BC800 3G Body Weight Scale Instruction Manual
BC800 3G Summary Instruction Manual Package contents Display Indicators Operating Instructions Important Safety Information Specification
Read the instruction manual before using the device Intended use: The Body Weight Scale BC800 3G is a digital monitor for home/domestic use which measures weight of persons 18 years of age or more. Display Indicators Time (hh:mm) Date (dd:mm:yyyy) Telecom signal strength Data send in progress Data send status * Package contents Units * Data sent successfully Data send failure Body Weight Scale BC800 3G 4x1.5V AAA Alkaline batteries 1.
Important Safety Information 2. Operating Instructions 01 Place the scale on a hard, flat surface. 02 Step on the scale and remain still during measurement. 03 When the “data send in progress” indicator is displayed, the data is being sent and you may step off the scale. 04 After a period of time, the data send status will be displayed. If it shows a “data send failure”, move the scale to a new location and try again. Notes → Weight measurements are possible with shoes and socks on.
→ EBM Technologies Inc. will provide circuit diagrams, component part lists, descriptions, calibration instructions to assist to service personnel in parts repair. → 300 Measurements (Info: the Battery life depends on the used batteries. → The time required for scale to warm from -25oC between uses until scale is ready for its intended use when the ambient temperature is 20oC is 2 hours.
FCC compliance statement FCC SAR statement changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End user must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Specification Symbol Description Sensors High precision strain gauge sensors Maximum Capacity 180 kg / 396 lbs / 28.3 st Increments 0.1 kg / 0.2 lbs / 0.
Manufacturer EBM Technologies Inc. 5F. No. 516 Sec. 1 Neihu Road Taipei, Taiwan Distribution by Medisante’ USA, Inc. Suite 14A, 2077 Center Avenue +1 973-851-6874 https://www.medisante-group.com/ Dennis.lottero@medisante-group.com Instruction Manual - Version 4, 2020/06 © 2017 Medisanté. All rights reserved.
