Bedienungsanleitung User Manual Digitaler HD Satelliten Receiver Megasat HD900 Stand: Dezember 2011 V1.
PID(Packet Identifier) A set of numbers that identifies transport stream packets containing data from a single data stream. Polarization Polarizations allows several programmers to be fit into the same frequency band. The signals from a satellite are transmitted either with linear (vertical or horizontal) polarizations or circular (right or left) polarizations. QPSK(Quaternary Phase Shift Keying) Phase-shift keying in which four different phase angles are used.
INHALT Allgemeine Informationen……………………………………………. 4 Haupteigenschaften........................................................................... 5 Sicherheitshinweise........................................................................... 6 Lieferumfang...................................................................................... 5 Vorderansicht des Receivers.............................................................7 Rückansicht des Receivers…………………………………………….. 7 Fernbedienung................
5.3 Glossary 5.2 Technical Specification Antenna Tuner & Demodulator A device collects and radiates electromagnetic waves. Includes a satellite dish and broadband antenna. DiSEqC DiSEqC(Digital Satellite Equipment Control)system, it is a communication bus between satellite receivers and peripheral equipment using the only existing coaxial cable.
Hauptfunktionen MPEG2 SD, MPEG2 HD, H.264AVC SD, H.264/AVC HD, MP4 USB Schnittstelle (Mediaplayer Unterstützung) DV-OUT HDTV (HDMI) 480i/p, 576i/p, 720p, 1080i, 1080p mit HDCP Scart-Anschluss, Video und L/R Audio Chinch Digitaler Audioausgang SPDIF Coaxial SCPC und MCPC empfangen von C/Ku-Band Satelliten Automatische Umschaltung PAL/NTSC 6000 TV- und Radiokanäle mit 4 Favoritengruppen Hochauflösendes mehrsprachiges OSD Menü 7-Tage Elektronischer Programmführer - EPG DiSEqC 1.0/1.1/1.2/1.
5. Additional Information Channel List-OK 5.1 Trouble Shooting In viewing mode press OK button and you will You might meet abnormal working of this STB with various reasons. Check the following which may help you. get this window. Press / to view channel in different types, ALL, FTA, Scrambled and Problem Possible causes What to do MPEG4/H264.
Fernbedienung 1.TV/R: Umschalten zwischen TV und RADIO Modus. 2. POWER: 3. MUTE: Receiver An oder Aus. Stummschaltung 4. HDMI: Ändert die HDMI Auflösung 5. FORMAT: Einstellung Bildformat 4:3 & 16:9 6. TIME: Timer Einstellung. 7. SLEEP: Zeiteinstellung bis zur Abschaltung 8. NUMMER TASTEN (0~9): Direkte Eingabe der Nummern 9: SUB: Untertitel 10. EPG (Elektronisch Programmzeitschrift): 12. FAV: Umschalten der Favoriten Liste. 13. TXT: Videotext 14. RECALL: Wechselt zum letzten Programm. 15.
Anschluss LNB Sat-Spiegel 4.6 Other Useful Information This will guide you on how to use general info while watching TV program or listening Radio program with some buttons on your RCU. Receiver mit der Außeneinheit (LNB) verbinden. FAV In viewing mode, you can get the favorite (1) Verbinden Sie die Koaxialleitung über die F-Anschlüssen mit dem Receiver und dem LNB. (Receiver LNB IN). channel group by pressing FAV, press FAV button to change category.
4.5 EXPANSION Hauptmenü Games Some classic games which will give your some Schalten Sie den Megasat am Netzschalter an und drücken Sie die Menü Taste. Das Hauptmenü erscheint und Sie können mit den Grundeinstellungen beginnen.
Installation Hinzufügen Wählen Sie mit den Curser Tasten „Hinzufügen“ um einen neuen Satelliten hinzuzufügen. Geben Sie die Daten des neuen Satelliten ein und bestätigen diese mit OK. Der neue Satellit wird der Satellitenlist hinzugefügt. Satelliten Pos. verschieben Wählen Sie mit den Curser Tasten „Bewegen“ um die Position des gewählten Satelliten zu verschieben und an die gewünschte Position einfügen.
Favorites Press MENU button, here you can sort the Installation channels in different type, such as news, movies, music, sports, Using the UP/DOWN keys select any sort press OK, then you can set the channels FAV type by pressing FAV key. NOTE: Radio favors operation similar to the above. UniCable Systeme: Unter dem Menüpunkt LNB Frequenz, können Sie die Einstellungen für Einkabelsysteme (UniCable) vornehmen. Mit den Tasten können Sie verschiedene Einstellungen für das LNB wählen.
22KHz Hier können Sie die Standardeinstellung der 22KHz Schaltung ändern. Als Standard ist die Option „Auto“ gewählt. 4.2 EDIT CHANNEL In this menu you can set program edit like DiSEqC Type DiSEqC1.0 oder 1.1 Betreiben Sie den Receiver an einem DiSEqC Schalter oder an einem Multischalter mit DiSEqC müssen Sie die DiSEqC Einstellung anpassen. Für den Standardbetrieb mit einem Satelliten ist keine Einstellung notwendig.
