Tablet PC User Manual 1
Contents Contents.............................................................................................................................................. 1 1 Introduction .................................................................................................................................... . 3 1.1 Acknowledgements ......................................................................................................... ... 3 1.2 Precautions .................................................
1 Introduction 1.1 Acknowledgements Thank you very much for purchasing the product! MT-786 is a high-definition tablet PC with 7.85inch IPS screen. MT-786 features the master chip of MT8382 with quad-core Cortex-A7 processor and basic frequency of 1.3GHz. The product is based on the Android 4.2 operating system. The product’s built-in functions of Wi-Fi, BT, GPS, FM, 2G and 3G offer easy connection to wireless network to freely surf the Internet whenever and wherever possible.
your children understand all these instructions. For more details, please refer to the Safety Instructions and Precautions. Do not use the MID when driving for safety concerns. Please conform to the relevant rules and regulations in medical premises. Please shut down the MID when staying around medical facilities. Please shut down the MID or activate the airplane mode when boarding an airplane to prevent wireless signals from interfering in the airplane’s control signal.
2 Quick Look at MID 2.1 MID Usage and Preparation Charge Battery Please charge the battery prior to initial use of the MID. 1. Charge the MID with a power adapter. 2. Check the power indicator. Flashing red light indicates the warning that battery level is lower than 10%; red light indicates that the battery is charging when battery level is higher than 10%; green light indicates that battery level is full. 2.
Connected to Wi-Fi Battery Level Picture 2.1 Notification Panel The notification bar will report new mails, Wi-Fi activation and ongoing operations. You can open the notification panel to view details. Open Notification Panel When a new notification icon is displayed on the notification bar, please click the notification bar to open the notification panel.
3 QuickStart 3.1 Functions of Keys Introduction to Functions: Power Short-press to activate sleep/wake mode, long-press to activate Power On & Power Off functions Volume Up Turn up the MID Volume Down Turn down the MID HOME Make a click in any interfaces to go back to main interface Back Make a click in any interfaces to go back to parent directory Menu The key will be displayed in apps of the Menu key Record the user’s browsing history Recent Apps 3.
3.3 Switch On/Off Screen Screen will be switched off automatically in idle condition 1. After idling awhile, the screen will be switched off automatically to save power. 2. Press the POWER key when the screen is in Switched On mode and it will be switched off immediately. Switch on the screen under Switched Off mode Press the POWER key to switch on the screen in Switched Off mode. The screen will proceed to the Lock mode after being switched on.
When you want to input information through screen keyboard or select apps and other items on the main UI, just touch and click the target on the screen. Hold If you want to activate available options of an item, e.g. textbox or website links, or shortcut on main UI and shift main program menu, just hold the icon of the item. Quick Slide or Slide Quick Slide or Slide indicates the quick action of vertical or horizontal drag-and-drop by a finger on the screen.
Picture 3.2 View Basic System Infomation Drag downward after making a click on the upper left-hand corner of the MID. Then you can view basic system infomation. You can view or revise information as required through all these shortcuts, as shown in Picture 3.3.
Picture 3.3 3.5 Home Screen The Home screen is as shown in Picture 3.4. You can use apps and shortcuts, and customize the wallpaper of the main UI (user inferface) by touching any blank space of the screen.
Picture 3.4 Extensible Home Screen The Home screen or main UI can be extended beyond the screen itself, so as to provide more space for you to accommodate additional shortcuts, widgets, etc. Press at any blank space of the main UI and fastly slide to right or left. Then you can reach the left or right side of the Home screen. As shown in Picture 3.5, there are more than two (2) extensible pictures on the main UI.
Picture 3.5 Manage Shortcut Icons of Apps on Desktop Create Folder Icon on Desktop 1. Drag all icons together to stack on a master icon (or converge them different icons), as shown in Picture 3.6. 2. Then click the master icon where many shorcuts are overlayed and unfold all the app icons, as shown in Picture 3.7. Click the lower edge of the black box to display the position of "Unnamed Folder". The hidden keyboard will pop up for you to rename the folder (as with Apple’s IOS system).
