Taking pictures
± ± ± ±
FCC This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Caution: The user is cautioned that changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
*2 For the regions where the rated voltage is 220 V or greater, this device complies with this standard. For the regions where the rated voltage is 127 V or less, this standard is not applicable. Guidance and manufacturer's declaration - electromagnetic immunity The device is intended for use in the electromagnetic environment specified below. The customer or the user of the device should assure that it is used in such an environment.
Guidance and manufacturer's declaration - electromagnetic immunity The device is intended for use in the electromagnetic environment specified below. The customer or the user of the device should assure that it is used in such an environment. Immunity test Conducted RF IEC 61000-4-6 IEC 60601 test level 3 Vrms at 0.15 80 MHz & 6V at ISM Frequency Compliance level 3 Vrms at 0.
745 780 810 Test specifications for enclosure port immunity to RF wireless communications equipment 217 Hz 800-960 GSM 800/900, TETRA800, i DEN 820, Pulse modulationb 18 Hz CDMA 850, LTE Band 5 1700-1990 GSM 1800; CDMA 1900; GSM 1900; DECT; LTE Band 1,3,4,25; UMTS 870 930 1720 2 0.3 28 2 0.3 28 2 0.3 28 0.2 0.3 9 Pulse modulationb 217 Hz 1845 1970 2450 2400-2570 Bluetooth, WLAN, 802.11 b/g/n, RFID 2450, LTE Band 7 5100-5800 WLAN 802.