PORTABLE Digital Drum
Congratulations! Thank you for purchasing this Portable Digital Drum, The Digital Drum is developed to act and play like a drum but with greater ease. Before you use the instrument, we recommend you to read through this manual. Taking Care of Your Portable Digital Drum Your Digital Drum will give you years of playing pleasure if you follow the rules shown below: Location Handling and Transport Do not expose the unit to the following conditions to avoid deformation, discoloration, or more serious damage.
Contents Panel Controls - Top Panel - Rear Panel Operation - Select a Drum Kit - Set Pad Voice - Set pad volume - Set pad pan - Set pad gain - Save Kit - Play Song - Main Volume - Accompaniment Volume - Drum Off - Tempo - Metronome - Hand Percussion - Demo - Reverb - Record - Playback Input and Output - Pedals - Phones output - USB jack Appendix - Voice list - Kits list - Song list MIDI implementation chart Specifications 4-5 4 5 6 6 6 6 7 8 8 9 9 9 9 10 10 10 10 11 11 11 12 12 12 12 13 13-14 15 15-16 17 1
Setting up Power Supply Your digital drum will run on either batteries or power adaptor. Follow the instructions below according to Using an AC- Adaptor Do not use adaptors other than the one specified. The technical specification of the adaptor is DC 12V output, center positive type. Using Batteries Power will be automatically drawn from the AC adaptor if an optional AC adaptor is connected while batteries are installed in the instrument.
Panel Controls Top panel 5 6 7 8 9 1 18 15 19 3 10 11 12 14 16 13 17 Drum pad (x7) Control panel 4 2 20 21 22 1.power on---off This switch turns power on/off. 2.tempo + & - 10.kit These buttons are used to change current tempo. This button is used to enter kit menu. 3.master volume + & - 11.pad assign These buttons can be used to change the master volumes. This button is used to enter voice or volume menu. 4.acc. Volume + & - 12.song This button is used to enter song menu.
19.reverb This button is used to change the reverb level. 20.dial This button can be used to change values (kit number, voice number, song number, etc.) when editing. 21.demo This button can be used to start or stop demo song playing. 22.gain This button can be used to change the gain of pad. Rear Panel 23 PHONES 24 KICK 25 HI HAT USB 23.Phones jack This jack is used to connect with headphones 24.Pedal input jacks Kick and hi-hat pedal input jacks. 25.
Operation Select a Drum Kit Kit menu is the default menu after power on, default value is 001. Press [kit] button to enter kit menu. The 3-digit LED will show the current kit number with the corresponding menu indicator lit up. The button select [+] / [-] or [dial] can be used to select any kit (1-30, loop) as current kit. Set Pad Voice Press [ pad assign ] button to enter pad assign menu. Default value will be the voice value of crash pad based on different kit selected.
Set pad pan Press [pan] button to enter pad assign menu. If pad assign menu is selected, the corresponding menu indicator will be lit up. In this menu, the 3-digit LED will show the pan of current pad, which can be selected by pressing pad button on the top panel or by pad hitting. The button select [+] / [ -] or [ dial ] can be used to select the pan ( 0-9, loop ) for current pad.
Set pad gain Press [gain] button to enter pad assign menu. If pad assign menu is selected, the corresponding menu indicator will be lit up. In this menu, the 3-digit LED will show the gain of current pad, which can be selected by pressing pad assign button on the top panel or by pad hitting. The button select [+] / [-] or [ dial ] can be used to select the gain (0-9, loop) for current pad. Save Kit Press [save] button to enter the kit save menu.
Play Song Press [song] button to enter song menu. Default value is 001, The 3-digit LED will show current song number with corresponding menu indicator lit up. The button select [+]/[-] or [dial] can be used to select current song ( 1-100, loop ). First 80 styles are loop playing. Press [ start / stop ] to start or stop the song player. If song is switched while it's playing, the new song will not start until the end of current measure.
Tempo Press the tempo [+] and [-] button to enter the tempo menu.Button [+] and [-] can be used to change current tempo ( 30-280, not loop ), which affects the speed of clicking, and song playing. Press both [+] and [-] will reset current tempo to its default value (current song tempo). Metronome The metronome will run once a song is playing but with only indicator flashing. Press once on [ click ] button for human voice counting. Press twice on [click] for clicking sound.
Reverb Press [ reverb ] button to enter reverb function. In this menu, the digit on far left of LED will display letter 'R'. The two digits on the right will display current reverb level. The button select [+] / [-] or [dial] can be used to adjust the reverb level (0-3, not loop). This value will be autosaved after adjusted. Record Prepare to Record Select the desired song, drum kit, tempo, drum off setting, and reverb settings. Start Recording Press the [rec] button, the light start flashing.
Input and Output Pedals this appliance supports 1 hi-hat pedal and 1 kick pedal as input device. PHONES KICK HI HAT USB 12V Phones output The phones output supports a stereo headphones as output device. PHONES USB jack this appliance will output all the MIDI codes generated by pads hitting or pedal stepping via the MIDI output connector. clicking and the MIDI codes in songs are excluded. It's also receive the MIDI data from external device.
Appendix Voice list NO... NAME NO.. NAME NO..
NO... NAME NO.. NAME NO..
Kits list NO. NAME NO. NAME 01 Pop1 16 Jazz2 02 Pop2 17 Funk 03 Standard 1 18 Clave 04 Room 19 Drum Bass 05 Rock 1 20 Hip Hop 06 Electronic 21 Conga1 07 Analog 22 Conga2 08 Jazz 1 23 Timbales 09 Brush 24 Latin 10 Standard 2 25 Funk 11 Rock2 26 User 1 (pop1) 12 Boss 27 User 2 (pop2) 13 Rock3 28 User 3 (Standard1) 14 Standard 3 29 User 4 (Room) 15 Rock4 30 User 5 (Rock1) Song list NO.. KIT NAME BEAT Intro 01 01 Intro 4/4 8 Beat NO..
NO.. KIT NAME NO..
MIDI Implementation Chart Function Transmitted 10ch Basic Channel Default Changed Mode Default Messages Altered Note Number : True voice Velocity : Note on Note off After Touch Recognized 1-16ch 1 *********** 27-88 *********** O 9nH,V=1-127 (9nH,V=0 0 0 key's Ch's O Control Common System Common O O O O O O O O O O O O O O O O O O 0 1 5 7 10 11 20 64 65 66 67 80 81 91 93 120 121 123 Bank select Modulation Portamento time Volume Pan Expression Rhythm allocation Sustain Pedal Portamento on/off S
Specifications Main features: 7 drum pads with touch sensitivity and two pedals (kick and hi-hat) 3-digit LED displays 1 phones output and 1 USB jack (MIDI IN/OUT). 25 preset drum kits,5 user drum kits. 215 percussion voices and 128 GM voices, 8M bytes voice data 100 songs (include 80 styles and 20 songs). 1 demo song 1 track recording Hand-percussion: use your hand to strike pads. Metronome: 2 different voices. Dimensions: 500(L) Net Weight: 3.3kg 370(W) 157.
Art: DD305 Version:017
