GSM MOBILE PHONE User Manual BRAND NAME:MC-MOBILE MODEL NAME:2222 FCC ID:2AACK2222 1
1 2 3 4 5 6 7 8 9 10 11 12 13 14 Contents For your safety ................................................................................... 3 Start to use ......................................................................................... 4 Operation manual .............................................................................. 6 Phonebook ......................................................................................... 7 Message ......................................................
1 For your safety Notice: To use your handset safely and efficiently, please read the following instruction carefully before using and abide by it. Be careful when you are driving. Please abide by the relative local laws and regulations. Use both of your hands to drive! Put the handset in its seat to avoid falling down. The ballonet will charge quickly when it is in danger, please don’t put anything in its security scope, including fixed phone and handset equipment.
Accessory and battery Only the appointed accessory and battery can be used. It is suggested that you return the used battery to the factory or put it in the appointed recycle zone. Do not put it together with other rubbish or discard it. Reasonable use Please use the handset in reasonable way. It is prohibited to put your handset in high temperature (over 60°C), such as beside the window where there is sunshine. Please use wet or antistatic cloth to clean the handset.
The battery indication on LCD will bicker. If the handset is powered off when charging, LCD will display “charging interface”. If you overuse the handset when it is out of battery, LCD will display “charging” a while after you begin to charge it. When the battery indication is full and stops bickering, it means the handset has been completely charged. If the handset is charged when power off, the indication will also be displayed on LCD.
Insert and take out the SIM card Normally, SIM is put in a card ; please take it out carefully before installing. Power off the handset, discharge the battery or other power supply. Insert the card, the metal face being downward. When you need to take out the card, please turn off the handset and discharge the battery first. Warning: forbid to take out the SIM card when the handset is powered on.
4 . Phonebook You can choose the following functions in the phonebook: z Quick searh:You can enter the phonebook list interface, and use left softkey to the call to determine and send information, edit, delete, copy and so on z Search contact: search contact information though the name z Add number: you can add new entry to the SIM1、SIM2 or the phone. There is a little difference on the saving format. z Copy all: copy all the linkmen from SIM to handset or from handset to SIM.
handset/SIM, move to handset/SIM, delete all, copy all, move all, use the number, use the connection, and so on. 5.4 SMS setting You have to make some basic settings before using the message function. There are the following options: z Profile setting: set a suitable format for messages. After entering a single format, you can set the file name; SMS center number, validity period and sending format. 6 Call history In main menu, click call history icon to go to call register interface. 6.
z card. Power on\off display:select system default image or user defined for power on\off display Show date and time:Turn on or off the time display in the standby interface 7.1.6 Greeting text:Display the greeting text when you power on handset. 7.1.7 Speed dial: Long press the corresponding number key you set to make a call. 7.2 Dual SIM setting:you can open SIM1 or SIM2 for you handset. 7.3 Network setting 7.3.1 SIM1 network setting: z z z Netword selection:select netword by manual or autornatic.
Change the password including PIN, PIN2 code and the password of the phone lock. Note: some functions need the support of the operator. 7.5 Call settings z SIM1 call settings Call waiting: open or close this function Call divert:when customers can not anwer the phone,transfer calls to the pre-set number of customers. Call barring:forbid all outging calls and incoming calls Line switching:Defual mode is line1. z SIM2 call settings The details is referred to SIM1 call settings.
Ring type: single, repeat and ascending 8.1.2 Meeting mode The same to the general mode 8.1.3 Outdoor mode The same to the general mode 8.1.4 indoor mode The same to the general mode 8.1.5 Headset mode The same to the general mode 8.1.6 Bluetooth mode The same to the general mode 8 Audio player After choosing music, there are the following operations: z Pre.playlist: choose the music in handset or memory card. z List auto gen.: you can choose to on or off this function. z Repeat: you can repeat playing.
Note : you will lose all the information after formatting. Pressing the folder, there are following operations: Open: open the folder New folder: add a new folder Rename: rename the folder Delete: delete the folder Sort by: taxis the folds, according to name, type, time or size. Note: Some folders are hidden. To show them, you’ll have to save it to root directory of the handset with a right format, and move them to a corresponding folder. 10.
Store:Choose to preview the pictures stored on the phone or memory card. Restore default Return all setting to factory default. Warning: please adjust the volume suitably, to avoid hurting the listening. 10.4 image viewer:Refer to the above photo set. 10.5 Video player After entering the film list, you can: z Select the file by up/down key, then you press options to go to the interface: play, send, rename, delete, delete all files, sort by or storage. z Click the film file to go to the option interface.
z z z z z z Inquiry audio device: My device:The name of handset device will be displayed after matching and connecting successfully. Active device: activate Bluetooth and the headset before entering this menu, and then begin to search the handset device. You will be asked to input the password of Bluetooth headset. And then you can use Bluetooth for talking or play MP3 after matching. Setting Visbility:on/off Change device name:you can change the Bluetooth name. Audio path:choose storage path.
¾ Clear: press right functional key. The content cleared is decided by the inputting status. If the result is already there, then 0 is displayed on LCD, ¾ If you are inputting number or symbols, only the current number or symbol is cleared. ¾ Exit: Press back key to exit. If there is no soft back key on LCD, then you have to press clear key to exit one by one. 11.5 Tasks:Input the subject and turn on alarm,it will remind you tasks on you setting time 11.
z The battery can be charged for hundreds times, but it will become invalid at last. Please buy a new one when the idle time and talk time are apparently shortened. z Please disconnect the charger with power supply when you do not use the charger. Do not connect the battery to the charger for more than a week, overcharge will shorten the battery life. z Please do not put the battery together with metal. z Please do not bend or open the battery. z Please do not put the battery in water or fire.
circuit. 14.3 Basic trouble solutions If you feel something wrong when using the handset, please refer to the following solutions. If you still can not solve it, please contact with the operator.
The voltage unsuitable Can not charge is Use the appointed standard voltage Non-standard charger Use the charger appointed not contact well Check whether the plugs are well connected.
Your wireless handheld portable telephone is a low power radio transmitter and receiver. When it is ON, it receives and also sends out radio frequency (RF) signals. In August, 1996, the Federal Communications Commissions (FCC) adopted RF exposure guidelines with safety levels for hand-held wireless phones. Those guidelines are consistent with the safety standards previously set by both U.S. and international standards bodies:
with any other antenna or transmitter. This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment.