User's Manual

1001/Seng-vital

User Manual

TURNING IT ON/OFF

Turn on: press the key button 1 time;

Turn off: press the key button 5 times in rapid succession within 2 seconds;

CHARGING THE BATTERY

Before usage, please let it charge for 2 or 3 hours. Battery sign on the screen is rolling, and lights

on the side roll as well.

How to use it?

1. Logo comes out when turning on, then verify user’s fingerprint.

2. Set Pain Level after fingerprint being verified successfully. If fingerprint is wrong, the

fingerprint sign is flashing to wait for a try again. You also have access to vaporizer by APP’s

command (SEND FINGERPRINT BYPASS: CMD 0X4A) to set Pain Level without fingerprint

authentication.

3. Set your right Pain Level by touch screen, then press key button to get into home page.

4. Connect Bluetooth successfully, there is a sign shown on the top right corner of screen.

5. Set date and time by APP

How to delete and record fingerprint?

1）Send 0x42 to vaporizer by APP;

2) “please enter the old fingerprint” show up;

3）Enter the old fingerprint, if verified successfully, screen get into home page; If failed, Screen keep

showing “please enter the old fingerprint”.

How to record fingerprint process?

1) Send 0x41 to vaporizer by APP;

2) “please enter the fingerprint five times” show up;

3) Enter the same fingerprint 5 times, screen record & display the correct times (eg. if 3 times are

correct, show 3)

4).If all 5 times are correct, screen get into home page;

6. Long press the key button 5 seconds, motor vibrates, and all lights on the side are on. Hold

the key button to start vape, but vape stops if loose the button. Screen record & display

vaping time (Over suction protection, Max. vaping time is 10 seconds) and vaping puffs.

7. All data synchronize and check with APP.

8. Set the pain level in the home page by slipping up/down the touch screen. Slip the touch

screen again to set the temperature. Press the key button to get into home page.

9. Vaporizer powers off without any movement within 5 minutes. Press the key button 5 times

within 2 seconds to turn off with motor vibrates. Need fingerprint to unlock for vaping.

10. Put dry pod inside the vaporizer, it automatically goes into dry herb mode. Set temperature

etc. parameter by APP.

PAGE 1
001/Seng-vital User Manual TURNING IT ON/OFF Turn on: press the key button 1 time; Turn off: press the key button 5 times in rapid succession within 2 seconds; CHARGING THE BATTERY Before usage, please let it charge for 2 or 3 hours. Battery sign on the screen is rolling, and lights on the side roll as well. How to use it? 1. Logo comes out when turning on, then verify user’s fingerprint. 2. Set Pain Level after fingerprint being verified successfully.
PAGE 2
11. Long press the key button, motor vibrates, and RED lights on the sides roll. OLED screen shows the current temperature, but if reach the setting temperature, Blue lights are on. 12. In the dry herb mode, press the key button, vaporizer comes to standby mode following with motor vibrates. Kit includes: 1x Vaporizer body (no pod and mouthpiece) 1x Wall charger 1x Micro USB charger 1x User Manual 1x Charging dock FCC STATEMENT : This device complies with Part 15 of the FCC Rules.