User's Guide

User Guide
Congratulations on your purchase of the MB10 HD Bluetooth
Receiver / Audio Player!
The following pages explain the features and operations of MB10
HD. Please take a few moments to read this user guide.
Also read all safety instructions before proceeding. The answers to
most set up and performance questions can be found in this guide.
In the Box
1) MB10 HD
2) Optical Cable
3) USB-mirco USB Cable
4) USB Power Adapter
5) RCA Stereo to RCA Stereo Audio Cables
6) 3.5mm to RCA Mono Audio Cable
7) Microfiber Bag
8) User Guide
Overview
Enjoy a limitless universe of high definition digital music through
your existing Hi-Fi audio system. The receiver streams the highest
quality audio wirelessly from your Bluetooth enabled device to any
music system or powered speakers. The receiver is a true high
fidelity component that uses high-end aptX/AAC audio streaming
codecs and audiophile grade DAC to unleash all the clarity,
crispness and full emotional impact your Hi-Fi stereo system can
deliver. Unlike standard Bluetooth receivers, the receiver provides
ultimate wireless freedom with the longest wireless range.
1
Key and parts
1) Antenna
2) Power / Pair button
3) 3.5mm stereo output (for RS100)
4) Analog stereo audio output
5) Toslink 24-bit optical output
6) DC power input
Front Panel
1
2
3
2
Rear Panel

456
Quick Setup
Setup and pairing is really easy. The following instructions will
help you connect the receiver to your music system and pair
with your tablet, computer or smartphone.
Step 1: Connect audio cables from the receiver rear panel to your
music system audio input. (for stereo output)
Or Connect audio cable from the receiver front panel to your music
system audio input. (for mono output)
3
Step 2: Connect a power adapter to the receiver with the include
power supply cable and plug the power adapter into an AC outlet.
The receiver will automatically go into pair mode. The LED light will
start flashing to indicate the unit is now ready to be paired.
Step 3: Turn ON Bluetooth on your device and go to Bluetooth
preferences.
Step 4: Scan listed Bluetooth devices and select “MB10 HD” to
pair and connect. The LED indicator should turn solid.
Step 5: Make sure your Hi-Fi audio system is turned on and the
proper input source is selected.
Step 6: The music on your smart device will now play through your
Hi-Fi audio system!
Repeat Steps 3 to 6 to add additional devices. The receiver can
connect to one smart device at a time, but is capable of
remember-ing up to 8 devices. Double-press the Power /Pair
button until the indicator starts flashing once to disconnect the
receiver from a paired device and put it back into pairing mode.
Remark: The pairing mode will keep 2 minutes, the MB10 HD will
turn to standby mode after 2 minutes. If you want to turn to the
pairing mode again, please simply press the Power/Pair button
once.
Troubleshooting tips
How to power ON/OFF the receiver without unplugging.
To power off: Press and hold the Power/Pair button about 2
seconds until the indicator switches off.
To Power on: Simple press the Power / Pair button once.
Clear the pairing list: Turn the Bluetooth receiver MB10 HD off, then
press and hold the Power/Pair button for about 10 seconds until the
LED flashes blue once.
The receiver is connected but the LED indicator does not light up.
Confirm that the power adapter is connected to the receiver with
the included USB cable and plugged into a functioning AC outlet.
My device does not pair with the receiver.
Ensure that Bluetooth is turned ON on your device. Make sure that
the LED indicator is blinking and your device is within the receiver’s
wireless range of 30 meters (100 feet).
The LED Indicators is solid, but I cannot connect my device.
Check whether no other devices are connected. If so, either
disconnect or turn off Bluetooth on the other devices or press and
hold the Power/Pair button till it flashes, then try connecting.
Try unpairing and repairing your device to the receiver.
Power cycle the receiver by disconnecting and reconnecting the
power cable.
The LED indicator is solid and my device is connected but
there is no audio output.
Ensure that the receiver output is correctly connected to your audio
system. Check whether the audio source is correctly selected on
your music system (analog audio or digital optical input).
Verify the volume levels on your computer OS and player App. Try
unpairing and repairing your device to the receiver.
Power cycle the receiver by disconnecting and reconnecting the
power cable.
4
5
The volume output level from the receiver is Low.
Verify the volume levels on your computer OS and player App.
Also check the volume levels on your powered speakers or stereo
system.
The sound quality is poor and/ or the audio is cutting out.
Move your device or the receiver away from cordless phones,
routers, microwave ovens or other Bluetooth devices.
Try moving your device closer to the receiver.
Try another location.
Turn off your device’s Wi-Fi.
Try unpairing and repairing your device to the receiver.
Power cycle the receiver by disconnecting and reconnecting the
power cable.
Check that your device’s OS is updated to the latest version.
Only one channel plays music.
Check the cables between the receiver and your stereo system.
Check your music player App and/or OS audio controls to ensure
that the audio balance is centered.
Technical Specifications
Bluetooth Version
Supported Codecs
Bluetooth Range
Input
Outputs
Input Power
Output Voltage
Output Impedance
D/A Converter
Frequency Response
Signal to Noise Ratio
5.0 with aptX HD, aptX Low latency, aptX
aptX, AAC,SBC
30 meters, 100 feet
Bluetooth
Digital Optical (SPDIF)
5V, 200mA
2 Volts RMS
500Ohms
PCM5102A
10Hz – 20kHz (+/- 0.5dB)
112dB
Total Harmonic Distortion +Noise-93dB
Latency
Enclosure
~30 milliseconds (ms)
Aluminum
Product Safety
When used in the directed manner, this unit has been designed and
manufactured to ensure your personal safety. Improper use of this
product can result in potential electrical shock or fire hazards.
Please read all safety and operating instructions carefully before
installation and use. Keep these instruction handy for future
reference.
6
7
Users of this product are cautioned not to make modifications or
changes that are not approved by our company. Doing so may void
the compliance of this product and may result in the loss of the
user’s authority to operate the equipment.
Safety instructions
*Keep product dry to avoid affecting the interior circuitry of the
product.
*Don’t put the product in direct sunlight or place in hot areas.
*High temperature will shorten the life of electronic device.
*Don’t expose to extreme temperatures, it may damage the internal
circuit board.
*Don’t take the product apart or the warranty will be voided.
*Don’t drop the product.
*Don’t use chemical or detergent to clean the product.
*Due to isolating characteristic of the product, do not use the
product at excessive volume while driving or in any other activity
where failure to hear surrounding sounds could be dangerous.
*Using the product at excessive volumes may cause permanent
hearing damage. You can get the most out of your equipment and
enjoy great audio performance even at safe levels.
8
MB10 HD
Bluetooth Receiver / Audio Player
NOTE:
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses
andcan radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
interference to radio or television reception, which can be determined by
interference by one or more of the following measures.
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected
-Consult the dealer or an experienced radio/TV technician for help
Changes or modifications not expressly approved by the party responsible
for compliance could void the user's authority to operate the equipment.
This device complies with Part 15 of the FCC Rules.Operation is subject
to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including
interference that may cause undesired operation.