Picture 3.6 Picture 3.
Delete Icon on Desktop 1. Hold the icon to be deleted until the icon will be displayed at the top of the screen. 2. Drag the icon to the top of the icon to be deleted. After the icon turns red, release your finger to delete it. Replace Desktop Wallpaper 1. On the main UI, keep touching the blank space of the Home screen. Then a window will pop up to allow you to set wallpaper. 2.Click gallery or wallpaper gallery to select a picture. Voice Search 1. Touch the MIC icon 2.
Picture 3.8 3.6 Access Application Click the key at lower middle of Picture 3.4 to proceed to main menu interface, as shown in Picture 3.9. Select the app to be accessed.
Picture 3.9 3.7 USB Connection MID Storage Settings You must set storage mode of the MID before transfer files: 1. Connect the MID with PC by USB cable. Prompt will be displayed in notification bar. 2. Open notification panel; please refer to Article 2.2 -MID Status and Notification for details of how to open panel. 3. In the notification panel, click “USB Connected” and then click “Open USB Storage Device”, as shown in Picture 3.10. 4. Then, the USB connection is completed.
Picture 3.10 Copy Files to Memory Card 1. Connect the MID with PC by USB cable. 2. Realize successful connection to PC in line with “MID Storage Settings”. 3. Turn on your PC and check the information contained in “Removable Disk (x)” from “My Computer”. 4. Find the files to be copied and then copy them to “Removable Disk (x)”. 5. After copy completes, just click “Close USB Storage Device” to uninstall the MID.
(2)Click “Language & Input Method”. (3)All input methods installed on your MID will be listed at text setting area. (4) Check at the end of preferred input method. Use and Switch Input Method ① ⑤ ② ④ Picture 3.11 ③ 1 Caps lock 2 Swithch to number input mode 3 Click to insert whitespace 4 Click to perform input operation 5 Delete the character at left side of cursor. Click and hold to delete all characters at left side of cursor. 3.
Click on “Widgets” at the top of application interface and go to Widgets interface. Keep holding any widget to create its shortcut on the desktop. Click the shortcut on the desktop and access the corresponding app fast. Create Shortcut Icon of Apps on Desktop In apps or widgets interface, keep touching any icon will lead you to the desktop automatically. By draging and holding the icon, you can put it at any position on the desktop.
4 Basic Settings 4.1 SIM Management 4.1-1 Voice Call Select “Settings” on the main menu interface and select “SIM Management”, as shown in Picture 4.1. Picture 4.1 Click “Voice Call” and select the default SIM card for voice calls, as shown in Picture 4.2.
Picture 4.2 4.1-2 Video Call Select “Settings” on the main menu interface and select “SIM Management”. Click “Video Call” and select the default SIM card for video calls, as shown in Picture 4.3.
Picture 4.3 4.1-3 Messaging Select “Settings” in main menu interface and select “SIM Management”. Click “Messaging” and select the default SIM card for messaging, as shown in Picture 4.4. Picture 4.4 4.1-4 Data Connection Select “Settings” on main menu interface and select “SIM Management”. Click “Data Connection” and select the default SIM card for data reception and transmission, as shown in Picture 4.5.
Picture 4.5 4.2 Wi-Fi & WLAN Establish Wi-Fi Connection 1. Select “Settings” on main menu interface. 2. Click Wi-Fi, and the MID will automatically scan the available Wi-Fi wireless networks, as shown in Picture 4.6. 3. Select the Wi-Fi network for connection. The “Enter Password” window will pop up in case of encrypted network. First enter the correct password and then click “Connect”.
Picture 4.6 2. Add Network 1. Click the icon in the upper right-hand corner of Picture 4.6, as shown in Picture 4.7.
Picture 4.7 2. Input network SSID, i.e. the name of wireless network, and select “Save”. 3. Network Notification After the “Network Notification” is clicked to display Wi-Fi signal, the icon in the upper left-hand corner will prompt you that WLAN network is available. 4. Keep WLAN on During Sleep. 1. Click the icon in the upper right-hand corner of Picture 4.6 and select “Advanced”. 2. Click to choose the status “Keep WLAN on during sleep” as shown in Picture 4.8. Picture 4.8 4.
