Quick Start Guide

Controller Compatibility
Quick Sta Guide
Modify the Vibration Intensity
System Compatibility
MAGIC-S PRO 2
lncludes
Connect your Bluetooth or wired USB controllers to your Switch, PC Windows, PS4, PS3, NEOGEO
mini, NEOGEO Arcade Stick Pro, PS Classic, SEGA MEGA DRIVE mini, SEGA Genesis Mini
enteainment system.
If you nd any issues or have any diculty operating the device,please reach out to us at
info@mayash.com and we will be more than happy to help you out. Update to the latest
rmware at www.mayash.com
Connect the adapter to your game console.
Connect the wired game controllers to the
adapter.
* LED Indicator blinks slowly: The Bluetooth is not connected yet.
* LED Indicator blinks quickly: The Bluetooth is Pairing.
* LED Indicator becomes solid: The connection is successful.
* Switch Pro mode (LED is purple): Go to System Setting >
Controller and Sensors > Turn on Pro Controller Wired
Communication.
* Bluetooth headset only works for Switch mode (LED is red).
MAGIC-S PRO 2 USB Type C Cable
Manual
Bluetooth Controllers
Wired USB Controllers
USB A-Male
Switch
SEGA Genesis Mini
NEOGEO mini
PS Classic Mini
WindowsPlayStation 3PlayStation 4
SEGA Mega Drive Mini NEOGEO Arcade Stick Pro
01
USB A-Female
02
LED Indicators
03
Wired Controllers Set UP
06
Bluetooth Controllers Set Up
05
Button on the side of the adapter
04
Switch Button
USB A-Male
USB A-Female
LED Indicator
System Settings
Controllers and Sensors
Pro Controller Wired Communication ON
Press the button sholy to SYNC the
controllers and the adapter. The indicator
blinks quickly.
To switch the modes, press and hold the
button on the side of the adapter for 3-5
seconds.
Switch PS3 PC
Connect the adapter into any spare USB po on your
game console.
Connect the adapter into any spare USB po on your game
console.
Connect the wired controller to the adapter. The wireless
controller that comes from your console will become a wired
controller by simply connecting a standard USB cable (with
exception of Xbox 360 which requires an ocial Microsoft
wired Xbox 360 controller).
Your controller is now ready to use.
To switch the modes, press and hold the button on the
side of the adapter for 3-5 seconds.The LED indicator
blinks slowly.
Turn on the Bluetooth controller, press the Button on the
side of the adapter, and then press the SYNC button on
your Bluetooth controller. The LED indicator blinks
quickly.
LED indicator becomes solid when connection is successful.
Note:
Press and hold the Button R1/RB and R3 for 3-5 seconds until the controller keeps rumbling.
(Please keep holding these two buttons until you nish the below whole process).
To modify the vibration intensity, press the D-Pad “Up” or “Down”.
To quit the modication, release any button of R1/RB or R3 once you’ve got your preferred
vibration intensity.
*
If the Bluetooth syncing failed, please connect the Bluetooth controller to the adapter using a USB cable (not
included in the packaging, you can purchase it separately). As soon as the controller is identied by the system,
you can remove the USB cable and sta to SYNC it again.
*
Special Remarks for Xbox Elite Wireless Controller Series 2
It may take a longer time to connect your Xbox Elite 2 and Magic-NS 2 adapter. The connection may be
disconnected sholy (The LED on the controller and the adapter blink) and then connected again during the
Bluetooth pairing process. Please wait patiently until the LED indicators on the controller and the adapter stop
blinking.
If the Bluetooth connection failed, you can repeat the above Bluetooth Controllers Set Up to t again. Before
a new connection, please make sure you pull out the adapter from the console system, and connect them
again, and resta your controller.
DualSense, DualShock 4, DualShock 3, Xbox Series X/S, Xbox One Bluetooth controllers, Xbox
Elite Wireless Controller Series 2, Switch Pro, Switch Joy-Con, Wii Remote, Wii U Pro.
DualSense, DualShock 4, DualShock 3,Xbox Bluetooth Controller, Switch Pro, ASTRO Gaming C40
TR Controller PlayStation 4, PlayStation 4 SCUF Vantage 2 Controller, SEGA MEGA DRIVE and
SEGA Genesis Mini USB Controller Pads, Logitech rumble gamepad F510 and F310, PS Classic
Controller, Switch Taiko Drum, PS4 Taiko Drum.
The wireless controller that comes from your console will become a wired controller by simply
connecting a standard USB cable (with exception of Xbox 360 which requires an ocial Microsoft
wired Xbox 360 controller). For best results, it is recommended that you use original Switch
Controllers, or genuine Xbox or PlayStation controllers and quality ceied USB cables.
System Compatibility
Switch, PS4, PS3, Windows,
NEOGEO mini, PS Classic,
NEOGEO Arcade Stick Pro,
SEGA MEGA DRIVE mini,
SEGA Genesis Mini, SEGA
Astro City Mini, Raspberry Pi
USB Wireless Adapter
mayash.com
There are 7 levels of the vibration intensity.
The default one is 100%.
0% 25% 37.5% 50% 62.5% 75% 100%
50% 62.5% 75% 87.5% 100% 125% 150%
Switch Pro mode vibration levels:
PS3, PC Xinput vibration levels:
50%
75% 87.5% 100% 125% 150%62.5%
D-Pad “Up”
D-Pad “Down”
Switch
Switch Pro
PS3/Raspberry Pi/
PC (Dinput)
Raspberry Pi/
PC (Xinput)
NEOGEO mini
PS Classic
NEOGEO Arcade
Stick Pro
SEGA MEGA DRIVE Mini
SEGA Genesis Mini
LED Indicator
System mode
Red Purple Blue Green Yellow Yellow Cyan White
MAGIC-S PRO
2