Installation and User Instructions Mayku Multiplier MMUA22100AA, MMUA22123UK, MMUA22123EU, MMUA22123AU, MMUA22112US These are the original English instructions If incorrectly used this machine may cause severe injury - please read this manual carefully before operating your machine and keep for future reference. May 2022 Version 1.00 Mayku Limited The Biscuit Factory, Unit J410, Jam Studios, 100 Drummond Road, London, United Kingdom, SE16 4DG.
Table of Contents Table of Contents 1 1 PREFACE 1.1 Description of the user 5 5 1.2 Conventions used in this manual 5 1.3 Explanation of safety warnings 6 1.4 Retaining instructions 6 1.5 Obtaining documentation and information 7 2 DESCRIPTION OF THE MAYKU MULTIPLIER 2.1 Intended use and reasonably foreseeable misuse 8 8 2.2 System overview 8 2.3 Technical data 9 2.4 Product Elements 11 2.5 Understanding the user interface 13 2.
5 OPERATION/USE 5.1 How to use the Mayku Multiplier 28 28 5.1.1 Power on 28 5.1.2 Turn on 28 5.1.3 Follow on-screen instructions 29 5.1.4 Connecting to WiFi 29 5.1.5 Machine Registration 30 5.1.6 Starting/Stopping the product’s operation 30 5.1.7 Checks before using the machine 31 Ensure the machine is on a level and even surface 31 Ensure both safety release valves have clearance and are not obstructed. 31 5.2 What to Do in emergency and exceptional Situations 6 MAINTENANCE 6.
1 PREFACE 1.1 Description of the user These instructions are intended for the end-user of the Multiplier. The end-user can be described as each person who interacts directly with the machinery. The end-user typically includes, but is not limited to the: - Operator Installer Maintenance personnel or technicians Any maintenance required outside of this user manual shall be carried out by an authorised, qualified and skilled maintenance personnel. 1.
1.3 Explanation of safety warnings DANGER indicates a hazard with a high level of risk which, if not avoided, will result in death or serious injury WARNING indicates a hazard with a medium level of risk which, if not avoided, could result in death or serious injury. CAUTION indicates a hazard with a low level of risk which, if not avoided, could result in minor or moderate injury. NOTICE Indicates information considered important, but not hazard-related. 1.
1.5 Obtaining documentation and information The latest version of the documentation is available at the following address: mayku.me/manuals For other questions, information, technical assistance or ordering user instructions, please contact the manufacturer: Mayku Ltd The Biscuit Factory Unit J410 Jam Studios 100 Drummond Road London United Kingdom SE16 4DG Website: https://www.mayku.me/ Contact: support@mayku.
2 DESCRIPTION OF THE MAYKU MULTIPLIER 2.1 Intended use and reasonably foreseeable misuse The Multiplier is intended to be used as a desktop pressure forming machine, for making high detail molds from suitable templates for a range of applications. The Multiplier is intended for indoor use in a well ventilated area only. Unintended uses: ● ● ● ● The machinery shall only be used for applications as described by the manufacturer. All other applications are unprofessional and considered dangerous.
2.3 Technical data Parameter Unit Device name Mayku Multiplier Designation Pressure Former Type Thermoforming Machine Technical life span 10 Years Input 110-240V, 12A/6A (Single Phase) Maximum Pressure 4.1 bar/60 psi (Dome), 12 Bar/175 psi (Tank) Max Power 1500W Weight Unboxed: 57kg (125lbs) | Boxed: 67.5kg (149lbs) Frequency band 2.4GHz Maximum radio-frequency power transmitted in the frequency band(s) in which the radio equipment operates 20.
Operation and storage temperature range +5 to +40°C Relative humidity 0 to 85% FCC ID 2A6JZMMUA221 Software version 1.
2.
Internal: Base:
2.5 Understanding the user interface Control Panel: 2.6 Explanation of auditory and visual signals The Multiplier uses on-screen commands and auditory beeps to convey instructions. The Mayku logo lights up when the machine is turned on.
3 SAFETY INSTRUCTIONS Read this important information carefully before you use the Mayku Multiplier, and keep it for future reference. Failure to follow all the instructions listed may result in electric shock, fire or serious personal injury. Mayku accepts no responsibility for injury to yourself or others, or damage to property or the Multiplier, nor will the warranty apply should the Mayku Multiplier and related materials be used inappropriately or if the instructions are not followed correctly.
● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● Always place the Multiplier on a stable, flat, heat-resistant surface. Also ensure that the surface can take the weight of the Multiplier during use. Do not use the Multiplier if the plug, the mains cord or the machine itself shows physical damage, or if the machine functions abnormally in any way, or if the machine has been dropped or has been exposed to water or other liquid.
● ● ● ● ● ● ● ● ● ● ● ● ● Objects placed on the Multiplier bed may get hot. Regularly check the Multiplier power cord carefully for damage. Fully unwind the Multiplier mains cord before you plug it in the wall socket. Do not allow the Multiplier power cord to hang over sharp table edges or come into contact with hot surfaces. Make sure that the Multiplier is switched off and remove the plug from the mains electrical supply when it is not in use, before it is cleaned and while it is being repaired.
3.1 Graphical symbols 3.1.1 Explanation of safety information on the product and packaging. Symbol Meaning CE Marking UKCA Marking FCC Marking RCM Marking Warning, risk of crushing fingers.
3.2 Potential health consequences The Multiplier should be operated indoors only. The area shall be well ventilated, as some plastics used may off-gas during the heating process, and a build-up of these fumes may be harmful. 3.3 Personal protective equipment Always use appropriate personal protective equipment when working with the Multiplier: ● ● 3.
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ● ● ● ● ● Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.
4 4.1 PREPARATION How to transport and store the Mayku Multiplier Ensure that the Multiplier is on a stable surface before use. Moving the Multiplier during use is dangerous and may result in injury or death. 4.1.1 Dimensions and mass Unboxed Dimensions: 585mm (L) x 515mm (W) x 420mm (H). Weight: 57kg (125lbs) Boxed Dimensions: 700mm (L) x 700mm (W) x 640mm (H). Weight: 67.
4.1.2 Lifting, handling and transporting the product To lift and handle the product safely: 1. Make sure that your path is clear from obstacles. Make sure that surfaces are not wet or slick. 2. Wear proper protective shoes and gloves 3. Make sure that the machine is closed and both locks are set to the “locked” position. 4. Use the top handle or hold the base to lift the machine. WARNING! Always carry out lifting with more than one person. 5. Put the machine in the correct location.
4.1.3 Storing the product / Storing during intervals in normal use To store the product safely: 1. The machine shall be used and stored on a strong and stable surface. 2. Ensure the machine is stored in the closed position at all times. 4.2 How to install the Mayku Multiplier The Multiplier is a heavy machine, and requires a minimum of (2) people to lift. Do not attempt to lift the machine by yourself. 4.2.
4.2.2 Unpacking the product Once the cardboard lid and shipping box have been removed follow these steps: 1. 2. 3. 4. 5. Remove the quick start guide, user manual and tool kit from the foam lid. Lift off the foam lid Remove the four foam side panels Remove the angled foam blocks Follow the lifting instructions in 4.1.2 The machine shall be positioned on a strong and stable surface. Packaging materials should be kept for future transportation purposes.
4.2.3 Packaging contents Your delivery will contain the following items: A. B. C. D. E. Multiplier machine (One) Mains cable (One) Quick start guide Instruction manual Set of maintenance tools a. Allen keys (Two) b.
4.2.4 Minimum space required The machine dimensions are: 585mm (H) x 515mm (W) x 420mm (H) A minimum of 150mm is required behind the machine to allow for cables and other accessories.
4.2.5 Installation of the Mayku Multiplier Ensure that both safety release valves (located on the bottom of the machine) are not blocked during positioning. No tools are required for installation To install the Mayku Multiplier: 1. Once the machine is in its final position check to ensure there is 150mm of space behind the machine, and the safety release valves on the base are not blocked. 2.
4.3 How to commission the Multiplier 4.3.1 Training of operators It is the responsibility of the individual / company to ensure all operators of the Multiplier have read and agree to all sections of this user manual. 4.3.2 Commissioning the machinery Regular maintenance should be carried out to ensure smooth and safe operation of the Multiplier. Maintenance can be found by going to Menu > Maintenance on the machine.
