BLUETOOTH WIRELESS SPORTS EARPHONES WITH MEMORY WIRE model: X6 USER MANUAL
EN TABLE OF CONTENTS Product Overview First Use Instructions Charge the Sport-Fi X6 Pair with Your Device Configure for Your Ears Use While Exercising Bluetooth® Functionality Turning On and Off Pairing Connecting Controlling Media and Volume Controlling Phone Calls Other Functionality Charging Status Indicator Lights Use While Traveling with Altitude Changes Care and Storage Warning Specifications Troubleshooting Warranty Information MEElectronics and its logo are registered trademarks of S2E, Inc.
PRODUCT OVERVIEW EN Bluetooth Sports Earphones with Memory Wire A B C E D F A B C D E F Multifunction button Volume up/skip track button Volume down/previous track button LED indicator light Micro-USB charging port Microphone
FIRST USE INSTRUCTIONS 1. CHARGE THE SPORT-FI X6 a) Plug the X6 charging cable into a powered USB port and the Micro-USB port of the X6. The red light will stay lit while charging and turn blue when fully charged. 2. PAIR WITH YOUR DEVICE a) When the X6 is off, press and hold the multifunction button for 6 seconds until you see the red and blue lights flashing in an alternating manner. The X6 will say “Pairing.” Pairing mode will remain active for 2 minutes or until paired.
FIRST USE INSTRUCTIONS (Continued) 3. CONFIGURE FOR YOUR EARS (CONTINUED) b) Identify the Right and Left Channel They are not interchangeable, and the cable must be worn over-the-ear. c) Configuring the Memory Wire i. Straighten the memory wire. ii. Put the earphones in your ears. iii. Ensure the ear tips seal with your ear canals and the earphone is flush in the ear. iv. Bend the memory wire tightly around the back of your ears to achieve a conforming a fit. v.
FIRST USE INSTRUCTIONS (Continued) 3. CONFIGURE FOR YOUR EARS (CONTINUED) d) Use the sliding cable cinch to reduce cable slack for the most secure and comfortable fit. slide the cable cinch up and down USE WHILE EXERCISING The MEElectronics X6 is ideal for exercise as the over-the-ear fit will keep it in place during just about any activity. External noises will be greatly reduced due to the noise isolating properties.
BLUETOOTH FUNCTIONALITY 2. PAIRING: *** It is only necessary to pair your X6 once with each device *** Locating the Bluetooth menu: iPhone®, iPad®, and iPod Touch® a) On your device, go to Settings b) Select Bluetooth. If Bluetooth is not on, turn it on. The iPhone/iPad/iPod will automatically search for new devices c) Proceed as defined in step 2 of First Use Instructions Android™ Phones and Tablets a) On your device, go to Settings menu b) Select Bluetooth or Wireless & Networks Bluetooth.
BLUETOOTH FUNCTIONALITY (Continued) 3. CONNECTING: Once the X6 is turned on, it will automatically connect with the last paired Bluetooth device that is on and within range. If the X6 is not connected automatically, go to the Bluetooth menu on your device and select “Sport-Fi X6” from the Bluetooth device list to connect. Note: The X6 will only connect with one device at a time. 4. CONTROLS: The X6 can control media and phone calls from a smartphone or tablet.
BLUETOOTH FUNCTIONALITY (Continued) 4. CONTROLS (CONTINUED): c) Other Functionality: i. Voice dialing (Siri): double-press the multifunction button. ii. Redial the last number: long-press the multifunction button. iii. Switch between phone handset and X6 headset during a call: long-press the multifunction button. CHARGING Plug the charging cable into a powered USB port and the Micro-USB port of the X6. The red light will stay lit while charging and turn blue when fully charged.
USE WHILE TRAVELING WITH ALTITUDE CHANGES The in-ear design of the earphones should create a small, sealed air pocket in your ear canal. Changes in altitude will affect the pressure in this air pocket resulting in changes in sound and comfort. It is recommended that you break the seal by removing and re-inserting the earphones when you feel increased pressure. CARE AND STORAGE Use the included carrying case for storage while not in use for protection.
www.meelec.