Manual

STEREO BLUETOOTH
PORTABLE SPEAKER
AFS1
Congratulations, and thank you for choosing the
MEElectronics AFS1 Bluetooth Wireless Speaker
Bluetooth Information
Bluetooth is a short-distance two-way wireless communication technology
capable of transmitting data, commands, and audio between devices. The AFS1
can connect with many devices such as mobile phones, tablets, PDAs,
computers, media players, and more through a process called pairing. Before
you can use your AFS1 with your device they will need to be paired.
Warning
Turn down the volume prior to using the speaker; adjust the volume to the
desired level once it is connected. Do not use speakers at high volumes for
extended periods of time as doing so may result in permanent hearing damage.
Please visit www.osha.gov for more info.
!
Safety Guide
a) Do not use your wireless speaker around flammable gases as fire or explosion
may occur.
b) Keep the device and packaging out of the reach of children.
c) There are no user replaceable/reparable parts in the headset.
Disassembling it will void your warranty.
d) Do not expose the speaker to moisture, water, or other liquids.
Package Includes
USB Charging
Cable
User Manual
AFS1 Bluetooth
Speaker
user manual
www.me elec.co m
AFS1
How to Use
Desired Result
Turn on
Enter pairing mode
Pairing
Required Action
Press for 3 seconds when the device is off
(Blue LED slowly flash and the speaker will beep).
Press and hold for 6 seconds when the device
is off (There will be two beeps to indicate paring mode
has initiated and blue and red LEDs will quickly flash
alternately while in pairing mode).
The LEDs will continue to flash alternatively when in
pairing mode. Once paired, the alternating blue and red
LEDs will be replaced by a slow, flashing blue LED.
How to Use Cont.
Desired Result
Connecting
Play
Next/Volume up
Previous/Volume down
Required Action
Make sure your device has been paired with the AFS1.
Make sure Bluetooth on your device is on. Turn on the
AFS1. The AFS1 should automatically connect with your
device. If not, you may need to select the connect option
on your device.
Press to play when the device is paused and
press to pause when the device is playing.
Short press for volume up and long press to
skip to the next track.
Short press for volume down and long press
to restart the track, or skip to the previous track.
Charging
*** You must charge the headset for at least 6 hours before the first use ***
The AFS1 charges with the included USB cable. Plug the small cylindrical
connector of the cable into the port marked “ ” and the other end of the
cable into any powered USB port. While charging, the red LED will continuously
be on; please make sure the light is on once you initially plug in the AFS1. The
light will turn blue when charging is complete.
Pairing
To use your AFS1 speaker, you must first pair it with another device such as a
phone, tablet, or computer. Once your AFS1 speaker is paired, it should
automatically be recognized when the AFS1 is turned on and within range, and
Bluetooth is enabled on your device.
Pairing Cont.
Please follow these steps to pair your AFS1 speaker:
- Turn the Bluetooth function on your device on, and set it to search/discovery
mode if necessary. Many phones and tablets are automatically in discovery
mode when the Bluetooth menu is opened.
- Put the AFS1 speaker into pairing mode by pressing for 6 seconds.
The red/blue LEDs will flash in an alternating manner.
- AFS1 should appear on the screen of your device. Note: your device might add
a description such as “audio device” to the name of the AFS1.
- Once you see the AFS1 on your device screen, follow the device instructions to
pair the AFS1 (usually tapping on the device screen for touch screens or
selecting the AFS1 and clicking OK).
- If you device asks for a passkey or PIN, enter 0000.
- If your device requests that you confirm the pairing, please do so.
Technical Specifications
Bluetooth® Specification : 2.1+EDR
Bluetooth® Profile: A2DP AVRCP
RF Range: 10m
Driver: 50mm dynamic driver
Frequency Response: 100Hz-20KHz
Loudspeaker Output: 3W
Signal-To-Noise: 75dB
Distortion: 1.0%
Playback Time: 8 hours
Charging Time: 6 hours for the first charge, 3 to 4 hours for subsequent charges
Dimension: 80
x 80 x 42 mm
Weight: 120g
Maintaining your AFS1
a) Turn the device off and store the AFS1 in a cool, dry, safe place.
b) Avoid extreme temperatures (45°C/113°F and above, including direct sunlight
or -10°C/14°F below) for storage as they will shorten the service life of the
battery.
c) If the device comes in contact with liquids, quickly wipe away. If submersed in
water, do not turn the device on until completely dried.
Note: liquid submersion voids the warranty.
Product Features
Note: The LED lights are only visible from the side
Lanyard
3. Previous / Volume Up
1. Multi-function Key:
Turn On/ Off, Play / Pause,
Enter Pairing Mode, Phone Controls
7. Microphone4. Charging Port
2. Next / Volume Down
Use as a Speakerphone
Desired Result
Redial
Answer/End/Reject
a Call
End a Call
Required Action
Press and hold for 2 seconds. You will hear a
beep when the redial begins. Note: if you hold the button
too long, the AFS1 will shut off.
When the speaker is on and connected and there is an
incoming call you will hear a tone.
- Press to answer the call
- Press for 2 seconds to reject the call
When the speaker is in use as a speakerphone, you can
end the call by pressing the button.
Use as a Speakerphone Cont.
Desired Result
Put a Call on Hold
Call Waiting
Turn Off
Low Battery Warning
Charging
Required Action
To place an active call on hold, double click the
button. To resume the call, press
When there is an active call and another call is incoming,
double clicking the button to hold the current call
and accept the incoming call
Press for 3 seconds when the device is on
(the speaker will give a descending series of beeps when
shutting down, and all LEDs will be off).
The red LED flashes
Plug the charger to “ ” port of the device. The red LED
will be on when charging and turn blue when charging is
complete. NOTE: You cannot connect or pair while charging
Make sure the speaker is connected to your phone via Bluetooth to enable call
functionality. See below for specific functionality.
Basic Operations
Troubleshooting
Please visit www.meelec.com for troubleshooting help.
1
2
4
5
3
7
1
6
2
3
5. Lanyard Strap Hole
6. LED Light Ring
press down
on top
this
side
up
bottom view
top view
User Manual