mTray T8 User Manual Rev. 2.0 Updated on 3June, 2014 mTray T8 User Manual Rev. 2.0 Model: mTray T8 Technical Contacts and Enquiry: info@myndar.com Website: www.myndar.com (This user manual / product specification is subjected to be changed without prior notice) P.
mTray T8 User Manual Rev. 2.0 Updated on 3June, 2014 Table of Content FCC statement..................................................................................................... 3 CE statement ....................................................................................................... 3 Chapter 1 Introduction of mHand T8 ................................................................. 4 1.1 Overview of mTray T8 ...................................................................4 1.
mTray T8 User Manual Rev. 2.0 Updated on 3June, 2014 FCC statement FCC NOTICE: To comply with FCC part 15 rules in the United States, the system must be professionally installed to ensure compliance with the Part 15 certification. It is the responsibility of the operator and professional installer to ensure that only certified systems are deployed in the United States. The use of the system in any other combination (such as co-located antennas transmitting the same information) is expressly forbidden.
mTray T8 User Manual Rev. 2.0 Updated on 3June, 2014 ‘ Chapter 1 Introduction of mTray T8 1.1 Overview of mTray T8: mTray T8 is an UHF EPC C1G2 mobile RFID handheld with Bluetooth technology, the plug & play Bluetooth connectivity increases the flexible on the RFID sale through Bluetooth enabled mobile device.. • The mTray T8 Intelligent RFID Reader supports protocols, UHF CLASS 1 GEN2 EPC C1G2/ISO 18000-6C, 917-928 MHz RFID frequency band in United States. Technical Contacts and Enquiry: info@myndar.
mTray T8 User Manual Rev. 2.0 Updated on 3June, 2014 1.2 Ports Description Battery Charging Port/ USB port Bottom of device (1) Battery charging Port/ USB port Input port of the mTray T8: Items no. Name Description 1 USB Charging battery Technical Contacts and Enquiry: info@myndar.com Website: www.myndar.com (This user manual / product specification is subjected to be changed without prior notice) P.
mTray T8 User Manual Rev. 2.0 Updated on 3June, 2014 1.3 Buttons in mTray T8 Power ON Button Battery Removable Key Bottom of device (2) Power ON Button Technical Contacts and Enquiry: info@myndar.com Website: www.myndar.com (This user manual / product specification is subjected to be changed without prior notice) P.
mTray T8 User Manual Rev. 2.0 Updated on 3June, 2014 (3) Battery Removable Key Items no. Name Description 2 Power ON Button Press and hold to switch the device ON 3 Battery Removable Key Pull left and hold to unlock battery Technical Contacts and Enquiry: info@myndar.com Website: www.myndar.com (This user manual / product specification is subjected to be changed without prior notice) P.
mTray T8 User Manual Rev. 2.0 Updated on 3June, 2014 1.4 Indicators LEDs in mTray T8 (4) White LED indicates the device is readied but Bluetooth is not connected (5) Blue LED indicates Bluetooth is connected Technical Contacts and Enquiry: info@myndar.com Website: www.myndar.com (This user manual / product specification is subjected to be changed without prior notice) P.
mTray T8 User Manual Rev. 2.0 Updated on 3June, 2014 (6) Red LED indicates the battery is charging (7) Green LED indicates the battery is charged Technical Contacts and Enquiry: info@myndar.com Website: www.myndar.com (This user manual / product specification is subjected to be changed without prior notice) P.
mTray T8 User Manual Rev. 2.0 Updated on 3June, 2014 (8) Red LED indicates floating LED The mTray T8 has different LEDs to indicate the reader status. Items no. Name Description 4 White LED Bluetooth is ready but not connected 5 Blue LED (BT ON) Bluetooth is connected 6 Red LED Battery charging 7 Green LED Battery charged Full 8 Red LED Floating LED – item were out of tray Technical Contacts and Enquiry: info@myndar.com Website: www.myndar.
mTray T8 User Manual Rev. 2.0 Updated on 3June, 2014 1.5 Indicators E-ink Panel in mTray T8 (10) ‘Floating’ Signal (9) ‘On Tray’ Signal E-ink panel shows the results of the data detected. The readings of mTray E-ink Panel indicate the detected results. Items no. Name Description 9 ‘On Tray’ Signal Number of item on tray 10 ‘Floating’ Signal Number of item out of tray Technical Contacts and Enquiry: info@myndar.com Website: www.myndar.
