Product details DecaMove & Dongle Power, charge and state indicator Button USB C port for Charging and debuging Clip Antenna Power and state indicator
Setup 1. Download and install deca hub Requirements: - Steam VR - Windows 10 Download and Install the DecaHub installer from this link: https://www.deca.net/decamove/setup Open the DecaHub software from your Windows Start menu Setup 3. Pairing Turn on the DecaMove by pressing the button for 2 seconds. DecaMove LED will change from orange (not connected) to blue when it successfully connects to dongle. 2.
Setup 5. Fit The DecaMove can be placed anywhere along the waist and hip area but we recommend placing it on the sides so that it doesn?t interfere with crouching down or bending forward. 6. Launch games from decahub Launch Tab In order to support many games without the need for the game developer to install the devices?SDK, it?s important that you launch games from the DecaHub. Go to the Home tab and click the game you want to play (e.g.
Indicator states 1. DecaMove OFF: LED is off Indicator states 5. DecaMove Charging complete: LED is white Dongle OFF: LED is off 2. DecaMove ON but not connected to dongle: LED is Orange Dongle connected to PC but not connected to DecaMove: - LED is steady red (com port open) - LED blinks red (com port closed) 3. DecaMove is turned on and connected to dongle: LED is blue Dongle connected to PC and DecaMove: - LED is steady blue (com port open) - LED blinks blue (com port closed) 4.
Firmware update Firmware update 1. Connect Deca move to your PC using the provided USB C cable and press button for 2 seconds until LED starts to pulse blue. 3. If firmware update is available click on "Update firmware" to program the Decamove 4. Once firmware update is successfull DecaMove LED will turn off , you can now disconnec the device from the PC and turn it on pulses 2. Click on the settings icon in deca hub and click on "Check update" in the firmware update section.
Problems and troublshooting 1. DecaMove is not connecting - If the DecaMove dongle LED is solid red and the DecaMove LED is solid yellow it means that the dongle BLE port memory wasn't clear for some sort of reason (can happen with multiple DecaMoves in the same environment). Fix: Unplug the dongle, wait 3 seconds and plug it again.
Megadodo Games Co., Ltd. www.deca.net For more questions or suggestions, please reach us at: https://discord.com/invite/d7YG7qD https://twitter.com/DecaGear Megadodo Games Co., Ltd. No. 24 Sukhumvit Soi 43, Khlong Tan Nuea, Wattahana, Bangkok, 10110 Thailand.
