Manualshelf

User Guide

ManualsBrandsMedLite ID ManualsElectronicsPrimary Medication Line Safety Device
123
Open Here
1
3
Light on = ok to use
Primary Medication Line Safety Device
FOR PATIENT SAFETY this product is intended for use
with primary medication line only.
Attach MedLite ID to primary medication
line prior to connecting IV to patient.
Inspect tubing for twists or kinks,
then close the clamshell door until it clicks.
Open the MedLite ID
package and remove the
three devices from the pack.
Removing plastic strip will
activate device.
Warning !
xxxxxxxxxxxxxx
YYYY-MM-DD
UPC
QTY: 3
REF
LOT
Manufactured for
MedLite ID
UT USA
Manufactured by ATL
XXXX (location)
2
4
Press one of the attached devices
to activate the lights for all three
devices within a given set.
Single Use
NON
STERILE
Prior to connecting the primary medication
line to the patient, apply MedLite ID devices
(see figure) by running the infusion tubing
through the tubing grooves on the device.
To maintain proper flow
check for pinched or
twisted tubing before
closing clamshell.
Warning !
Drip chamber
IV bag
Patient
Placement
Guide
Below infusion
pump or middle of
IV line if gravity set
Venous access
catheter
1
2
3

Summary of content (3 pages)