Picture 4.9 4. Click the available devices and the “Bluetooth Pairing Request” window will pop up. Just click the “Pair”, as shown in Picture 4.10. Picture 4.
5. After paired, find the machine ID to be edited in the paired device, click the icon to proceed to the interface as shown in Picture 4.11. Then, you can perform the required operations. Picture 4.11 Bluetooth Settings 1. Rename Tablet Click the icon in the upper right-hand corner of Picture 4.9, as shown in Picture 4.12, select “Rename Tablet” to change name.
Picture 4.12 2. Settings of Visibility Timeout Select “Visibility timeout” in Picture 4.12 to select the preferred time settings, as shown in Picture 4.13 (Note: Visibility timeout refers to the time when Bluetooth is visible).
Picture 4.13 3. Show Received Files Select “Show received files” in Picture 4.12 to view the record of downloaded and uploaded files. 4. Advanced Settings of Bluetooth Select “Advanced settings” in Picture 4.12 to proceed to Picture 4.14. Picture 4.14 1. File Transfer Service Turn on “FTP server”, namely allow supporting connection with Bluetooth devices of FTP client to realize access and operation to server files. 2. Bluetooth Remote Sensor Turn on “Bluetooth Remote Sensor”.
Picture 4.15 4.5 More... 4.5-1 Airplane Mode Airplane mode is the module to fast turn off Wi-Fi and GSM card functions. When activates the Airplane mode, Wi-Fi and GSM signals will be shielded. After turning off airplane mode, Wi-Fi and GSM modules will return to normal. 4.5-2 VPN Open VPN and click the key in the upper right-hand corner, as shown in Picture 4.16. Input name and fill in the corresponding server address.
Picture 4.16 Click the created VPN, as shown in Picture 4.17. Input the purchased VPN account and password, and then click “Connect”. Picture 4.
4.5-3 Tethering and Portable Hotspot 1. WLAN Hotspot 1. Select “Settings” on the main menu interface. 2. After making sure of connection to Wi-Fi, click the “More…” option and open “Tethering and Portable Hotspot”. Picture 4.
Picture 4.19 3. Click WLAN hotspot to turn it on, other users can apply for connection to realize Wi-Fi tethering, as shown in Picture 4.20. Picture 4.
4. Click “Keep Wi-Fi hotspot on” to set period of keeping WLAN on, as shown in Picture 4.21. Picture 4.21 5. Click “Set up Wi-Fi hotspot” to perform password setting and alteration to the activated Wi-Fi hotspot, as shown in Picture 4.22.
Picture 4.22 4.5-4 Mobile Network Data Connection After turning on data traffic, it’s applicable to access SG/3G network through SIM. 3G Service Click 3G service to select the SIM to be accessed to 3G network and switch network models. Preferred Networks Change different network environments for SIM as per personal preference. Access Point Names (APN) Click “Mobile network settings”, as shown in Picture 4.23. Picture 4.23 Select “Access Point Names (APN)”.
Picture 4.24 Network Operator Click “Network Operator” to choose the preferred network operator. In addition, it’s applicable to manually select network connection type or automatically choose network connection, as shown in Picture 4.25.
Picture 4.25 4.6 Audio Profiles 1 Open “Settings” and click “Audio profiles” to make option, as shown in Picture 4.26.
Picture 4.26 2 Click “General” to proceed to Picture 4.27. Picture 4.
In Picture 4.27, click “Vibrate” to vibrate the MID for incoming calls. Volumes In Picture 4.27, click “Volumes” to adjust volume of “Ringtone & Notification” and “Alarms”, as shown in Picture 4.28. Picture 4.28 Voice Call Ringtone In Picture 4.27, click “Voice Call Ringtone” to select voice call ringtone, as shown in Picture 4.29.
Picture 4.29 Video Call Ringtone In Picture 4.27, click “Video Call Ringtone” to select video call ringtone, as shown in Picture 4.30.
