Installation Instructions

Table Of Contents

"BT KEYBOARD"

2.4G connection method:

install battery，Set the power switch to ON，

Press the CONNECT button on the keyboard，

The icon will ﬂash blue after pressing the “connect” button

1. Then press Fn + 3， and then Plug in the receiver,

until a 2.4G connection is established, the blue icon disappears when connected

2.4G dongle description

1.The YC1063 is a very low power,

high performance and highly integrated 2.4G Proprietary solution,

designed for operation over the 2400MHz to 2483.5Mhz ISM frequency band..

2.YC1063 is manufactured using advanced 55nm CMOS low leakage process,

which offers highest integration,lowest power consumption,

lowest leakage current and reduced BOM cost while simplifying the overall system design.

PAGE 1
"BT KEYBOARD" "BT KEYBOARD" 2.4G dongle description 1.The YC1063 is a very low power, high performance and highly integrated 2.4G Proprietary solution, designed for operation over the 2400MHz to 2483.5Mhz ISM frequency band.. 2.YC1063 is manufactured using advanced 55nm CMOS low leakage process, which offers highest integration,lowest power consumption, lowest leakage current and reduced BOM cost while simplifying the overall system design. 2.
PAGE 2
FCC Caution. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.