Product Card

Step 1. While still in package, expose transmitting head of transmitter.

Step 2. Fold back both sides of foam programming head to expose programming

tab. Do not remove release liners.

Step 3. Insert tab into programming port on front of Vision base (see Illustration).

Once transmitter is inserted in programming port, system will

automatically provide instructions for finding correct screen

programming.

Step 4. Follow on screen programming instructions.

Step 5. After transmitter is programmed, remove from programming port.

Step 6. Write patient ID onto device in the space provided.

NOTE: To maximize battery life, DO NOT perform Steps 7 and 8 until you

are ready to begin patient monitoring.

Step 7. While still in package, remove release liners on both halves of

programming head.

Step 8. Close and press the foam programming head together to activate

transmitter.

Step 9. Remove transmitter from package, apply to patient.

Instructions for Programming the

PAM Transmitter

WARNING: Once programming of the transmitter is complete,

the patient's ID MUST be written on the transmitter to ensure

the vital signs correlate to that particular patient.

PAGE 1
Instructions for Programming the PAM Transmitter Step 1. While still in package, expose transmitting head of transmitter. Step 2. Fold back both sides of foam programming head to expose programming tab. Do not remove release liners. Step 3. Insert tab into programming port on front of Vision base (see Illustration). Once transmitter is inserted in programming port, system will automatically provide instructions for finding correct screen programming. Step 4. Follow on screen programming instructions.