Quick Start Guide

McINTOSH RS250 QUICK START CONNECTION GUIDE
Making a Bluetooth Connection
1. On initial startup or after a
factory reset, the RS250 will
automatically power on, and
the BT light above the left knob
will be blinking. If it's not, press
and hold the left knob for two
seconds until it begins to blink.
This will initiate the RS250
pairing mode.
2. On the device you want to
pair with your RS250 (such as a
phone, tablet, or computer), enter
its Bluetooth menu and scan for
devices, looking for the RS250.
If the unit doesn't appear, be sure
the RS250's BT light is blinking,
your other device's Bluetooth
functionality is enabled, and that it is actively
scanning.
3. Select the RS250 from the devices to pair with. The
device you're using may ask you to acknowledge or
confirm the pairing. If you're unable to pair, power
off the RS250 by unplugging it from power, plugging
it back in, and powering it on by pressing in the right
knob. Also, restart your other device and repeat these
steps as needed.
4. Verify that the BT light on the RS250 appears solid
(not blinking) and your other device shows that it is
paired with the RS250.
The devices are now paired, and sound will now play
through your RS250. You can also control the volume
of the RS250 with your other device.
Using an iOS Device (via iOS Settings)
Setting your product as an AirPlay Speaker will
connect it to your Wi-Fi network.
1. Open Settings on your iOS device.
2. Open the Wi-Fi submenu.
3. Look at the Wi-Fi network list and find "Set Up
New Airplay Speaker".
4. Select the RS250.
5. Verify the connection light
on the RS250 is solid.
The RS250 is now connected to the network.
Using an iOS Device (via Apple Home)
1. Open the Apple Home app on your iOS device.
2. Touch the + icone and add a new accessory. A
window will open to scan a product code.
3. Touch "More Options". A window opens and shows
available products to add.
4. Select the RS250.
5. Confirm the network to connect to and provide a
custom name and location for the RS250.
Note: The custom name cannot be changed once you
have selected one unless you reset the RS250 and
start again.
6. Verify the connection light on the RS250 is solid.
The RS250 is now connected to the network.
Using Google Chromecast
1. Open the Google Home app on your Chromecast
Device.
2. Tap the + at the top of the app screen.
3. Go through the selection of device type and home
location. The app will identify the RS250 as available
to connect to.
4. Confirm you wish to connect the RS250.
5. The app will play a tone through your product.
Confirm if it can be heard.
6. Provi
de a location for the RS250.
7. Confirm the network you wish to connect to.
Google Home will complete the connection.
8. After a short time, verify the connection light on
the RS250 is solid.
The RS250 is now connected to the network.
Using Wired Ethernet
1. Simply attach the RS250 to the network via an
ethernet cable and verify the connection light
appears solid.
The RS250 is now connected to the network.
Note: If you plan on using a wired ethernet connection
for online music streaming, ensure that your
wired network has internet connectivity.
Getting Started
This guide will help you start listening to music through your RS250 as quickly as possible while you peruse the owner's manual and complete your setup. You can do this by
connecting a device directly to the RS250 using Bluetooth, or by using a separate device to connect the RS250 to a home network. Consult the owner's manual to ensure your
device meets the minimum requirements. Be advised that online streaming services such as Spotify, Tidal, Roon, or others may require an internet connection.
Connect to a Home Network
Note: When attempting to connect your unit to a network, be sure the connection light below the left knob is
blinking. If it is solid, it is already connected to a network. Be sure the device you are using to connect the RS250
to a network is on the same network you intend to connect the RS250 to.
250