F: Channel search In this menu, you can select scan mode like TP/blind/network scan, you also can select all Channels & FTA Channels by setting the search Programme verwalten Programme verwalten Hier können Sie die Senderlisten bearbeiten.
Favoriten Wählen Sie Favoriten bearbeiten um Ihre Favoriten Gruppen zu erstellen. Es sind 4 Gruppen voreingestellt, die Sie beliebig umbenennen können. Wählen Sie die gewünschte Gruppe und markieren Sie die Sender zur Gruppe durch drücken der OK Taste. Hinweis: Das bearbeiten der Radiosender ist identisch mit dem TV bearbeiten. B: LNB Type and LNB Power Here you need to check the LNB frequency according to your antenna, set the correct frequency or define yourself, and keep LNB power to be 13/18V.
Add Add satellite by using the Red key. Here you can input new Satellite angle, Satellite Direction (east, west), Band (ku,c). OK to confirm the setting and this new satellite will be added to the end of the Satellite list. Edit Select the satellite then press green button. You OSD Einstellung Im Menü OSD Einstellung können Sie mit Hilfe der Cursor Tasten die gewünschten Optionen: Menü Transparenz – Videotext Transparenz – Bildschirm Auflösung – TV Typ – TV Format – OSD Anzeigezeit ändern.
Erweitert 4. Installation and Operation After connecting the receiver to other required equipment, turn on the receiver, there Im Hauptmenü Erweitert haben Sie folgende Untermenüs. Spiele – USB Explorer – Wirless Einstellung – IP Einstellung – FTP Download - Wetter should be no channel information available at first. You need to follow the procedure to Spiele Im Menü Spiele haben Sie 8 Spiele zur Auswahl. Main Menu USB Explorer Im Menü USB Explorer können Sie Ihre angeschlossenen USB Geräte verwalten.
3. Installation and Connection Tasten Erklärung The following diagram shows you how to connect the HD receiver, TV, LNB and other Info Drücken Sie die INFO-Taste, um das Info-Fenster anzuzeigen. Drücken Sie erneut die Info-Taste und es werden technische Informationen zum Kanal Angezeigt. equipment, please read this first if you are not sure about the connection, and it will guide you to the correct connection. 3.
OK/List 1. Drücken Sie die OK-Taste, während Sie fernsehen oder Radio anhören und es wird die TV/Radio-Kanal Liste angezeigt. 2. Wählen Sie mit den Tasten PR+, PR- den Kanal aus und bestätigen Sie Ihre Wahl mit der OK-Taste. 3. Drücken Sie die MENÜ-Taste oder EXIT-Taste, um das Fenster zu schließen. Audio-Modus 1. Drücken Sie die rote Audio Taste, um das Fenster Audio-Modus aufzurufen. 2. Wählen Sie mit den Tasten zwischen Links, Rechts, Stereo oder Mono aus. 3.
2.3 Remote Control Unit 1.TV/R: Switch between TV and RADIO. Fehlersuche 2. POWER: Bei Problemen Prüfen Sie bitte folgende Fehlerhinweise. 3. MUTE: Switch the receiver on or off. Turn the sound On/Off. 4. HDMI: Switch the TV type. Problem Mögliche Ursachen Maßnahmen LED brennt nicht. Stromkabel nicht eingesteckt; Stromkabel überprüfen 5. FORMAT: Switch 4:3 & 16:9 Screen Formats. Netzschalter Aus; Netzschalter Ein 6. TIME: Setup event timer.
Technische Spezifikation 2.2 Rear Panel Tuner & Demodulator Demodulation Frequenzbereich Signal Level RF Impedanz LNB LNB Tone Switch DiSEqC Kontrolle Symbol Rate FEC Decode & 8PSK QPSK, 8PSK 950 MHz to 2150 MHz -25 to -65 dBm 75Ω Ohms unbalanced 13V/18V/OFF, max = 500mA 22KHz+/-2KHz, 0.6Vpp+/-0.2V Version DiSEq C 1.0/1.1/1.2/1.3(USALS)Compatible, Tone burst A/B 2.
2. Basic Function Table of Contents 2.1 Front Panel Safety Precaution ........................................................................................................2 1. Reference 1.1 General Features ...................................................................................................3 1.2 Accessories ............................................................................................................4 2. Basic Function 2.1 Front Panel ....................................
1. Reference Safety Precaution This STB has been designed and manufactured to satisfy the international safety standards. Please read the following safety precautions carefully before operating this receiver. 1.1 General Features DVB-S/DVB-S2 Satellite Compliant (MPEG-II/ MPEG-IV/ H.264). DiSEqC 1.0, 1.1, 1.2 & 1.3 (USALS) Compatible. Main Supply: Before operating, please check the units operating voltage is 100~240V AC 50/60Hz.