5. Specification Radio Frequency Type ISM2407MHz~2476MHz Type Wireless Microphone/Receiver Unit Radio Interface ISM 2.4GHz: FSK Modulation with Frequency Hopping Voice Codec 16bit/16KHz Tx Max Output Power 10mW Rx Sensitivity -95dBm Voice Latency <35ms Num. of Frequency Channel 139ch Hopping Channel 16ch Channel Spacing 500KHz Data Rate 2Mbps Freq, Bandwidth 500KHz Battery Li-ion Battery @ 3.7V/TBD 1100mA Antenna Internal Helical Antenna Talk Time 10hr Typ. Power Consumption Avg.
FCC Information to User This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this equipment near water. 6) Do not using near any heat sources such as radiators, heat resisters, stove, or other equipment that produce heat. European CE notice to users and product statements This product is CE marked according to the provisions of the R&TTE Directive(1999/5/EC). Hereby, Maytel Co.
CONTACT INFORMATION Manufacturer Address #417 Doosan Venture Digm 126-1, Pyeongchon-dong, Dongan-gu, Anyang-si, Gyeonggi-do, Republic of Korea To locate in-country MAYTEL CO., LTD., distributors of the Multicom 2.4G (SWATCOM Multicom) please refer to the MAYTEL CO., LTD. Website http:// www.maytel.com These distributor(s) represent local contacts for this product. CORPORATE HEADQUARTERS: MAYTEL CO., LTD.
EUROPEAN UNION “DECLARATION OF CONFORMITY” DECLARATION OF CONFORMITY MAYTEL CO., LTD. #417 Doosan Venture Digm 126-1, Pyeongchon-dong, Dongan-gu, Anyang-si, Gyeonggi-do, Republic of Korea declare under our sole responsibility that the product(s) Multicom 2.4G (SWATCOM Multicom) – MC-11 2.4G to which this declaration relate(s) is in conformance with the following standards: EN 301 489-1 V1.9.2:2011 EN 301 489-17 V2.2.1:2012 EN 60950-1:2006/A2:2013 EN 300 328 V1.9.