Operation and Installation Manual CD/DVD PLAYER COMMANDER SIRIUS USB WM1-BB Central Unit Processing Center
Introduction Please carefully read all of the information in this manual. Familiarity with operation and installation procedures will help you obtain the best possible performance from your new Central Unit Processing Center. Safety Information DO NOT OPEN COVERS AND DO NOT REPAIR YOURSELF. PLEASE REFER SERVICING TO A QUALIFIED TECHNICIAN. CHANGES OR MODIFICATIONS TO THIS PRODUCT NOT APPROVED BY THE MANUFACTURER WILL VOID THE WARRANTY AND WILL VIOLATE FCC APPROVAL. Index Button Locations and Functions .
Button Locations and Functions 1 2 3 VOL MUTE 5 4 6 7 EQ DIM ST DISP ENT BND S-MOD DVD SETUP iPOD MENU DIR/CAT RPT SHF SCN 3 4 5 6 13 12 11 10 VOL MODE MENU 18 16 ASM LOUD 2 17 16 1 2 15 14 SETUP 9 8 WR1-P Commander (Sold Separately) 1. Power On/Off and Display Dimmer: Press to turn the unit on or off. Press and hold to dim the display. Press and hold again to restore display’s illumination. 2.
Button Locations and Functions (Continued) 13. Multi-Function Button #3: Radio Mode: Press and hold until a beep is heard to store a radio station into memory #3 (CH3). Press and release when recalling preset radio station #3. CD Mode: See “Preview CD Tracks” for more information (page 12). CD Changer Mode: Press to repeat a CD track. Press and hold to repeat the entire disc. Press again to cancel. 14.
Remote Control Button Locations and Functions (Option) (Continued) 14. Multi-Function Button #4: Radio Mode: Press and hold until a beep is heard to memorize a radio station. Press and release when recalling preset radio station #4. CD Mode: See “Random CD Track Play Order” for more information (page 12 or page14). CD Changer Mode: Press to play all the tracks on the CD in random order. Press and hold to play every loaded CD in random order. Press again to cancel. 15.
General Operations Power On/Off: Press the EQ button to turn the unit on and off.
AM/FM Radio Operation (Continued) Manually Tuning in a Radio Station: Press and hold either the or button until “MANUAL” appears in the display then release. Then press the or until the desired radio station appears in the display. Note: The unit will automatically switch from FM Mono to FM Stereo when the signal strength increases to a stereo level. If the stereo signal should become weak, the unit will switch back to Mono. FM Stereo reception is indicated when the “ST” appears in the display.
AM/FM Radio Operation (Continued) Scanning Stored Radio Stations: 1. Press the ENT BND button to select either the FM1, FM2, FM3, AM1 or AM2 radio band. 2. Press the ASM button and the tuner scans for preset stations stored in the current band and pauses for 5 seconds at each station. When a desired station is reached, press the ASM button again to stop scanning.
Sound Controls (Continued) Treble: 1. Select the Treble mode (TRB) by pressing the SETUP button. 2. Increase the Treble by pressing the VOL button. Decrease the Treble by pressing the VOL button. 3. Control reverts back to volume control after 5 seconds. VOL Increase MUTE DIM ENT BND S-MOD DVD SETUP iPOD MENU Decrease LOUD DIR/CAT RPT SHF SCN 3 4 5 VOL MENU MODE 2 1 6 Balance: 1. Select the Balance mode (BAL) by pressing the SETUP button. 2.
Sound Controls (Continued) Subwoofer Cutoff Frequency (SWF): 1. Select the Subwoofer Cutoff Frequency mode (SWF) by pressing the SETUP button. 2. To adjust the subwoofer cutoff frequency press the VOL or VOL button. SWF 160 = Low Pass 160Hz SWF 120 = Low Pass 120Hz SWF 80 = Low Pass 80Hz 3. After 5 seconds control reverts back to volume control. Note: If subwoofer output is turned Off, Subwoofer Cutoff Frequency mode is not accessible. See Subwoofer Output (page 10) for more information.
Disc Warnings Disc Formats Supported by this Player: DVD 12cm disc (Single-sided disc only) Label side up CD 12cm disc Do not touch the underside of the disc MP3 12cm disc Do not bend Handling: • Dirt, dust, scratches and warping disc will cause non operation. • Do not place stickers on disc or scratch disc. • Do not place discs in the following places: Direct sunlight, Dirty, dusty and damp areas, Near car heaters, Car seats or dashboard.
Model: MBB-CD CD Operation (Option) (Continued) Ejecting a CD: Press the button to eject a disc. Pausing a CD: Press the button to pause the disc, press it again to resume play. EQ VOL MUTE DIM DISP ENT BND ASM LOUD S-MOD DVD SETUP iPOD MENU DIR/CAT RPT SHF SCN 3 4 5 VOL MENU MODE 2 1 SETUP 6 Repeating a CD Track: The WBB-CD’s default setting is to play the entire disc and then continually repeat the disc. To repeat a CD track press the RPT button and “RPT” appear in the display.
