Product Info

Charging Case Information

 Charging Case Battery Status LED

 green - fully charged

 blue - charging

 red - low battery

 off - not charging

 Hearing Aid Battery Status LED

 green - fully charged

 blue - charging

 flashing red - not inserted correctly

 off - not charging

 Special Note: When Hearing aid is in the charger it will enter the low-power "deep sleep"

mode.

Volume Dial

 rotate up - increase volume until max is hit

 rotate down - decrease volume until min is hit

Program Button

 press once to change to next program

 when the max program is hit next button press rolls over to first program

Special Switch Combinations

 press Program Button for 5s to enter the low-power "deep sleep" mode

 press & hold Program Button while rotating the Volume Dial down 10

times to initiate a hardware reset



PAGE 1
Charging Case Information  Charging Case Battery Status LED  green - fully charged  blue - charging  red - low battery  off - not charging  Hearing Aid Battery Status LED  green - fully charged  blue - charging  flashing red - not inserted correctly  off - not charging  Special Note: When Hearing aid is in the charger it will enter the low-power "deep sleep" mode.
PAGE 2
PAGE 3
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.