User Manual

BETTER FOR YOUR BUSINESS

When ordering components, specific color and/or size information may be required.

Contact a Mayline Customer Service Representative. 1-800-822-8037

NOTE: Please count and inspect all pieces before disposing of any carton or packing materials.

COMPONENTS:

Item # QTY. DESCRIPTION PART #

1 1 LEG, ADDER A8132**

2 2 MODESTY PANEL B8416**

3 1 WORKSURFACE L7219**

4 2 PANEL, CONF. LEG B8411**

HARDWARE BAG (PART No. A8128)

* for individual item, order that part number

Item # QTY DESCRIPTION PART #

E1 2 TUBE INSERT, 5/16-18 T139*

E2 2 GLIDE Q608*

E3 8 SCREWS #10-32 x 1/2" X204*

E4 28 SCREW #10 x 3/4 X11*

E5 2 SLAM LATCH Q643*

ASSEMBLY INSTRUCTIONS

TRANSACTION

BASIC 6' ADDER TABLE

** Denotes Color Code

(1)

PAGE 1
ASSEMBLY INSTRUCTIONS TRANSACTION BASIC 6' ADDER TABLE NOTE: Please count and inspect all pieces before disposing of any carton or packing materials. COMPONENTS: Item # 1 2 3 4 QTY. 1 2 1 2 When ordering components, specific color and/or size information may be required. Contact a Mayline Customer Service Representative. 1-800-822-8037 DESCRIPTION PART # LEG, ADDER MODESTY PANEL WORKSURFACE PANEL, CONF. LEG A8132** B8416** L7219** B8411** ** Denotes Color Code HARDWARE BAG (PART No.
PAGE 2
1. Install threaded inserts (E1) into Adder Leg (1). 2. Thread Glides (E2) into threaded inserts installed in Step 1. 3. Partially install Screws (E3) into the second holes from the top and the bottom holes on both sides of the Adder Leg so that the screw heads are approximately 1/8" from the leg. 4. Using the key hole slots in the ends of the Modesty Panels (2), attach the Panels to Adder Leg. TIGHTEN FOUR SCREWS holding panels at this time.
PAGE 3
5. Starter Base Assemble Starter Base per instructions included with that product. 6. Move assembled Adder Base into position. Using the key hole slots in the ends of the Modesty Panels (2), attach the Panels to the assembled Starter Base. TIGHTEN FOUR SCREWS holding panels at this time. 7. Continue the Conference Table assembly by joining another Adder Base or complete the Conference Table by joining the final section. 8.