mTray T8 User Manual Rev. 2.0 Updated on 3June, 2014 1.6 Specification: Item Specification Input 1 power key button USB port indicator Red LED stand for charging Green LED stand for fully charged White LED stand for BT on but not connected Blue LED stand for BT on and connected Red LED for floating item Connectivity Bluetooth module with UART interface Battery 5000mAh standard battery Charger Bluetooth Talk/ Standby time Charging time Operation temp. Storage temp.
mTray T8 User Manual Rev. 2.0 Updated on 3June, 2014 Chapter 2 Installation of mTray T8 2.1 Start-up Procedure of mTray T8 This section explains how to set-up mTray T8 and connect the mTray T8 to your computer: I. Power On the mTray by pressed and hold the Power On button for 5second. Power On Button II. White LED lights up, which indicates the Bluetooth is readied to be connected. Technical Contacts and Enquiry: info@myndar.com Website: www.myndar.
mTray T8 User Manual Rev. 2.0 Updated on 3June, 2014 III. Search and Pair the Bluetooth with your computer: • In startup manual, choose “Control Panel”. • In “Control Panel”, choose “Devices and Printers” • In “Devices and Printers”, press the button “add a device”, then select mTray BT address to pair. In general, the mTray BT name is called “ T8_XXXXXXXXXXXXXX” IV.
mTray T8 User Manual Rev. 2.0 Updated on 3June, 2014 VI. After BT is connected, then run the program or apps like “UniversalReaderAssistant” in the computer to control the mTray operation. VII. Set the “COM” number in the program which is generated after paired. The “COM” number can be found in the device manager in the computer. VIII. Run the program. Technical Contacts and Enquiry: info@myndar.com Website: www.myndar.
mTray T8 User Manual Rev. 2.0 Updated on 3June, 2014 2.2 Environmental Requirements The next table includes environmental requirements for the mTray T8. Choose a location that meets these requirements. Description Minimum Maximum Operating temperature 0ºC 40ºC Storage temperature -20ºC 60ºC Humidity (non-condensing) 20% 90% Technical Contacts and Enquiry: info@myndar.com Website: www.myndar.com (This user manual / product specification is subjected to be changed without prior notice) P.
mTray T8 User Manual Rev. 2.0 Updated on 3June, 2014 2.3 Caution Danger of Electric Shock • Disconnect the device from the electric supply before cleaning or performing maintenance on the machine. • • Keep this device dry. Turn off or unplug the machine when it is not in use. Please read the information contained within this user manual prior to attempting installation and operation of the RFID Reader.
mTray T8 User Manual Rev. 2.0 Updated on 3June, 2014 Chapter 3 Demonstration of RFID Applications 3.1 Creating RFID Application with mTray T8 mTray T8 is an intelligent reader and compliance with EPC global C1G2/ISO 18000-6C, Users can develop own UHF RFID application on this platform. 3.1.1 Delivering Application to mTray T8 When the user wants to deliver applications to the mTray T8, they just simply install the program in Windows and Linux platform. 3.1.
mTray T8 User Manual Rev. 2.0 Updated on 3June, 2014 Chapter 4 Regulatory Information 4.1 Federal Communications Commission (FCC) Compliance 4.1 Federal Communications Commission (FCC) Compliance This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
mTray T8 User Manual Rev. 2.0 Updated on 3June, 2014 4.2 CE Compliance This device has been tested to and conforms to the regulatory requirements of the European Union and has attained CE Marking. The CE Mark is a conformity marking consisting of the letters "CE". The CE Mark applies to products regulated by certain European health, safety and environmental protection legislation.
mTray T8 User Manual Rev. 2.0 Updated on 3June, 2014 Chapter 5 Disclaimer Notice Disclaimer Notice The manufacturer shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance or use of this material. This document contains proprietary information, which is protected by international patent applications and copyright. All rights reserved.
mTray T8 User Manual Rev. 2.0 Updated on 3June, 2014 Chapter 6 Warranty 1. Megabyte Ltd warrants to the User that the Products sold to the User will comply with their published specifications and will be of satisfactory quality and that Megabyte Ltd is entitled to sell the Products to the User. Megabyte Ltd warrants that for a period of twelve (12) months from date of purchase (“the Warranty Period”), the products will be free from defects in materials and workmanship. 2.
mTray T8 User Manual Rev. 2.0 Updated on 3June, 2014 Chapter 7 Support Technical support/Sales Enquiry can be obtained from Megabyte Ltd. Please email to: info@myndar.com Technical Contacts and Enquiry: info@myndar.com Website: www.myndar.com (This user manual / product specification is subjected to be changed without prior notice) P.