[Bluetooth setting] User can turn on the Bluetooth function and collect the data from specific vital sign devices. Le Wilting Toothbrush setting : ee When the Bluetooth is on, the vital sign collection icon will be shown on menu.
D. DAR 100 Enter the Setup model Using the [Setup] menu it is recommended that all setting items are set according to user's requirements for first-time use. Bring up the [Setup] menu Touch the photo icon and then touch the setup icon. Exit the [Setup] menu Once a setting adjustment is made, the new value affects the system immediately. Use the upper back button or the OK button to exit the screen. Li ii a Settings [Standby] User can set standby mode off.
[Date Setting] User can change the current date setting from the screen. Date Getting [Time Setting] User can change the current time setting from the screen. fut] When you connect DAR 100 to a computer via USB cable, the product works as a USB storage device. If UVC mode is on, pictures can be shown both on the LCD panel of the product and the screen of the computer. To display image on the computer, please install webcam application prior to enabling UVC mode.
[Format SD Card] User can format the SD card. oe Ee Factory Setting NOTE All information will be deleted after SD card is formatted. [Bic Om] Export image with or without DI COM format.
Wireless connection User can turn on/off the WI-FifBluetooth. ee Wir sorting setting Wie rosy ree WE ut in Withstand suiting WE ag Touchstones setting Note WiFi and Bluetooth function cannot be-rota the same lime. [WI-Fisetting Direct Mode] User can select "Direct mode” to connect DSC 300 with PO directly be LL ia Bias mode AL ise Lusitania bating i oi tu Dis nie Puss Note Password shall be 8+ letters & numbers.
[WI-Fi setting ~ AP Mode] User can select “AP mode” to connect to internet through an AP. td vit Pest seem tks eating raw [Bluetooth setting] User can turn on the Bluetooth function and collect the data from specific vital sign devices. West sating Shana sting When the Bluetooth is on, the vital sign collection icon will be shown on menu. Click it to enter the collection page.
Entering the patient ID Using patient ID as partial file name is supported in DSC 300. File naming rule Eye funds DEC 200 ELOHIM MSS.jpg jpg camera OHMMETERS. jpg jpg Eye anterior DEA 200 ALGORITHMS. jpg jpg camera ARCHAISMS. jpg Eye surface DGC 200 GLHHMMSS. jpg jog camera GRAHAMS.
Pe Create a new patient ID from scratch {DI COM on} By gently pressing the OK button, the user always goes back to a shooting mode, either photo or video mode; from the top information icons, tap to start the process. Eating (0 Lust noun i Birth bate Montevideo fe amaze.
Lone aa Lat name aE Gina Le el fender NOTE All of the information are necessary to finish this step. Create a new patient ID on an existing one After a patient ID Is set, the user can quickly create a new patient ID that is based on the existing ID plus 1 e.g, ABCDE12345 -» ABCDE12346.
Taking pictures Sequence of operations A. DEC 200 Step 1: Turn on the power Press the power button fo turn on the control unit. Approximately one to two seconds later, the boot screen will appear on the LCD panel.
When user moves IR spot into this frame, auto-shooting will be trigger and a picture will be captured automatically. Notes If is difficult to activate auto shooting, there ate Options: 1. Completely press Qk button to photograph. 2. By using maladjustment buttons of the control unit, £ skis ER it ig switched to manual spasmodic After optimizing an image vis maladjustment buttons, completely press OK button to takes photo.
B. DEA 200 Step 1: Turn on the power Press the power button to turn on the control unit. Approximately one to two seconds later, the boot screen will appear on the LCD panel. After about 15 seconds, the information icons will appear on the top of the LCD panel. Step 2: Make sure SD card Is inserted Once the SD card has been inserted, the user can start to take photographs in any shooting mode, either photo or video mode.
C. DGC 200 Step 1: Turn on the power Press the power button to turn on the control unit. Approximately one to two seconds later, the boot screen will appear on the LCD panel. After about 15 seconds, the information icons will appear on the top of the LCD panel. Step 2: Make sure SD card Is inserted Once the SD card has been inserted, the user can start to take photographs in any shooting mode, either photo or video mode.
D. DAR 100 Step 1: Turn on the power Press the power button to turn on the control unit. Approximately one to two seconds later, the boot screen will appear on the LCD panel. After about 15 seconds, the information icons will appear on the top of the LCD panel. Step 2: Make sure SD card Is inserted Once the SD card has been inserted, the user can start to take photographs in any shooting mode or photo mode. Step 3: Choose a shooting mode Tap the photo mode icon to enter a shooting mode.
Entering the patient ID Using patient ID as partial file name is supported in DSC 300P. Create a new patient ID from scratch (DI COM off) By gently pressing the OK button, the user always goes back to a shooting mode, either photo or video mode; from the top information icons, tap to start the process.
Patient iD Trg ie oe Ben Henderson UE Ce Le Fae fates Ln Gender Create a new patient ID on an existing one After a patient ID is set, the user can quickly create a new patient ID that is based on the existing ID plus 1 e.
Photo mode The device's default setting is “photo mode.” User can take a picture or video in “photo mode” or “video mode,” respectively, Photo mode: For DEC 200, the default setting of “Aiming Light/Capture Light” is “IR/White LED”. Therefore, the image before pressing the OK button is monochrome color. When a picture is just taken, the screen shows the result image in full color in auto review mode. To leave auto review, gently press the OK button.
Video mode Video mode: Completely press the OK button to start recording. Press again to end recording. For DEC 200, the default setting of “Aiming Light/Capture Light” is “IR/White LED.” During the video shooting, user can press “the brightness adjustment key +” to enhance the white LED for two seconds. it helps capture brighter motion pictures within a video. NOTE When recording videos, please do not remove or insert the SD card and delete pictures, otherwise the system will be abnormal.
Fixation selling and holding position of DEC 200 Examination conditions After the optical lens is attached to the control unit and setup is complete, the user can start taking images. Approaches for taking the image of human eye funds are as follows: » Have the examiner stay in <5 lux dark room; in such an environment, a newspaper is nearly impossible to see. Remove the patient's glasses or contact lenses.