User Manual P5255 M20;P5255 M40
Revision: R00 (2/2010) Trademarks All brand and product names are trademarks or registered trademarks of their respective companies. Disclaimer Specifications and documents are subject to change without notice.
Table of Contents Getting to know your device............................................................................................................................ 2 Performing the initial start-up ......................................................................................................................... 3 Charging the battery..........................................................................................................................................
Performing the initial start-up 1. For the initial start-up, press the power button until the device turns on. 2. Your device turns on. Note: The battery may not be fully charged when you use your device for the first time. To charge the battery, see the next section. 3. Follow the prompts.
Charging the battery 1. Plug the converter to the AC charger ( ). 2. Connect the DC end of the AC charger to the power connector on your Mio ( ). 3. Plug the other end of the AC charger into a wall outlet ( ). The charge indicator glows amber when charging is in progress. When the battery is fully charged, the indicator turns green. CAUTION: For optimal performance of the lithium battery: Do not charge the battery where the temperature is high (e.g. in direct sunlight).
Using your device in a vehicle CAUTION: Select an appropriate location for mounting the device in a vehicle. Never place the device where the driver’s field of vision is blocked. If the car’s windscreen is tinted with a reflective coating, it may be athermic and impact the GPS reception. In this instance, please mount your device where there is a “clear area.” To protect your device against sudden surges in current, connect the car charger only after the car engine has been started.
Operating basics Turning on and off Turn on or off your device by pressing the power button. Navigating on the screen To operate your device, touch the screen with your fingertip. You can perform the following actions: 6 Tap Touch the screen once with your fingertip to open items or select onscreen buttons or options. Drag Hold your fingertip on the screen and drag up/down/left/right or across the screen. (This is not supported by all applications.
Reference Inserting a memory card CAUTION: Do not apply pressure to the centre of the memory card. Hold the card (SD or MMC) by the edges and gently insert it into the slot with the label facing the back of the device. To remove a card, gently push the top edge of the card inwards to release it, and pull it out of the slot. Troubleshooting Note: If you encounter a problem you cannot solve, contact an authorized service center for assistance.
Caring for your device Taking good care of your device will ensure trouble-free operation and reduce the risk of damage to your device. Keep your device away from excessive moisture and extreme temperatures. Avoid exposing your device to direct sunlight or strong ultraviolet light for extended periods of time. Do not place anything on top of your device or drop objects on your device. Do not drop your device or subject it to severe shock.
Safety precautions Never attempt to disassemble, repair or make any modifications to your device. Disassembly, modification or any attempt at repair could cause damage to your device and even bodily injury or property damage and will void the warranty. About charging Use only the charger supplied with your device. Use of another type of charger will result in malfunction and/or danger.