mHand H3-B User Manual Rev. 2.0 Updated on 20May, 2016 mHand H3-B User Manual Rev. 3.0 Model: mHand H3-B Technical Contacts and Enquiry: jimmywong@myndar.com Website: www.myndar.com (This user manual / product specification is subjected to be changed without prior notice) P.
mHand H3-B User Manual Rev. 2.0 Updated on 20May, 2016 Table of Content FCC statement..................................................................................................... 3 CE statement ....................................................................................................... 3 Chapter 1 Introduction of mHand H3-B ............................................................. 4 1.1 Overview of mHand H3-B .............................................................4 1.
mHand H3-B User Manual Rev. 2.0 Updated on 20May, 2016 FCC statement FCC NOTICE: To comply with FCC part 15 rules in the United States, the system must be professionally installed to ensure compliance with the Part 15 certification. It is the responsibility of the operator and professional installer to ensure that only certified systems are deployed in the United States. The use of the system in any other combination (such as co-located antennas transmitting the same information) is expressly forbidden.
mHand H3-B User Manual Rev. 2.0 Updated on 20May, 2016 Chapter 1 Introduction of mHand H3-B 1.1 Overview of mHand H3-B: mHand H3-B is an UHF EPC C1G2 mobile RFID handheld with Bluetooth technology, the plug & play Bluetooth connectivity increases the flexible on the RFID stock-take through Bluetooth enabled mobile device. Lightweight and OS independent, the ergonomic design with enhanced reading sensitivity.
mHand H3-B User Manual Rev. 2.0 Updated on 20May, 2016 1.2 Ports Description (1) Battery charging port Input port of the mHand H3-B: Items no. Name Description 1 Micro USB jack 5V/2A dc power supply input Technical Contacts and Enquiry: jimmywong@myndar.com Website: www.myndar.com (This user manual / product specification is subjected to be changed without prior notice) P.
mHand H3-B User Manual Rev. 2.0 Updated on 20May, 2016 1.3 Buttons in mHand H3-B (2) Power ON Button (3) Battery removable button Technical Contacts and Enquiry: jimmywong@myndar.com Website: www.myndar.com (This user manual / product specification is subjected to be changed without prior notice) P.
mHand H3-B User Manual Rev. 2.0 Updated on 20May, 2016 (4) Reading Lock Key (5) Read Button Technical Contacts and Enquiry: jimmywong@myndar.com Website: www.myndar.com (This user manual / product specification is subjected to be changed without prior notice) P.
mHand H3-B User Manual Rev. 2.0 Updated on 20May, 2016 Items no. Name Description 2 Power ON Button Press to switch the device on 3 Battery removable button Press to unlock battery 4 Reading Lock Switch on to retain reading function 5 Read Button Press to start reading 6 Psensor Key The Psensor turn on when covering on it. Then start reading function Technical Contacts and Enquiry: jimmywong@myndar.com Website: www.myndar.
mHand H3-B User Manual Rev. 2.0 Updated on 20May, 2016 1.4 Indicators LEDs in mHand H3-B (7), (8) (6) Blue LED indicates The LEDs show the read button is pressed in operation Bluetooth is ON (9) Orange LED indicates low battery (11) White LED indicates the device is ready but (10) Red LED indicates battery charging (12) Blue LED indicates the BT of the device is connected Bluetooth is not connected Technical Contacts and Enquiry: jimmywong@myndar.com Website: www.myndar.
mHand H3-B User Manual Rev. 2.0 Updated on 20May, 2016 The mHand H3-B has different LEDs to indicate the reader status. Items no.
mHand H3-B User Manual Rev. 2.0 Updated on 20May, 2016 1.
mHand H3-B User Manual Rev. 2.0 Updated on 20May, 2016 Chapter 2 Installation of mHand H3-B 2.1 Start-up Procedure of mHand H3-B This section explains how to set-up mHand H3-B and connect the mHand H3-B to your computer: I. Power On the mHand by pressing the Power On button. Power On Button II. White LEDs on both sides light up, which indicates the Bluetooth is ready. Technical Contacts and Enquiry: jimmywong@myndar.com Website: www.myndar.
