Z P1 HIGH FIDELITY AUDIOPHILE IN-EAR HEADPHONES
Thank you for choosing the MEE audio Pinnacle P1 High Fidelity In-Ear Headphones. The Pinnacle P1 is a high-impedance in-ear headphone designed for audiophiles and music professionals and tuned to deliver the highest levels of resolution and refinement.
Package Contents Pinnacle P1 Audiophile In-Ear Headphones High-fidelity silver-plated stereo audio cable Headset cable with microphone and remote Comply T-200 memory foam eartips (3 pairs) Silicone eartips (6 pairs) ¼” (6.
Configuring for Your Ears An airtight seal between the earpieces and your ear canals is required for your Pinnacle P1 earphones to deliver the level of sound quality they are engineered for. Multiple sets of eartips are included to ensure you get the best fit. We recommend trying each of the included eartips to find the size that provides the best comfort and sound for your ears. Because ear canals are not always symmetrical, you may need to use different-size ear tips in each ear.
Memory Foam Eartips The Pinnacle P1 comes with Comply™ Memory Foam eartips in three sizes. Memory foam eartips are designed to provide a more comfortable fit by using body heat to conform to the shape of the ear canal. Install Comply eartips as shown on previous page. Inserting the ComplyTM Premium Memory Foam Eartip 1. Roll the tip into a thin, round cylinder. 2. Pull back and up on the ear to open the canal. Gently insert the entire tip into the ear.
Attaching the Earpieces The Pinnacle P1 includes two detachable, interchangeable cables: 1. STEREO AUDIO CABLE Silver-plated 99.99% pure copper stereo audio cable ensures the richest detail retrieval and maximum performance with high-end audio systems. 2. HEADSET CABLE The headset cable incorporates a microphone and remote button for phone calls and media control with compatible phones and tablets (see MICROPHONE & REMOTE USE section on p. 8 for more info).
Selecting a Wear Style The unique ergonomics and detachable cables of the Pinnacle P1 are designed so that the earphones can be worn either in the conventional “cable down” style or using a “cable up” musician fit, which can be more secure and reduces cable noise (microphonics).
Selecting a Wear Style (CONTINUED) Adjust earpiece until it fits flush in the ear and the eartip seals in the ear canal. Repeat for other side. CABLE UP CABLE UP AND BEHIND BACK* *Note: the microphone may not work properly when using the headset cable in this configuration.
Cable Management Slide the cable cinch up to fix the earphones in place for the most secure fit 7 Use the shirt clip to control cable movement
Microphone & Remote Use The headset cable included with the Pinnacle P1 features an inline microphone and remote that can be used during phone calls and to control media playback.
Care and Storage Do not remove from ears or headphone jack by pulling on the cable. Always store in the included protective carrying case when not in use. Do not store in direct sunlight, near heating devices, or in humid places. Do not expose to liquids. If the earphones come in contact with liquids, quickly wipe away. If submersed in water, do not use until completely dried. Note: liquid submersion voids the warranty.
Support Contact support@meelec.com or visit www.MEEaudio.com for troubleshooting information and solutions to common issues. warranty MEE earphones purchased from authorized retailers are covered by a 2-year manufacturer warranty. Visit www.MEEaudio.com for warranty information. Specifications See the Pinnacle P1 product page at www.MEEaudio.com for product specifications MEE audio and its logo are registered trademarks of S2E, Inc. All rights reserved.
Z www.MEEaudio.com support@meelec.