Picture 4.30 (Note: Except for the General mode, the Mute, Meeting and Outdoor modes cannot be set up or adjusted but for option only.) 4.7 Display 4.7-1 Theme 1. Click “Settings” . 2. Click “Display” and then “Theme”. Four kinds of different styles are available, as shown in Picture 4.31. Picture 4.31 4.7-2 Wallpaper 1. Click “Settings” . 2. Click “Display” and then “Wallpaper”. 3.
Picture 4.32 4.7-3 Brightness 1. Click “Settings”. 2. Click “Display” and then “Brightness”. 3. Brightness settings panel pops up; Drag the slider right and left to adjust brightness, as shown in Picture 4.33.
Picture 4.33 4. After getting the proprt brightness, click “OK”. Note: Automatic brightness is the light sensation; in different environments with varied light intensity, the MID will automatically change screen brightness; if you have checked automatic brightness, you won’t be able to manually adjust brightness until you shut the function down. 4.7-4 Font Size Click “Font size” to adjust font size displayed on the MID, as shown in Picture 4.34.
Picture 4.34 4.7-5 HDMI Setting Open “HDMI Setting” after connection to HDMI. Click “Video Resolution” to adjust resolution. 4.7-6 Sleep 1. Click “Settings”. 2. Click “Display”. 3. Click “Sleep”. 4. Screen timeout settings window pops up to select the preferred stand-by time, as shown in Picture 4.35.
Picture 4.35 4.8 Storage Open the “Settings” function, and then select “Storage” and “Default Write Disk” to choose the default write disk when installing new apps. Check available storage space of the SD card and MID 1. Select “Settings”. 2. Click “Storage” to check available storage space. 1. Internal Storage (1) System Storage System storage is the space the MID reserves for system files, as shown in Picture 4.36. The content contained in the space cannot be accessed.
Picture 4.36 (2) Internal Device Internal device refers to the MID’s NAND, as shown in Picture 4.37; in need of checking its storage content, it’s applicable to select “File Management” on the main menu interface to view details.
Picture 4.37 2. SD Card In Storage interface, you can check total space and available space of SD card, and perform operations of “Remove SD card” and “Format SD Card”, as shown in Picture 4.38.
Picture 4.38 Safely Remove SD Card 1. Click “Settings” . 2. Click “Storage”. 3. Click “Remove SD Card”. 4. Then, you can remove the SD card safely. Note: Safe removal of SD card can effectively protect SD card and extend the service life of SD card. 4.9 Battery Click “Settings” function, and then select “Battery” to check battery percentage, as shown in Picture 4.39.
Picture 4.39 4.10 Apps 1. Select “Settings” in the apps list. 2. Select the “Apps” item to manage and delete installed apps. Then check the used space and available space of system storage in the lower left-hand corner, as shown in Picture 4.40.
Picture 4.40 3. Check the used space and available space of internal storage, as shown in Picture 4.41.
Picture 4.41 4. Check the running apps, used space and available space, as shown in Picture 4.42. Picture 4.42 4.11 Location Access Click “Settings” function and select “Location Access”, as shown in Picture 4.43.
Picture 4.43 1. Access to My Location After turning on “Access to My Location”, you can position the MID by Wi-Fi or mobile network. 2. GPS Satellite Positioning Turn on the “GPS Satellites” function. Set the position of the MID by GPS. 4.12 Security Set up Screen Lock It’s applicable to use unlocking pattern or password to lock touch screen, so as to protect your MID’s privacy.
Connect 4 spots vertically, horizontally or diagonally at least, as shown in Picture 4.44. After completion, release finger from the screen, the system will record your setup pattern. 7. Click “Continue”. 8. When displaying prompt, retry the screen unlocking pattern and click “OK”. Picture 4.44 Set up Unlock PIN Code 1. Click “Settings” on the main UI. 2. Click “Security”. 3. Click “Screen Lock”. 4. Select “PIN” in the pop-up text setting area. 5. Enter new PIN code (Numbers) and select “Continue”. 6.