Model: MBB-CD USB Operation (Option) General Operations: 1. Press the button to turn the unit On. 2. Open the door on the MBB-CD and insert the USB connector into the slot. 3. The unit will automatically switch to the USB2 mode and start playing. Note: The controls on the MP3 player will become inoperable, and the WM1-BB will now control the MP3 player. Track Selection: Press the button to select a lower track. Press the button to select a higher track. The track number will appear in the display.
CD Operation (Option) Model: MBB-DVD General Operations: 1. Press the button to turn the unit On. 2. Gently insert the disc into the slot with the label side up. The unit will automatically load the disc. Note: If a CD does not auto-load, DO NOT FORCE it into the slot, as you may already have a CD loaded as indicated by the inserted disc icon.
Model: MBB-DVD MP3 Disc Operation (Option) Random CD Track Play Order: Press and hold the SHF button until “SHF” appears in the display. The tracks on the disc will play in a random order. To cancel this feature press and hold the SHF button again. EQ VOL MUTE DIM DISP ENT BND ASM LOUD S-MOD DVD SETUP iPOD MENU DIR/CAT RPT SHF SCN 3 4 5 VOL MENU MODE 2 1 SETUP 6 Hold Disc Track Selection: EQ Press the button to select a lower track. Press the button to select a higher track.
USB Operation (Option) (Continued) Model: MBB-DVD Pausing a Track: Press the button to pause the track, press it again to resume play. EQ VOL MUTE DIM DISP ENT BND Repeating a Track and Random Track Play Order: S-MOD DVD SETUP iPOD MENU ASM LOUD DIR/CAT RPT SHF SCN 3 4 5 VOL MENU MODE 2 1 SETUP 6 (See CD Operation for details) Auxiliary Audio/Video Input Operation (Option) Model: MBB-DVD General Operations: 1. Press the button to turn the unit On. 2.
Model: MBB-DVD DVD Operation (Option) (Continued) Stopping a DVD: Press the button to stop the disc. To resume play, press the button. Pressing the button 2 times. Then pressing the button and the disc will start playing from the beginning. EQ VOL MUTE DIM DISP ENT BND ASM LOUD S-MOD DVD SETUP iPOD MENU DIR/CAT RPT SHF SCN 3 4 5 VOL MENU MODE 2 1 SETUP 6 Ejecting a DVD: Press the button to eject a disc. DVD Chapter Selection: Press the button to select a lower chapter.
Model: MBB-DVD DVD Operation (Option) (Continued) Subtitle Language Menu: TITLE Press the SUB-T button during playback. Each time the button is pressed, the subtitle language changes in sequential order. • Some discs may only contain one subtitle language. • Depending on the disc, the number of subtitle languages may be different.
CD Changer Operation (Option) Load CDs into Changer: Insert the CD magazine into the external CD changer. Power On/Off: Press the EQ button to turn the unit On. Selecting the Play Source: Press the MODE button until “CD-CH” appears in the display. VOL MUTE DIM DISP ENT BND S-MOD DVD SETUP iPOD MENU ASM LOUD DIR/CAT RPT SHF SCN 3 4 5 VOL MENU MODE 2 1 6 SETUP CD Track Selection: Press the button to select a lower track. Press the button to select a higher track.
CD Changer Operation (Option) (Continued) Random CD Track or Disc Play Order: Press the SHF button and “SHF” will appear in the display. The tracks on this disc will play in random order. Press and hold the SHF button and “DSHF” will appear in the display. The tracks on all the discs will play in random order. To cancel either function, press the SHF button again.
Sirius Satellite Radio Operation (Option) Please note that satellite radio signal may be blocked by trees, buildings or other obstacles. Information display during reception: ANTENNA ERROR: When an antenna issue exists. ACQUIRING SIGNAL: When a channel is being tuned-in (no signal is yet received). INVALID CHANNEL: A channel without a broadcast has been selected, or the receiver may not be activated.
Sirius Satellite Radio Setup (Option) (Continued) Category Tuning: 1. Press the MENU button until “Category” appears in the display. EQ VOL MUTE DIM DISP ENT BND SAT S-MOD DVD SETUP iPOD MENU LOUD 2. Press the 1 or 2 button to select the desired category. DIR/CAT RPT SHF SCN 3 4 5 ASM VOL MENU MODE 2 1 6 SETUP EQ VOL MUTE DIM DISP ENT BND SAT S-MOD DVD SETUP iPOD MENU LOUD MENU 3. Press the or button to select the desired channel inside the category.
