Assembling {Take Digital Eye Funds Camera as an example.) Ste 1 Align the marks of the optical lens and control unit. Mark on the « optical lens Ste Hold the optical lens and attachment the control unit. Rotate and fasten the optical lens in a counterclockwise, You will hear a click when the tans locks into the control ul. Era Zorro the power When optical lens. and control unitary assembled corset, the information con swill appear.
DEADPAN Forehead stopper assembly Structure of forehead Stopper Screw B Rubber pad fr Screw A ii griffin axis Shaft Shaft circle hole Forehead stopper hole Step 1: Rolling the inner axis.and the shaft to find cut forehead stopper hole.
Using the Setup mode Turn on the power To turn on the system, press the power button to turn on the control unit. Approximate-l one to two seconds later, the boot screen will appear on the LCD panel. © More LORENE mig] we Abn Note: When below conditions occur, user needs to turn off the power and reassemble the optical lens and control unit. 1. Optical lens isn’t correctly assembled to the control unit. — When turning on the device, the device stays at boot screen and can't enter to control interface. 2.
Once a setting adjustment is made, the new value affects the system immediately. Use the upper back button or the OK button to exit the screen. Settings [Aiming Lightweight Light] The default setting of [Aiming Light/Capture Light] is [whitener LED]. In the setting, DEC 200 employs IR illumination for alignment and focusing to assure patient comfort. With IR, the user observes funds images mono chromatically. At the moment of pressing the shutter button, the system will turn on the white LED instantly.
User can set standby mode off. Once the mode Is on, the LCD panel will be turned off if the system is idle for three minutes. Tap on the item to toggle the setting. Standby Sandy ats Suiting Hin sun EVE Resin £3 invasion [Date Setting] Interchangeable current fete setting from the screen. [Time Setting} User car change the current ts setting from the serener, {uve While connecting DEC 200 to a computer via USB cable, the product works as a USB storage device.
[Factory Setting] User can recover the device to its factory settings. uve Quality check [Format SE Cord} User can format the Seward: Quality Bits es NOTE Misinformation be deleted after Cardies formatted. [Red Fred Function} BEC 200 allows digital red Roe niggles 10 be created directly from the information of epithelial color mage; Aiming Light | attn wo Brouhaha ae Co After turn on red free function, it will take more than 3 seconds to do image process after shooting.
[WI-Fi setting — AP Mode] User can select “AP mode” to connect to internet through an AP. E wir et aan a ane [Phototypesetting] Cantankerous on the: Bluetooth function and collect the data from specific vital sign devices. ‘When the Bluetooth ion, the vital sirs collection-icon-will be-shown on menu. Click it to enter wo WEL Meter Loudmouths strain the collection page.
B. DEA 200 Enter the Setup model Using the [Setup] menu it is recommended that all setting items are set according to user's requirements for first-time use. Bring up the [Setup] menu Touch the photo icon and then touch the setup icon. na Exit the [Setup] menu Once a setting adjustment is made, the new value affects the system immediately. Use the upper back button or the OK button to exit the screen.
[Exposure time/Color] User can adjust Exposure time/Color setting by touching the corresponding column 1. Exposure time from 1/30” to 1/120”. (Default: 1/60”) 2. Color adjusting range from 0 to 20. (Default: R:3, B: mg [Standby] User can set standby mode £6:Eé on or off. Once the mode is on, the LCD panel will be turned off if the system is isle for three minutes. Tap on the item to toggle the setting. Standby Date Setting [Date Setting] User can change the current date setting from the screen.
[Time Setting] User can change the current time setting from the screen. uve While connecting DEA 20010 a computer viz USS cable, productiveness as a USB storage device. If UVC mode ion, pictures-can be shown both-on the LCD panel of the product and the screen of the computer To display image on supercomputer, please install webcam application prior to enabling UVC made, 8 freeware camellia application Horus UVE view; Amicaplisisoftnsre that aan receive UVC signal on the computer.
[Format SD Card] User can format the SD card. GE Ne Factory Setting NOTE All information will be deleted after SD card is formatted.
[WI-Fi setting — AP Mode] User can select “AP mode” to connect to internet through an AP. by Wir Etta aan oC i ane [Bluetooth setting] User can turn on the: Bluetooth function and collect the data from specific vital sign devices. BRE netting SLE setting co . Visa seating Char the Bluetooth i on, the vital sign collection icon will be shown on menu. Click it to enter the collection page.
C. DGC 200 Enter the Setup model Using the [Setup] menu it is recommended that all setting items are set according to user's requirements for first-time use. Bring up the [Setup] menu Touch the photo icon and then touch the setup icon. Exit the [Setup] menu Once a setting adjustment is made, the new value affects the system immediately. Use the upper back button or the OK button to exit the screen. Time Setting Settings [AFFIRM Mode] User can set Auto Focus mode to help image focus when taking pictures.
[Standby] User can set standby mode off. Once the mode is on, the LCD panel will be turned off if the system is idle for three minutes. Tap on the item to toggle the setting. Tine Ratting [Date Setting] User can change the current date setting from the screen. Standby an Time Setting aR [Time Setting] User can change the current time setting from the screen. Date Getting .
{uva When you connect DGC 200 to a computer via USB cable, the product works as a USB storage device. If UVC mode is on, pictures can be shown both on the LCD panel of the product and the screen of the computer. To display image on the computer, please install webcam application prior to enabling UVC mode. A freeware webcam application Horus UVC view, Am cap) is a software that can receive UVC signal on the computer. User can search for relevant information over the Internet.
[picot] Export image with or without DI COM format, a ee _bi com ak al [Factory Setting] User can recover the device to its factory settings tin Format 50 Lard clues troy Setting Wireless connection [WI-FifBluetooth] User can turn on/off the Wetting Wr a Athabaskan setting ee Birthstone bating i ee Note 40
WI-Fi and Bluetooth function cannot be on at the same time. [WI-Fi setting — Direct Mode] User can select “Direct mode” to connect BSC 300 with PC directly. cd Lien ain AR ns Bluetooth st non 1h tq . Note Password shall be 8+ litters-& numbers. [WILE setting — AF Mode] Selectman “AP mote’ to courgette tenet thrash an AP.