Remote transmitter
1 The MiniMed Model 503 Remote Transmitter is an accessory item for your MiniMed Paradigm Insulin Pump that allows you to program a bolus or suspend and resume your pump without pressing any of the pump’s buttons! The remote transmitter sends signals to a receiver in your pump. This is designed to add more freedom and flexibility to your daily activities. Of course, you can still program your pump by using the five buttons on the pump keypad.
2 3 Using the Remote Transmitter to Deliver a Bolus WHY: Allows you to deliver an Easy Bolus using the remote transmitter HOW: 1. Turn ON Easy Bolus. 2. Press and hold ACT on the remote transmitter for at least three seconds to ‘wake up’ the pump. When the pump is awake, it will beep or vibrate. You will now be able to program an easy bolus. 3. Press the B button as many times as you want to select the bolus amount. Each press will result in a beep or a vibration.
5 Using the Remote Transmitter to Suspend/Restart the Pump 1. Press and hold ACT on the remote transmitter for at least three seconds to ‘wake up’ the pump. When the pump is awake, it will beep or vibrate. B S AC T 2. To suspend pump delivery, press the S button, then press ACT. Three audible beeps/vibrations will confirm that the pump is in suspend mode. 3. To resume basal delivery, press and hold ACT on the remote transmitter for three seconds. This will “wake-up” the pump.
6 7 If the Remote transmitter is Dropped 1. Check that the remote transmitter panels (front and rear) are still attached. If the remote transmitter does not “wake up” the pump: c. Make sure the easy bolus and the remote transmitter on the pump are turned ON. d. Make sure the RF ID is correctly entered. e. If this does not correct the problem, call MiniMed. 2. Press and hold the ACT button on the remote transmitter to check communication with the pump. If the Remote transmitter is Submerged 1.
8 9 FCC Notice for the Remote transmitter This device complies with the United States Federal Communications Commission and international standards for Electromagnetic Compatibility regarding its use. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesirable operation.
10 11 Indications The MiniMed Model 503 Remote Transmitter is intended for use with the MiniMed Paradigm Insulin Pump Model 511. Warnings The MiniMed Model 503 Remote Transmitter is powered by a single A23 battery cell. To help ensure proper operation, change battery when the LED emits three quick flashes without pressing a key or fails to flash when a key is pressed.
