V5PF Setup Guide
Before You Begin Setup Please check that the following are true: • Your Android smartphone or tablet is compatible. (For a more information on compatible devices, visit wrensound.com/compatibility.) English Box Contents • Your WiFi access point or router broadcasts at 802.11g or 802.11n. (An 802.11b only router may be used, but it will stream to only one Play-Fi device.) AC Power Cord Mini USB Charging Cable • You know your wireless network (WiFi) name and password.
Connect AC power cord to power supply. Connections Connect power supply to power input on rear of speaker. The power indicator in the center of the power button will flash white for about 10 seconds, then turn off. Setup Button Used to enter various setup modes English Powering On Your Wren V5PF 3.5mm Aux Input Connects any audio source to your Wren V5PF via a 3.5mm audio cable Power Supply Input Connects to the power supply USB Charging Port Connect power supply to AC outlet. Press power button.
Standard WiFi setup using an Android smartphone or tablet Launch the Wren Play-Fi App. It will automatically detect any Wren V5PF speakers that are in WiFi Connect Mode. The Wren Play-Fi App will ask you to enter your WiFi network’s password (if required). English Connect to your network — Option A Standard WiFi Setup enables you to set up multiple Wren V5PF speakers at once. For best results, place your Wren V5PF speaker(s) near your router. You may move the speaker(s) after setup is complete.
The Wren Play-Fi App will ask you to name your speaker. Choose from preselected names or create your own by choosing “Custom Name” at the end of the name list. To listen to music, simply use the Wren Play-Fi App on your Android device to select the music you want to play. Setting Up Wren V5PF Speakers After Launching the App The Wren Play-Fi App looks for devices in Standard WiFi Setup Mode when it is launched.
Connect to your network — Option A English WiFi Protected Setup (WPS) using an Android smartphone or tablet WiFi Protected Setup (WPS) is a feature on some WiFi routers that allows the Wren V5PF speaker to automatically and securely connect without needing to enter a password. WPS is not a standard feature on all routers, and only one Wren V5PF speaker can be set up at a time. Check your router’s owner manual to see if WPS is a feature, or look for a button on your router marked with the WPS logo .
Using Play-Fi Once you have successfully set up your Wren V5PF speaker, you are ready to enjoy your music wirelessly. Simply launch the Wren Play-Fi App on your Android device. The App will verify the connection with all Play-Fi speakers on your network. It’s that simple. Select the speaker(s). Select your music. Choose a single speaker in one room, or link all your speakers for a whole-home listening experience.
Troubleshooting Tips Problem Possible Solutions I am unable to connect the Wren V5PF to my network. 1. Verify that your WiFi network is functioning. Power Powers on and off the speaker. White light indicates power is on. Amber light indicates volume is muted. Volume Adjustment Indicator Indicates volume being adjusted. English Speaker Controls 2. The WiFi signal may be weak or the Wren V5PF may be out of range of your WiFi network. Move the Wren V5PF closer to your network access point. 3.
Problem Possible Solutions The Wren Play-Fi App says “Play-Fi Devices Lost.” If you see this message, it could mean one or more things: Notes English Troubleshooting Tips (cont.) • The connection to your network is very weak • There is heavy network traffic. • You’ve moved out of your personal network’s coverage range. • You have lost your network connection. • You have connected to a network other than the one your Play-Fi device(s) are on.
18 19
Contact Information Wren Sound Systems | Customer Service/Technical Support Phone: 1-855-GET-WREN (438-9736) Email: support@wrensound.com Web: wrensound.com/support V5PF.SG.V1.R0.01.15.13.