Sirius Satellite Radio Setup (Option) (Continued) Recalling Memorized Sirius Channel: EQ 1. Press the ENT BND button to select either the SIRIUS 1, SIRIUS 2 or SIRIUS 3 band. 2. Press and release the Sirius channel recall button 1, 2, 3, 4, 5, or 6 to select the memorized channel. VOL MUTE DIM DISP ENT BND SAT LOUD S-MOD DVD SETUP iPOD MENU DIR/CAT RPT SHF SCN 3 4 5 ASM VOL MENU MODE 2 1 SETUP 6 IPOD Operation (Option) General Operations: 1.
IPOD Operation (Option) (Continued) 3. Press the ENT BND button to select the “Songs” menu. EQ VOL MUTE DIM DISP ENT BND S-MOD DVD SETUP iPOD MENU 4. Press the button to select the desired song from the menu. Once the button has been used to scrolled into the song list the button can be used to scroll backwards. ASM LOUD DIR/CAT RPT SHF SCN 3 4 5 VOL MENU MODE 2 1 6 SETUP EQ VOL MUTE DIM DISP ENT BND S-MOD DVD SETUP iPOD MENU MENU 5.
IPOD Operation (Option) (Continued) Display Selection: Press the DISP button to display the following track information: Elapse Time, Title, Artist, Album and Track. EQ VOL MUTE DIM DISP ENT BND ASM LOUD S-MOD DVD SETUP iPOD MENU DIR/CAT RPT SHF SCN 3 4 5 VOL MENU MODE 2 1 SETUP 6 Display Modes USB Operation (Option) General Operations: 1. Press the button to turn the unit On. 2. Insert the USB connector into the USB slot on the WM1-BB chassis. CD/DVD PLAYER COMMANDER SIRIUS USB 3.
Auxiliary Audio Input Operation Selecting an Auxiliary Audio Play Source: 1. Connect an auxilliary Audio Play Source to the RCA jacks on the WM1-BB chassis. 2. Press the MODE button until “AUX IN or AUX1 IN” appears in the display. AUX IN 3. Refer to the audio device’s owner’s manual for proper operation. Note: The WM1-BB/WRC-P1 will not control the auxiliary source but the sound controls can be adjusted. 26 SUB.
Setup Features Button Beep On and Off Confirmation: Follow the instructions below to turn On or Off the button when pressed beep confirmation. 1. Press and hold the SETUP button approximately 10 seconds until “BEEP ON” appears in the display. EQ VOL MUTE DIM DISP ENT BND S-MOD DVD SETUP iPOD MENU SW ASM LOUD DIR/CAT RPT SHF SCN 3 4 5 VOL MENU MODE 2 1 6 SETUP VOL 2. Press the button for beep confirmation Off, and press the VOL button for beep confirmation On. 3.
WM1-BB Installation Note: WM1-BB housing is not waterproof and must be mounted in a dry location.
WBB-CD and WBB-DVD Installation (Option) Notes: • WBB-CD and WBB-DVD housings are not waterproof and must be mounted in a dry location. • Do not mount the WBB-CD and WBB-DVD at an angle more than 15 degrees.
Radio Commander Installation 20mm 4.5mm 4.
Speaker Connections Left Front Speaker Right Front Speaker _ White/Black Wire Gray/Black Wire _ + White Wire Gray Wire + AUX IN SUB.
Auxiliary Connections This unit for use only with a 12 Volt DC power source with a negative ground. AUX IN SUB.
Input Connections External Automotive Type Antenna (Optional) AUX IN SUB.
Input Connections (Continued) CD/DVD PLAYER COMMANDER SIRIUS USB MP3 Player (Optional) MP3 Cable (Optional) Sirius Antenna (Optional) Wired Remote Controller (Optional Model: WRC-P1) Wired Remote Controller (Optional Model: WRC-S1 or WRC-S2, Not Shown) 34 Sirius Receiver (Optional)
Input Connections (Continued) CD/DVD PLAYER COMMANDER SIRIUS USB Slave CD Player (Optional Model: WBB-CD) Slave DVD Player (Optional Model: WBB-DVD) Cables Supplied with CD/DVD Players Video Output (1) (Model: WBB-DVD Only) Video Output (2) (Model: WBB-DVD Only) Replaceable Fuse If the fuse should blow, check that the wiring is correct. If the wiring is correct, replace the fuse with the same amperage rating as the original (15 amp). AUX IN SUB.
Warranty LIMITED WARRANTY This warranty will be honored only in U.S.A. MB Quart offers to the original purchaser a one (1) year warranty period from date of purchase. Except as specified below, this warranty covers all defects in material and workmanship in this component. The following are not covered by the warranty: 1. Any product which is not distributed in the U.S.A. by TriStar Distributing or which is not purchased in the U.S.A. from an authorized TriStar Distributing dealer. 2.