FCC submission Product Manual October 21, 2004 Medic4All Ltd.
Medic4All TELEMEDICINE SOLUTIONS MedicGate™ - VMG 02 Vital Signs Monitoring PSTN Gateway Operation Manual Overview The MedicGate™ is the home gateway for the Medic4All telemedicine system. The MedicGate™ collects and stores the measurement data from Medic4All’s medical monitoring products via wireless communication and transfers the data to a medical monitoring center via telephone lines.
Warnings & Precautions ♦ Consult your local provider concerning any operational difficulties. Do not attempt to repair the MedicGate™ on your own. Any modifications made to the equipment void the device warranty and service contract obligations. ♦ Keep the MedicGate™ away from electro-magnetic emitting devices. ♦ Do not store the MedicGate™ in direct sunlight, at a high temperature, or in a location with excessive humidity. ♦ Avoid any mechanical shock to the MedicGate™ such as a harsh drop.
Parts Identification Speakerphone LED Indicator Call Button End-Of-Call-Button Microphone Telephone Call Originated From the Monitoring Center The medical monitoring center operator originates the call to the user home. ♦ Answer the telephone call from any telephone at home like any other telephone call.
Telephone Call Originated From the User In case you want to place a call to the medical monitoring center. ♦ Press the red Call button on the MedicGate™ or generate a distress alarm from the MiniClinic™. ♦ The MedicGate™ dials the medical monitoring center. The unit speakerphone will be activated and you will hear the progress of the telephone call. The MedicGate™ green LED will blink rapidly.
Improper installation of the batteries may cause battery leakage. Do not mix used and new batteries, it may result in damage to the device or shorten battery life. Use only batteries that match the requirements specified in the Specifications section. Please take the batteries out if the device is not used for a long period (app. 2 months or more) Disposal of this product and used batteries should be carried out in accordance with the relevant national regulations.
Handling Fault Conditions ♦ If configured to do so by the medical monitoring center the MedicGate™ can detect that the telephone line is not connected, the LED becomes red and the MedicGate™ beeps twice every 120 seconds. Please call the monitoring center and report this condition. ♦ If configured to do so by the medical monitoring center the MedicGate™ can beep after receiving a medical measurement.
Complies with the CE standard under the Euro Medical Device Directive. FCC Part 15 Information This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
If this equipment causes harm to the telephone network, the telephone company will notify you in advance that temporary discontinuance of service may be required. But if advance notice isn't practical, the telephone company will notify the customer as soon as possible. Also, you will be advised of your right to file a complaint with the FCC if you believe it is necessary.
Contents 1. 4 x 1.2V 1800 mAH NiMH rechargeable batteries 2. Power Supply 3. Operation Manual 4. 2 x A Telephone cable (RJ11 - RJ11) 5. Wall mount 6. MedicGate™ Warranty This product is warranted against defects in material and workmanship beginning from the date of shipment for a period of one year (the “Term”).