Operation Manual

ManualsBrandsMegasat ManualsAntennaT3 - DVB-T

Model NO.: MV-9011C (with MP-001)

OMNI-DIRECTIONAL MARINE & CARAVAN TV ANTENNA

HDTV

Compatible

ATSC

Com pati ble

Frequency range:VHF:47-230MHz

UHF:470-862MHz

Receiving range: FM/VHF/UHF

Gain: 30dB

Noise figure: 3dB

Max. output level: 110dBµV

Impedance: 75Ω

Connector: F-connectors

Power supply: DC 12V

1.Antenna x 1

2.Rubber ring x 1

3.Aluminum Mountx 1

4.Water-proof washer x 1

5.Roof Gasket x 1

6.Screw sets x 4

Hexagon Nuts x 4

Spring washer x 4

Antenna Gasket x 4

7. Carriage Bolts x 4

8. Power supply MP-001 kits

Technical Specification

Included in Packaging:

Installation Guide:

STEP 1. Choose Location

Antenna & power supply location determines wher

e and how you run cables, so please install under the following instructions:

Choose a location outside the roof which allow easy connection to power supply and television. Make sure the location is flat and

have sufficient space. See Figure1.

12V AC/DC power adapter

Gain adjuster

Power supply with gain adjuster

DC 12V input wire kits

{

water-proof washer

roof

roof gasket

Figure 1

Outside view of roof Inside view of roof

Specially compatible with HDTV of various digital terrestrial signal

(DVB-T,ISDB-T,DMB-T/H,ATSC) and DAB/FM radios.

The antenna is surface-treated to withstand impacts from saltwater

and weather conditions

Build-in high gain and low noise amplifier, shielded for minimum

interference.

Waterproof housing design made of UV resistant, injection molded

ASA material with super durability.

Omnidirectional antennas receive VHF, UHF, and FM signal from every

point regardless of the direction you are travelling.

The best digital terrestrial TV reception solution for your boating and caravans

SMD Technology and micro-electronics makes the high quality amplifier, ensure the

excellent antenna performance.

Product features

Summary of content (6 pages)

PAGE 1
OMNI-DIRECTIONAL MARINE & CARAVAN TV ANTENNA Model NO.: MV-9011C (with MP-001) HDTV Compatible ATSC Compatible Product features Specially compatible with HDTV of various digital terrestrial signal (DVB-T,ISDB-T,DMB-T/H,ATSC) and DAB/FM radios. The antenna is surface-treated to withstand impacts from saltwater and weather conditions Build-in high gain and low noise amplifier, shielded for minimum 1 interference.
PAGE 2
STEP 2. Drill Holes 1)Place the roof gasket(#5) in the chosen location and mark 1 center hole and 4 screw holes on the roof.See Figure2 2)Remove STEP 2. Drill Holes the roof gasket(#5) and drill the aboved-mentioned 5 holes accordingly on the roof STEP Holes STEP 2. 2. Drill Drill Holes 1)Place the and mark 1 center hole and 4 screw holes onFigure the roof.See Figure2 Figure 2 roof gasket(#5) in the chosen location Figure 3 4 1)Place roof gasket(#5) in the location and hole holes on the roof.
PAGE 3
able oaxial cable(Female F connector) to the coaxial cable(Male Fconnector) of power supply unit. See Figure11 Figure 11 antenna cable nna coaxial cable(Female F connector) to the coaxial cable(Male Fconnector) of power supply unit. See Figure11 Figure 11 ntenna cable na coaxial cable(Female F connector) to the coaxial cable(Male Fconnector) of power supply unit. See Figure11 Figure 11 P-001 kits DC power adapter. See Figure 12. Antenna to power supply input.
PAGE 4
OMNI-DIRECTIONAL MARINE & CARAVAN TV ANTENNA Model NO.: MV-9011C (with MP-001) HDTV Compatible ATSC Compatible Product features Specially compatible with HDTV of various digital terrestrial signal (DVB-T,ISDB-T,DMB-T/H,ATSC) and DAB/FM radios. The antenna is surface-treated to withstand impacts from saltwater and weather conditions Build-in high gain and low noise amplifier, shielded for minimum 1 interference.
PAGE 5
STEP 2. Drill Holes 1)Place the roof gasket(#5) in the chosen location and mark 1 center hole and 4 screw holes on the roof.See Figure2 2)Remove STEP 2. Drill Holes the roof gasket(#5) and drill the aboved-mentioned 5 holes accordingly on the roof STEP 2. 2. Drill Drill Holes Holes STEP 1)Place and mark 1 center hole and 4 screw holes onFigure the roof.
PAGE 6
able oaxial cable(Female F connector) to the coaxial cable(Male Fconnector) of power supply unit. See Figure11 Figure 11 ct the antenna cable e antenna coaxial cable(Female F connector) to the coaxial cable(Male Fconnector) of power supply unit. See Figure11 the antenna cable Figure 11 F connector) to the coaxial cable(Male Fconnector) of power supply unit. See Figure11 antenna coaxial cable(Female Figure 11 P-001 kits DC power adapter. See Figure 12. Antenna to power supply input.