mHand H3-B User Manual Rev. 2.0 Updated on 20May, 2016 III. Search and Pair the Bluetooth with your computer: • In startup manual, choose “Control Panel”. • In “Control Panel”, choose “Devices and Printers” • In “Devices and Printers”, press the button “add a device”, then select mHand BT address to pair. In general, the mHand BT name is called “ H3B_XXXXXXXXXXXXXX” IV. mHand H3-B operates at UHF frequency band, ranging from FCC 902-928 MHz, SRRC 920-925 MHz, KCC 917-920.8 MHz, ACMA 920-926MHz, MIC 916.
mHand H3-B User Manual Rev. 2.0 Updated on 20May, 2016 “UniversalReaderAssistant” in the computer to control the mHand operation. VII. Set the “COM” number in the program which is generated after paired. The “COM” number can be found in the device manager in the computer. VIII. Run the program. Technical Contacts and Enquiry: jimmywong@myndar.com Website: www.myndar.com (This user manual / product specification is subjected to be changed without prior notice) P.
mHand H3-B User Manual Rev. 2.0 Updated on 20May, 2016 2.2 Environmental Requirements The next table includes environmental requirements for the mHand H3-B. Choose a location that meets these requirements. Description Minimum Maximum Operating temperature 0ºC 40ºC Storage temperature -20ºC 60ºC Humidity (non-condensing) 20% 90% Technical Contacts and Enquiry: jimmywong@myndar.com Website: www.myndar.
mHand H3-B User Manual Rev. 2.0 Updated on 20May, 2016 2.3 Caution Danger of Electric Shock • Disconnect the device from the electric supply before cleaning or performing maintenance on the machine. • • Keep this device dry. Turn off or unplug the machine when it is not in use. Please read the information contained within this user manual prior to attempting installation and operation of the RFID Reader.
mHand H3-B User Manual Rev. 2.0 Updated on 20May, 2016 Chapter 3 Demonstration of RFID Applications 3.1 Creating RFID Application with mHand H3-B mHand H3-B is an intelligent reader and compliance with EPC global C1G2/ISO 18000-6C, Users can develop own UHF RFID application on this platform. 3.1.1 Delivering Application to mHand H3-B When the user wants to deliver applications to the mHand H3-B, they just simply install the program in Windows and Linux platform. 3.1.
mHand H3-B User Manual Rev. 2.0 Updated on 20May, 2016 Chapter 4 Regulatory Information 4.1 Federal Communications Commission (FCC) Compliance 4.1 Federal Communications Commission (FCC) Compliance This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
mHand H3-B User Manual Rev. 2.0 Updated on 20May, 2016 4.2 CE Compliance This device has been tested to and conforms to the regulatory requirements of the European Union and has attained CE Marking. The CE Mark is a conformity marking consisting of the letters "CE". The CE Mark applies to products regulated by certain European health, safety and environmental protection legislation.
mHand H3-B User Manual Rev. 2.0 Updated on 20May, 2016 Chapter 5 Disclaimer Notice Disclaimer Notice The manufacturer shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance or use of this material. This document contains proprietary information, which is protected by international patent applications and copyright. All rights reserved.
mHand H3-B User Manual Rev. 2.0 Updated on 20May, 2016 Chapter 6 Warranty 1. Megabyte Ltd warrants to the User that the Products sold to the User will comply with their published specifications and will be of satisfactory quality and that Megabyte Ltd is entitled to sell the Products to the User. Megabyte Ltd warrants that for a period of twelve (12) months from date of purchase (“the Warranty Period”), the products will be free from defects in materials and workmanship. 2.
mHand H3-B User Manual Rev. 2.0 Updated on 20May, 2016 Chapter 7 Support Technical support/Sales Enquiry can be obtained from Megabyte Ltd. Please email to: jimmywong@myndar.com Technical Contacts and Enquiry: jimmywong@myndar.com Website: www.myndar.com (This user manual / product specification is subjected to be changed without prior notice) P.