Overview of your parent unit Front view Back view D J E A B F G H C I K A Microphone B Menu / OK Enter the main menu. Confirm menu options. C Power jack D Display E Power / Linking LED indicator Turns on when the parent unit is powered on and linked to the baby unit. Flashes when the parent and baby units are not linked with each other. F Scroll up / Volume up Press to increase the speaker volume or scroll up in screen. G Power button Press and hold to turn the parent unit on or off.
Screen display Display icons Turns on when the parent unit is connected and within range. Flashes when the parent unit is not connected and out of range. Turns on when listening to lullabies. Turns on when the sound alert is activated. Flashes when the sound alert is triggered. Turns on when the speaker volume is off. Turns on when the night light is on. Indicates the current battery level.
3. Using the digital audio baby monitor 3.1 Turn the baby unit on / off • Press and hold on the baby unit to turn it on. The power / linking LED indicator will turn on. • Press and hold on the baby unit again to turn it off. The power / linking LED indicator will turn off. 3.2 Turn the parent unit on / off • Press and hold on the parent unit to turn it on. The power / linking LED indicator will turn on. • Press and hold on the parent unit again to turn it off.
3.5.3 1. Select a lullaby Press MENU / OK on the parent unit. 2. LULLABY is displayed. Press MENU / OK. 3. Scroll the down key to select CHOOSE, then press MENU / OK. 4. Select PLAY ALL or scroll the up or down key to select from 5 lullabies, then press MENU / OK to confirm. 3.5.4 1. Set the playback timer Press MENU / OK on the parent unit. 2. LULLABY is displayed. Press MENU / OK. 3. Scroll the down key to select TIMER, then press MENU / OK. 4.
4. Select HIGH TEMP / LOW TEMP, then press MENU / OK to confirm. 5. Press up or down key to set the high or low temperature range, then press MENU / OK to confirm. Note The temperature range can be set from 14°C (57°F) to 39°C (102°F). 3.9 Turn the key tone on or off When you confirm a selection, you will hear a beep. You can switch the beep on or off. 1. Press MENU / OK on the parent unit. 2. Scroll the down key to select KEY TONE, then press MENU / OK. 3.
4. Help The power / linking LED Indicator on the parent unit does not turn on. • Check whether the parent unit is powered on. • Check whether the supplied batteries are correctly installed and not drained. • Connecting the parent unit to the mains power to recharge it. The power / linking LED indicator on the parent unit flashes and ‘NOT LINKED’ displayed on the screen. • The parent unit and the baby unit may be out of range with each other.
5. Technical Specifications RF frequency bands 1881.792MHz to 1897.344MHz (Europe) 1921.536MHz to 1928.448MHz (USA & Canada) RF transmission power < 0.25 W (EU version) Line of sight operating range between the baby and parent units 300 meters Power adaptor for the baby and parent units DC 6.0V, 0.4A with DC round plug from: Dongguan Everest Industrial Co., Ltd. Address: No.2, Min Xing 1st Road, Shang Jiao, Chang An Town, Dong Guan, GuangDong, China.
Battery life 10 hours (maximum) ECO friendly Voice-activation (VOX feature) • enters monitor mode when sound level is higher than 60dBAspl. • enters standby mode when sound level is lower than 60dBAspl. Parent unit Note Specifications are subject to change without prior notice.
6. General information Cleaning and care Important Always switch off and disconnect the power adaptor before cleaning your Digital Audio Baby Monitor. • Clean your digital audio baby monitor with a slightly damp cloth or with an anti-static cloth. Never use cleaning agents or abrasive solvents. • Do not clean any part of the digital audio baby monitor with thinners or other solvents and chemicals - this may cause permanent damage to the product which is not covered by the warranty.
What will MZGW do? MZGW or its authorized distributor at its option and within a commercially reasonable time, will at no charge repair or replace any Products or Accessories that do not conform to this limited warranty. We may use functionally equivalent reconditioned / refurbished / pre-owned or new Products, Accessories or parts.
Exclusions Normal Wear and Tear. Periodic maintenance, repair and replacement of parts due to normal wear and tear are excluded from coverage. Batteries. Only batteries whose fully charged capacity falls below 80% of their rated capacity and batteries that leak are covered by this limited warranty. Abuse & Misuse. Defects or damage that result from: (a) improper operation, storage, misuse or abuse, accident or neglect, such as physical damage (cracks, scratches, etc.
How to Obtain Warranty Service or Other Information? To obtain service or information, please visit us at: motorolanursery.com/support You will receive instructions on how to ship the Products or Accessories at your expense and risk, to a MZGW Authorized Repair Center.
FCC and IC regulations FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Radiation Exposure Statement: The baby unit complies with FCC/ISEDC radiation exposure limits set forth for an uncontrolled environment. The baby unit should be installed and operated with minimum distance 20cm between the radiator& your body. The parent unit has been tested and comply with FCC and ISEDC SAR limits. Déclaration d'exposition aux radiations: L'unité bébé est conforme aux limites d'exposition aux rayonnements FCC / ISEDC établies pour un environnement non contrôlé.
< This page has been intentionally left blank >
Manufactured, distributed or sold by Meizhou Guo Wei Electronics Co. LTD., official licensee for this product. MOTOROLA and the Stylized M Logo are trademarks or registered trademarks of Motorola Trademark Holdings, LLC. and are used under license. All other trademarks are the property of their respective owners. © 2021 Motorola Mobility LLC. All rights reserved. Version 3.
