maycom MP-2000 USER’S GUIDE
Information to the user This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
CONTENTS 1. Introduction ………………………………………………………….. 1 2. Getting Started ……………………………………………………….. 2 2.1 System Requirements ……………………………………………….. 2 2.2 Unpacking ………………………………………………………….. 3 2.3 System Overview ………………………………………………….. 4 2.3.1 Button Controls ……………………………………………….. 4 2.3.2 LCD Display ……………………………………………. . 6 2.3.3 Inserting and Removing Flash Memory Cards …………………. 7 2.3.4 Connecting the Player to the PC ……………………………….. 7 2.4 Charging the Battery ……………………………………………….. 8 2.4.
1. INTRODUCTION Your new Special Edition MP-2000 is an easy-to -use, pocket-sized, state-ofthe-art digital music player. Your favorite digital music is combined in this small-but -powerful personal stereo system. Wherever you take the MP -2000, you can enjoy CD-quality, stereo sound.
2. Getting Started 2.1 System Requirements The following system is recommended: • • • • • • • Microsoft Windows 98/2000 Pentium 133MHz or faster 16MB RAM or higher 30MB minimum free hard disc space CD-ROM drive (8x or better recommended) 1 USB Port Internet Explorer 4.
2. Getting Started 2.2 Unpacking Your MP -2000 came with 8 components. Please take a moment to ensure the following items came in your box: MP -2000 Digital Music Player Direct USB Interface Cable w/ Internal Rechargeable Battery Installation Software Stereo Earphone Neck Strap D.C.
2. Getting Started 2.3 System Overview 2.3.
2.
2. Getting Started 2.3.
2. Getting Started 2.3.3 Inserting and Removing Flash Memory Cards 1. Turn player off. 2. Ensure the card is in the correct position. 3. Insert the card into the player, press firmly until you feel the card lock in place. 4. To remove the card, firmly grasp the card and slide the card out of the player. Do not pull the card out while music is playing. Always turn the player off before inserting or removing flash memory cards. 2.3.
2. Getting Started 2.4 Charging the Battery A built-in rechargeable NiMH Battery powers your MP -2000. Attaching the external battery pack (1xAA external battery holder) will extend playback time up to 10 hours. 2.4.1 Charging The Player 1. Turn the player off. 2. Remove the external battery pack if attached. 3. Connect the AC power adapter to the slot labeled DC IN located on the right side of the player and to the wall outlet. 4.
3. How use the Special Edition MP-2000 3.1 Power ON/OFF 3.1.1 Power ON 1. Hold down the ( ) button for 2 seconds. 2. The LCD display will show model number and installed software version for 4 seconds. 3. The player will start in either MUSIC mode, depending on the last shutdown.
3. How use the Special Edition MP-2000 3.1.2 Power OFF Hold down the STOP ( ) button for 2 seconds. While holding down the STOP button, the LCD will display “Powering Off”. To turn the player off during music playback, press the STOP ( ) button once to stop music play, then press and hold the STOP button to power off. Hold the ( ) button down until the “Powering Off” message disappears. In MUSIC mode only, the player will automatically power off after 1 minute of inactivity.
3. How use the Special Edition MP-2000 3.2 Modes of Operation 3.2.1 Music Mode Press the button on the keypad to start MUSIC mode.
3. How use the Special Edition MP-2000 3.3 Music Mode Functions This section describes the features available to you while enjoying music from your CompactFlashTM memory card. A memory card must be inserted before using the player in MUSIC mode 3.3.1 Selecting Music From Memory Card • • • Ensure player is in MUSIC mode by pressing the button. Press the ( ) or ( ) buttons to scan forward/backward to select a song.
3. How use the Special Edition MP-2000 3.3.4 Stopping Play ( Press the ( ) ) button once to stop music playback. If you hold down the ( ) button for more than two seconds, the player will shut off. 3.3.5 Volume Control • • Press the volume controls on the top side of the player to increase/decrease volume during playback. When you use the volume controls, the LCD will display the volume level, ranging from 00 to 30.
3. How use the Special Edition MP-2000 3.3.6 Intro Scan/Repeat One/Repeat All/Random Press ( ) once for INTRO playback. The INTRO icon will appear. The player will play the first 10 seconds of each song. Pressing ( ) twice will only repeat the currently selected song. The REPEAT ONE icon will appear. Press ( ) again to repeat all songs stored on the memory card. The REPEAT ALL icon will appear. Press ( ) a fourth time to play all songs in a random order. The RANDOM icon will appear.
3. How use the Special Edition MP-2000 3.3.7 A-B Sampling During music playback, press the ( ) button once to set the start point of the song segment you want to repeat. Press the ( ) button again to set the end point of the song segment. The player will repeat the song segment from point A to B. Press the ( playback. ) button a third time to return to normal The A-B Sampling function only works during music playback.
3. How use the Special Edition MP-2000 3.3.8 Preset Equalizer Settings The MP-2000 has the following preset equalizer settings: • • • • • Rock Jazz Dance Latin Flat To change the equalizer setting, press the ( ) button repeatedly until you reach your desired setting.
3. How use the Special Edition MP-2000 3.3.9 Changing LCD Display During music playback, you can change the information displayed in the LCD by pressing the ( ) button. After Pressing ( ) Button: This additional information will be displayed for 5 seconds. 3.3.10 Hold Function To lock the player button controls, press the HOLD button on the keypad. The word “HOLD” will be displayed in the LCD. To unlock, press the HOLD button a second time.
4. Troubleshooting Problem Cause / Remedy When I press the “ON” button, nothing happens. Battery may need charging, insert the DC power adapter. I pressed the PLAY button, but I can’t hear any music. Ensure player is on. Check the headphones to see if they are properly inserted into the player. Check the volume level. Check to see if the flash memory card has been properly inserted. The LCD display reads “No Media”. Turn off the player and insert a flash memory card. Turn the player back on.
4. Troubleshooting 4.0 Troubleshooting (continued) Problem Remedy Some songs will scroll the artist and song title while other songs only display the filename. This is not a problem associated with the player. Refer to your PC jukebox software for editing song information. None of the buttons are working. Check to see if the HOLD button has been pressed. You will see the HOLD icon appear in the LCD. To deactivate this locking feature, press the HOLD button again.
Maycom B/D, 280-5, Seoksu 2-Dong, Manan-Gu, Anyang-City, Kyoungki -Do, Korea Office) Tel : 82 31 470-7700 Fax : 82 31 470-7799 Factory) Tel : 82 31 470-7740 Fax : 82 31 470-7798 http://www.maycomcoltd.com e-mail : maycom@maycomcoltd.