6. Reenter new password and select “OK”. Unknown Sources 1. Click “Settings” on the main UI. 2. Click “Security”. 3. Click “Unknown Sources”, as shown in Picture 4.45. Picture 4.45 Note: Only when activating unknown sources can realize successful manual installation of APK file. 4.13 Language and Input Method Click “Settings” and select “Language and Input”. Select “Language” to change system default language, as shown in Picture 4.46.
Picture 4.46 Click “Settings” and select “Language and Input”. Select “Android Keyboard Settings” and “Input Language”, as shown in Picture 4.47.
Picture 4.47 In input languages interface, uncheck “Use System Language”, and then choose your preferred default language under active input method, as shown in Picture 4.48. Picture 4.48 Return to “Language and Input” and click “Default” to choose your favorite input method, as shown in Picture 4.49.
Picture 4.49 4.14 Backup and Reset Having connected to Wi-Fi and logged in your Google account, you can select “Backup My Data”. Then the system will back up your current data to Google server. Factory Data Reset Click “Factory Data Reset” to erase all data from your tablet’s internal storage. In need of erasing data in NAND, check “Erase Internal Storage” before resetting to factory data.
Picture 4.50 4.15 Accounts and Sync 1. Select “Settings”. 2. Open “Accounts and Sync”, as shown in Picture 4.51.
Picture 4.51 3. Select the email type to be accessed. 4. Successful login will automatically activate sync function, as shown in Pictures 4.52 and 4.53.
Picture 4.52 Picture 4.53 4.16 Data and Time As per presetting, the system will automatically use network-provided date, time zone and time. Manually adjust date, time zone and time 1. Click “Settings”. 2. Scroll down the screen and then click “Date and Time”. 3. Turn off “Automatic Date & Time”. 4. Turn off “Automatic Time Zone”. 5. Click “Select Time Zone” and then select the time zone in the list. Scroll down the list to view more time zones.
24-hour sytems. The confirmed time format will be applied to time format of alarm. 9. Click “Choose Date Format” and then select the date format displayed on the MID. Picture 4.54 Note: In case of using network-provided automatic time, you’ll fail to set date, time and time zone manually. 4.17 Scheduled Power On & Off 1. Access “Settings”. 2. Click the “Scheduled Power On & Off” option. 3. Steps are as shown in Picture 4.55.
Click to access On/off scheduled of Scheduled power-on power-on settings On/off Click to access Scheduled scheduled power-off power-off settings Picture 4.55 4.18 Accessibility 4.18-1. Talkback Talkback is the function specifically provided for the blind and users with visual impairment, the system will make voice feedback for specific content you touch, select and activate. 4.18-2.Large Font After checking, the system font will be larger. 4.
Picture 4.56 4.18-5. Install Web Scripts After activating, the system will allow you to install web scripts, but to increase security risk when you browse web pages. 4.18-6. Quick Boot After activating quick boot function, the MID will proceed to incomplete power-off mode; when booting, the boot speed will be promoted substantially. 4.19 Developer Options Click “Developer Options” and check the icon in the upper right-hand corner corner to turn the function on. 1.
software, but USB storage should be applied by manual operation. 4. Display Touch Operation Turn on “Display Touch Operation”, and the touch area will display on your MID. It is recommended that you also use “Cursor Location” to achieve higher accuracy and definition. 5. Cursor Location After turining on the “Cursor Location”, it’s applicable to read horizontal and vertical axis coordinates of your operations to touch spots on the MID. 4.20 About Tablet Local Update Store update.
Address”and other information.
FCC warning statement. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
-Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. Specific Absorption Rate (SAR) information: This 7.85 inch Tablet PC meets the government's requirements for exposure to radio waves.
Body-worn Operation This device was tested for typical body-worn operations. To comply with RF exposure requirements, a minimum separation distance of 1.5 cm must be maintained between the user’s body and the handset, including the antenna. Third-party belt-clips, holsters, and similar accessories used by this device should not contain any metallic components. Body-worn accessories that do not meet these requirements may not comply with RF exposure requirements and should be avoided.