User's Manual

Controller Compatibility
Quick Sta Guide
Modify the Vibration Intensity
System Compatibility
MAGIC-NS Lite
lncludes
Connect your Bluetooth controllers to your Switch, PC Windows, macOS, PS3,
NEOGEO mini, NEOGEO Arcade Stick Pro, SEGA MEGA DRIVE mini, SEGA Genesis
Mini, SEGA Astro City Mini, Raspber Pi enteainment system.
If you nd any issues or have any diculty operating the device,please reach out
to us at info@mayash.com and we will be more than happy to help you out.
Update to the latest rmware at www.mayash.com
Connect the adapter to your game console.
* LED Indicator blinks slowly: The Bluetooth is not connected yet.
* LED Indicator blinks quickly: The Bluetooth is Pairing.
* LED Indicator becomes solid: The connection is successful.
* Switch Pro mode (LED is purple): Go to System
Setting > Controller and Sensors > Turn on Pro
Controller Wired Communication.
* Bluetooth headset only works for Switch mode
(LED is red).
MAGIC-NS Lite
Manual
Bluetooth Controllers
USB A-Male
01
LED Indicators
02
Bluetooth Controllers Set Up
04
Button on the top of the adapter
03
LED Indicator
USB A-Male
Switch Button
Press the button sholy to pair the
controllers and the adapter. The
indicator blinks quickly.
To switch the modes, press and
hold the button on the top of the
adapter for 3-5 seconds.
Switch PS3 PC
Connect the adapter into any spare USB
po on your game console.
To switch the modes, press and hold the
button on the top of the adapter for 3-5
seconds. The LED indicator blinks slowly.
Turn on the Bluetooth controller, press the
Button on the top of the adapter, and then
press the pair button on your Bluetooth
controller. The LED indicator blinks quickly.
Press and hold the Button R1/RB and R3 for 3-5 seconds until the controller
keeps rumbling.
(Please keep holding these two buttons until you nish the below whole
process).
To modify the vibration intensity, press the D-Pad “Up” or “Down”.
Note:
*
If you are having the issues connecting a Xbox Series S/X or Xbox Elite 2 controller to
the MAGIC-NS Lite, this is what we recommend:
1. Disable or turn o any Bluetooth device (like your Sma TV or Set Top Box etc.) within
range of the controller.
2. Turn o your Xbox Series S/X controller and turn it on again.
3. Pair your Xbox Series S/X controller with MAGIC-NS Lite again by pressing the button on
the adapter and pair button on your controller (LED indicator blinks quickly). The pairing
process may take a few seconds. Please be patient! The connection may be disconnected
sholy and then connected again during the pairing process. Please wait patiently until the
LEDs stop blinking.
4. The LED indicator becomes solid when connection is successful.
DualSense, DualShock 4, Xbox Series X/S, Xbox One Bluetooth controllers, Xbox
Elite Wireless Controller Series 2, Switch Pro, Switch Joy-Con, Wii Remote, Wii U
Pro. (MAGIC-NS Lite is not compatible with DualShock 3)
USB Wireless Adapter
User manual
MAGIC-NS Lite
www.mayash.com
To quit the modication, release any button of R1/RB or R3 once you’ve got
your preferred vibration intensity.
There are 7 levels of the vibration intensity. The default one is 100%.
LED indicator becomes solid when connection is successful.
This device complies with pa 15 of the FCC Rules.
Operation is subject to the following two
conditions:(1) This device may not cause harmful
inteerence, and(2) this device must accept any
inteerence received, including inteerence that
may cause undesired operation.
System Settings
Controllers
and Sensors
Pro Controller Wired
Communication
ON
Switch
SEGA Genesis Mini
NEOGEO mini macOSWindowsPlayStation 3
SEGA Mega
Drive Mini
NEOGEO Arcade
Stick Pro
SEGA Astro
City Mini
Raspber Pi
LED Indicator
Red
Switch Switch Pro
PS3/Raspberry Pi/
PC (Dinput)
Raspberry Pi/
PC (Xinput)
macOS
NEOGEO Arcade
Stick Pro/
NEOGEO mini
SEGA MEGA DRIVE Mini/
SEGA Genesis Mini/
SEGA Astro City Mini
System mode
BluePurple
Yellow
Green Cyan
White