PocketECG IV DUAL CHANNEL Instructions For Use MEDICALGORITHMICS S.A. Aleje Jerozolimskie 81, 02-001 Warsaw, Poland e-mail: technical@medicalgorithmics.com web: www.medicalgorithmics.com 0197 January 10, 2019 | v. 3.
ENDED USE PocketECG transmitter is intended to acquire, yze, visualize, record or/and transmit the ECG acceleration data. The results of arrhythmia ST elevation detection are displayed, stored and transmitted along with the ECG signals. The eleration signals are analyzed in order to ermine the physical activity of the patient. It is umed that the device can further transmit the and acceleration signals along with analysis ults using available wireless technologies.
WARNING: Sources of electromagnetic radiation like: • portable and mobile radio frequency (RF) communications equipment (e.g. cellular phones, mobile radio), • radio frequency identification systems (RFID) devices using one or more of the following wireless technologies: o Wi-Fi (IEEE 802.11), o Bluetooth (IEEE 802.15), o ZigBee (IEEE 802.15.4), o WiMAX (IEEE 802.16), o Ant, etc., • Remove the battery from either the transmitter or charger before storing them.
ace the electrodes on the patient’s body and onnect the ECG cables of the PocketECG ansmitter as shown. 4. Reporting symptoms in a patient view ELECTROMAGNETIC & OTHER INTERFERENCES • Press the ‘Report Symptoms’ button. • Select observed symptom from the list. RED YELLOW GREEN WHITE BLACK RED • Indicate when symptoms occurred and then confirm your choice. • If you select wrong symptom, you can always modify it. Otherwise, the selected symptom is confirmed automatically after 5 seconds.
• When the main battery is being removed during an ongoing session, the transmitter operates continuously powered from the backup battery up to 1 minute. TIFICATIONS NOTIFICATION DESCRIPTION ACTION e device was turned off r over 12 hours. Would u like to continue onitoring? The PocketECG transmitter was turned off for over 12 hours. Make sure, that you have to stop or continue session, call a service provider. G Module Error The ECG module malfunction. Turn off and then turn on the device.
HNICAL PARAMETERS Model Type Powered by Wireless communication ower consumption Working time Input impedance CMRR Sampling rate Registered signal band Input dynamic range Acceptable constant component Dimensions Weight Temperature Relative humidity WARNINGS PocketECG IV Warning statements alert to situations which, if not avoided, could result in illness or injury of the patient. Specific warnings can also be found in other sections of this instructions for use. All of them should be obeyed.