5 OPERATION/USE 5.1 How to use the Mayku Multiplier 5.1.1 Power on Make sure that the mains cable is connected to the machine, and turn the power switch to the ON position. 5.1.2 Turn on Push the on/off button to the ON position to power up the machine.
5.1.3 Follow on-screen instructions For further guidance on using the Multiplier, please visit: platform.mayku.me 5.1.4 Connecting to WiFi The Multiplier can be updated wirelessly over WiFi. This means we can add new material profiles, new functions and new accessories to your machine over time. For more information on connectivity, please visit: mayku.
5.1.5 Machine Registration Scan the QR code on the front of your quick start guide to register and activate your machine, and gain access to the Multiplier Academy — your community hub of resources, projects and personalised help to get the most out of your Multiplier. You can also register any time by visiting: platform.mayku.me 5.1.
5.1.7 1. 2. 3. 4. 5. 6. 7. Checks before using the machine Ensure the machine is on a level and even surface Ensure both safety release valves have clearance and are not obstructed. Ensure the machine is clean and clear of debris Ensure the heaters are not cracked or broken Ensure the reflector is free from dust or debris Ensure that no objects or debris are obstructing the temperature sensor Ensure that the seal is clean and even, with minimal warping and distortion. See section 6.
6 MAINTENANCE Opening or modifying the machine will void your warranty and could cause serious injury or death. 6.1 How to maintain the machine Product maintenance by non-skilled persons 6.1.1 Cleaning and lubrication Cleaning the seal: 1. Use a damp microfiber cloth and clean the seal in a circular motion, making sure the seal is seated properly into the dome. Cleaning the mesh: 1. Locate screws 2. Unscrew 3. Clean with damp cloth Cleaning the heat sensor: 1.
6.1.2 Draining the tanks Draining the tanks creates a loud noise, and can spray water out the bottom of the machine. Make sure a thin towel is placed under the machine, without obstructing the release valve. Make sure to wear hearing protection when doing tank draining/venting. Only use tools as described in 6.1. Tank draining process: 1. Follow on Screen instructions (Menu > Maintenance) - more information at platform.mayku.me 6.2 6.2.
6.2.2 Monthly Inspection tasks Task Action Drain the tanks Follow the on-screen maintenance instructions in the settings menu. Check the heat temperature sensor Clean gently with a damp cloth or cotton swab. Check the heat reflector Wipe down the heat reflector. Check the rail lubrication Apply recommended lubricant if dry. 7 TROUBLESHOOTING AND REPAIR 7.
elements for thermoforming. the properties of thermoforming. Plastic does not form around molds properly. Machine was left closed too long before locking and forming, allowing the sheet to cool. Close and lock the machine faster to maintain plastic temperature. Error code on display. Internal electronics failure. Report to Mayku at support@mayku.me. 7.2 Frequently Asked Questions Question Answer Where can I purchase sheets for my machine? You can purchase sheets on our website, at mayku.me.
8 DISPOSAL 8.1 Disposal of electronic components The symbol on the product, the accessories or packaging indicates that this device shall not be treated as unsorted municipal waste, but shall be collected separately! Dispose of the device via a collection point for the recycling of waste electrical and electronic equipment if you live within the EU and in other European countries that operate separate collection systems for waste electrical and electronic equipment.
set forth below. To be eligible for this Exclusive Limited Warranty the Hardware products shall be purchased through Mayku or through a Mayku Authorised Reseller with a valid Proof of Purchase. Mayku warrants Mayku-branded Hardware Products against defects in materials and workmanship under normal use for a period of two years from the date of purchase by the original end-user purchaser (“Warranty Period”).
occurred due to a defect in materials or workmanship; or f) to cosmetic damage, including but not limited to scratches, dents. This warranty gives you specific legal rights, and you may also have others rights which vary from state to state or country to country. Mayku responsibility for hardware defects is limited to repair or replacement service as determined by Mayku in its sole discretion. 9.
10 TERMS All information in the quick start guide, instruction manual and packaging materials is subject to change at any time without notice and is provided for convenience purposes only. Mayku reserves the right to modify or revise the quick start guide, instruction manual and packaging materials in its sole discretion and at any time. You agree to be bound by any modifications and/or revisions. Please contact Mayku Support for up-to-date information.
10.