User Manual

ManualsBrandsMedtronic MiniMed ManualsElectronics500RU

Welcome to the MiniMed User’s Guide for the model 500 Remote Programmer for the model 508

insulin pump!

The Model 500 Remote Programmer is an accessory item for the model 508 insulin pump that allows you

to program a bolus or suspend and restart your pump remotely! The Remote Programmer contains a

transmitter that sends signals to a receiver in your 508 pump. This is designed to add more freedom and

flexibility to your daily activities!

This user’s guide is designed with visual and printed information to help you learn to use your

programmer. However, working with your health professional will speed your familiarity of this tool.

Summary of content (8 pages)

PAGE 1
Welcome to the MiniMed User’s Guide for the model 500 Remote Programmer for the model 508 insulin pump! The Model 500 Remote Programmer is an accessory item for the model 508 insulin pump that allows you to program a bolus or suspend and restart your pump remotely! The Remote Programmer contains a transmitter that sends signals to a receiver in your 508 pump.
PAGE 2
NEED TO KNOW The Remote Programmer is a very simple and easy to use device. ! Three buttons control all the programming: • ‘STOP’: Suspends or restarts your pump • ‘BOL’: Allows you to set an audio bolus • ‘ACT’: activates your programming choices. ! The remote programmer runs on a single A23 battery. The programmer will go into ‘sleep mode’ when it is not being used to help preserve battery life. About the LED ! When the remote programmer is in “sleep mode”, green LED will be off.
PAGE 3
4. ! You can have a maximum of three active remote programmers. You may program them following the same steps. You have the ability to add the ID numbers for up to three remote programmers. To add, delete or review remote programmer ID numbers, select this option at step three above. The pump screen will return to the TIME OF DAY screen.
PAGE 4
! The remote programmer will work at a distance up to 18 inches. Using the Remote Programmer to Deliver a Bolus: Purpose: Allows you to deliver an audio bolus using the remote programmer. Process: ! The Audio Bolus feature must be ON to set a bolus 1. Press the ACT button on the remote programmer for five seconds to ‘wake-up’ the pump. When a link has using the remote occurred the pump will beep and/or vibrate for two programmer. seconds. You will now be able to program a normal, audio bolus. 2.
PAGE 5
Device Care and Maintenance INSTALLATION OF THE BATTERY Place the remote programmer face down on a secure, flat surface. Using a standard Phillips screwdriver, unscrew the rear panel. Remove the used battery and discard properly. 3. Insert new battery according to diagram on remote programmer case. 4. Replace rear panel and screw to connect remote programmer components. 1. 2. Your remote programmer should start as soon as the battery is inserted. If this does not happen: A.
PAGE 6
X-Rays, MRIs and CT Scans: 1. If you are going to have an X-ray, CT scan, MRI or any other type of radiation therapy, TAKE YOUR PUMP AND REMOTE PROGRAMMER OFF.
PAGE 7
FCC Notice This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference and (2) This device must accept any interference received, including interference that may cause undesirable operation. This device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
PAGE 8
Indications The MiniMed Model 500 Remote Programmer is intended for use with the Model 508 Insulin Infusion Pump. Contraindications Pump therapy is not recommended for people who are unwilling or unable to perform at least four blood glucose tests per day. Warnings The Model 500 Remote Programmer is powered by a single A23 battery cell. To help ensure proper operation, please change battery accordingly when signaled.